# Car up by 0.1 meter of the land ??

## Car up by 0.1 meter of the land ??

While exporting the mesh land from the max i already set the shape radius to 0.001 meter then why my car is up above the ground by 0.1 meter. Take a look on the picture and help me! I dont want my car to be an angel flying all the time in the air.

http://www.postimage.org/image.php?v=gx1htk5J

4 posts / 0 new
For more complete information about compiler optimizations, see our Optimization Notice.
Quoting - xyz_is_here While exporting the mesh land from the max i already set the shape radius to 0.001 meter then why my car is up above the ground by 0.1 meter.

Hi xyz_is_here,

What is the convex radius on your car? Can you send a VDB of the problem as descibed in "Using the Visual Debugger Game Side" in the User Guide? Be sure to include the "Convex Radius" viewer.

Thanks,
Dave

Quoting - HavokDave
Hi xyz_is_here,

What is the convex radius on your car? Can you send a VDB of the problem as descibed in "Using the Visual Debugger Game Side" in the User Guide? Be sure to include the "Convex Radius" viewer.

Thanks,
Dave

Thanx for the reply Dave :)

Convex radius of my car has been already set to 0.01 meter. Although while doing ray interesection check its giving the correct result. Also i had tried to reduce the radius of car's wheel as i might had put wrong data( just a wild guess) but it didn't worked. Also i tried to drop the car from the height of 10 meter and it jumped off right above 0.1 meter of the ground. As i am right now away of my system so i cant give here VDB file. Just give me some possible causes that it could lead this. I will try all and will make it working.

Quoting - xyz_is_here Quoting - HavokDave
Hi xyz_is_here,

What is the convex radius on your car? Can you send a VDB of the problem as descibed in "Using the Visual Debugger Game Side" in the User Guide? Be sure to include the "Convex Radius" viewer.

Thanks,
Dave

Thanx for the reply Dave :)

Convex radius of my car has been already set to 0.01 meter. Although while doing ray interesection check its giving the correct result. Also i had tried to reduce the radius of car's wheel as i might had put wrong data( just a wild guess) but it didn't worked. Also i tried to drop the car from the height of 10 meter and it jumped off right above 0.1 meter of the ground. As i am right now away of my system so i cant give here VDB file. Just give me some possible causes that it could lead this. I will try all and will make it working.

Problem is solved. It was due to the different center of mass for mesh being used for rendering data.