SES 2007 VPN Configuration

VPN Settings on AMT Client:  (using the “Create a new Connection” Wizard)
General:

Host Name:  10.10.1.1  (IP address of Corporate Server)
Name of Connection:  VPN2Corp

Options:

Display progress while connecting

Security:

Select:  Typical (recommended settings)
Validaton: Require secured password
Select: Automatically use my Windows logon name and password (and domain if any)

Networking:

Type of VPN:  Automatic
Settings:  Check all three boxes

Enable LCP extensions
Enable software compression
Negotiate multi-link for single link connections

TCP/IP Properties:
Select:  Obtain and IP address automatically
Use the following DNS Server Addresses

10.10.1.1 (preferred)

10.10.1.2 (Alternate)

 Advanced Settings:

General:  select the Use Default gateway on remote network
DNS:  Add the DNS servers in the first box
Select:  Append primary and connection specific DNS Suffixes
DNS suffix for this connection:  corpamt.com  (note:  it doesn’t work if this is not set…)
Select:  Register this connection’s addresses in DNS
Select:  Use this connections’s DNS suffix in DNS registration

Advanced:

Windows Firewall Settings:

Make sure firewall is disabled
No changes to the Exceptions
Advanced:  deselect all boxes in connection settings

ICMP:  Allow incoming echo request
Allow incoming mask request
Allow incoming router request
Allow redirect

VPN connection settings on Corporate Network:
Use the “New Connection Wizard” to create a VPN connection
General:

No devices should be selected
Select:  Virtual Private Network:  Allow others to make private connections to my computer by tunneling through the internet or other network

Users:
Select Administrator.
Networking:  (Go into the properties for Internet Protocol (TCPIP)

Select:  Allow callers to access my local area network
Specify Address Range: 

10.10.1.130
10.10.1.150