• Next Thread Prev Thread

• Posts   Search Threads

• JaNa June 20, 2009 3:43 AM PDT    KEY Sequencies of Intel AMT terminal Hi all...  There is another question again.... :D :D  While I'm studying the manageability commander to get some idea about the terminal tool,  I reboot AMT machine using the system and terminal window ask to press F12 to choose boot media. But  while I'm pressing the F12 remote machine is not recognize the key event. Then I press all F1-12 keys and it recognizes only F8.  Can any one guide me why these sorts of thing are happening...  :) :) :) Another question is terminal ask some key combinations like <ESC><Ctrl><M>   So what is this ESC and how we give the key combination. Pls... some one guide me to enter these key combinations and why those functions keys are not recognizing...   Thnx............. :) JaNa :) Lance Atencio (Intel) June 22, 2009 9:30 AM PDT Rate   #1 Re: KEY Sequencies of Intel AMT terminal Hi JaNa, Please take a look at this thread. It has some related information on this topic and some possibly useful links. JaNa June 23, 2009 12:06 AM PDT Rate   #2 Reply To #1 Re: KEY Sequencies of Intel AMT terminal Quoting - Lance Atencio (Intel) Hi JaNa, Please take a look at this thread. It has some related information on this topic and some possibly useful links. hi Lance !! Even i post this thing also i had visited to the same thread.... and there were no answer any more... :( i also did the same thing "javierandrescaceres" did for the F12 key and it doesn't hepl for me also.... :( Are there any other thing for make some help for F12 thing......??? I also need to force reboot the machine to PXE and with out the F12 key it is worthless... I'm also still researching on this.... thanx... :) JaNa :) Lance Atencio (Intel) June 23, 2009 10:06 AM PDT Rate   #3 Reply To #2 Re: KEY Sequencies of Intel AMT terminal Hi JaNa, It is my understanding from that thread that there is a problem with some BIOS and some terminal software. There doesn't seem to be a fix for this problem other than getting a new BIOS (probably a different mother board) and/or different terminal software that both support the ASCII set needed. rogerb June 24, 2009 7:50 AM PDT Rate   #4 Re: KEY Sequencies of Intel AMT terminal Hi JaNa, Forcing a boot to PXE is an option that is supported by AMT, but isn't necessarily implemented by your BIOS vendor. If you need that, then get in touch with them and submit a support ticket to get it implemented in the future. Second, many terminal programs will allow you to submit the character codes to implement key-strokes in advance. You could program the terminal emulator to send the character codes to implement a F12 key sequence. I know that Ylian used to have the support for this in the DTK, but I'm not sure if it is still there. Again, if your system doesn't support the correct key sequences for implementing F12, then contact them and let them know that you want this fixed. That is the only way that you will get it in the future. Here is a link to a document on Microsoft's website that shows how terminal emulation support should be implemented in AMT SOL. Send this link to your BIOS vendor if you need to. http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/StandardizingOutOfBandManagementConsoleOutput090.doc Regards, Roger Andrew Schiestl (Intel) June 24, 2009 11:20 AM PDT Rate   #5 Reply To #4 Re: KEY Sequencies of Intel AMT terminal Quoting - rogerb Hi JaNa, Forcing a boot to PXE is an option that is supported by AMT, but isn't necessarily implemented by your BIOS vendor. If you need that, then get in touch with them and submit a support ticket to get it implemented in the future. Second, many terminal programs will allow you to submit the character codes to implement key-strokes in advance. You could program the terminal emulator to send the character codes to implement a F12 key sequence. I know that Ylian used to have the support for this in the DTK, but I'm not sure if it is still there. Again, if your system doesn't support the correct key sequences for implementing F12, then contact them and let them know that you want this fixed. That is the only way that you will get it in the future. Here is a link to a document on Microsoft's website that shows how terminal emulation support should be implemented in AMT SOL. Send this link to your BIOS vendor if you need to. http://download.microsoft.com/download/1/6/1/161ba512-40e2-4cc9-843a-923143f3456c/StandardizingOutOfBandManagementConsoleOutput090.doc Regards, Roger The DTK does support passing a series of keypresses, but Javier wasn't able to get it to work with a couple of different key sequences.  Then again, the data on what decimal values to try for the keypresses doesn't appear to match up to what was in the document you just provided, so maybe there's something new to try. If I'm interpreting the documentation right, it looks like the sequence in VT100 would <Escape> @, which in decimal code (and in a form that could be entered in the DTK) would translate to 27;64.  Well, also the time between the two keys should be less than two seconds, but I'm fairly certain that's true for the DTK functionality.  I'll have to see if that works on one of my test systems. One other important piece of information is that I believe it's possible to query whether a BIOS supports VT100+ (and by definition, the F12 key).  The GetRemoteControlCapabilities function that's part of the Remote Interface, and it returns an OEM defined Capabilities type.  This struct contains a Terminal Emulation integer, and if that integer contains 0x02, that should indicate that the F12 key should work (see page 206 of the Network Interface Guide in the latest SDK).

• = Best Answer

  Next Thread Prev Thread

Intel Software Network Forums Statistics

17,025 users have contributed to 48,317 threads and 172,754 posts to date.

For more complete information about compiler optimizations, see our Optimization Notice.