Hi,
I'm really struggling to set up the modeline on my ubuntu mythtv
fronted for my Sony KDL32V2500 lcd TV. I have tried numerous setting
and have had no joy. I have feisty fawn installed on an old Toshiba A2
laptop which has an Intel 855GM integrated graphics card. I have
installed 915 resolution drivers but still no mater what I only get
1024 x 768!!
Here is my xorg.conf, as you can see tried loads of different modelines:
Identifier "Intel Corporation 82852/855GM Integrated Graphics Device"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "SonyBravia"
HorizSync 47.7
VertRefresh 84.72
#ModeLine "1360x768" 171.200 1360 1430 1542 1792 768 771 777 795 +hsync +vsync
#ModeLine "1360x768" 85.500 1360 1424 1536 1792 768 771 777 795 +Hsync +Vsync
#ModeLine "1360x768" 85.500 1360 1430 1542 1792 768 771 777 795 +hsync +vsync
#ModeLine "1280x768" 79.500 1280 1350 1478 1664 768 771 778 798 -hsync +vsync
Modeline "1360x768_60.00" 84.72 1360 1424 1568 1776 768 769 772 795 -Hsync +Vsync
EndSection
I have connected my XP laptop to the screen and managed to get the
native resolution of 1360 x768. Whilst in Windows I have run MonInfo
the details are:
Windows description......... Sony Monitor
Manufacturer description.... SONY TV
Manufacturer................ Sony
----------------------------
Plug and Play ID............ SNYA500
Serial number............... n/a
EDID data source............ I2C bus (real-time)
----------------------------
Manufacture date............ 2005, ISO week 42
EDID revision............... 1.3
Display type and signal..... Analog 0.700,0.300 (1.0V p-p)
Sync input support.......... Separate
Screen size................. n/a
Power management............ n/a
Color characteristics
Display gamma............... 2.20
Red chromaticity............ Rx 0.645 - Ry 0.335
Green chromaticity.......... Gx 0.265 - Gy 0.585
Blue chromaticity........... Bx 0.140 - By 0.065
White point (default)....... Wx 0.282 - Wy 0.284
Timing characteristics
VESA GTF support............ Not supported
Horizontal scan range....... 30-49kHz
Vertical scan range......... 57-63Hz
Video bandwidth............. 90MHz
Extension blocks............ n/a
Timing recommendation #1.... 1360x768 at 60Hz
Modeline................ "1360x768" 85.500 1360 1430 1542 1792 768 771 777 795 +hsync +vsync
Timing recommendation #2.... 1280x768 at 60Hz
Modeline................ "1280x768" 79.500 1280 1350 1478 1664 768 771 778 798 -hsync +vsync
Standard timings supported
640 x 480 at 60Hz - IBM VGA
640 x 480 at 60Hz - VESA
720 x 400 at 70Hz - IBM VGA
800 x 600 at 60Hz - VESA
1024 x 768 at 60Hz - VESA
1280 x 768 at 60Hz - Sony
1360 x 768 at 60Hz - Sony
Raw EDID base
00: 00 FF FF FF FF FF FF 00 4D D9 00 A5 01 01 01 01
10: 2A 0F 01 03 08 00 00 78 0A 3F F7 A5 55 43 95 23
20: 10 48 48 A1 08 00 31 40 45 40 61 40 01 01 01 01
30: 01 01 01 01 01 01 66 21 50 B0 51 00 1B 30 46 70
40: 36 00 00 00 00 00 00 1E 0E 1F 00 80 51 00 1E 30
50: 46 80 37 00 00 00 00 00 00 1C 00 00 00 FD 00 39
60: 3 F 1E 31 09 00 0A 20 20 20 20 20 20 00 00 00 FC
70: 00 53 4F 4E 59 20 54 56 0A 20 20 20 20 20 00 79
Display adapter
Adapter description......... Auxiliary port
Adapter device ID........... 0x27A68086
Display settings............ n/a
User/computer information
Registered user name........
Registered organization..... n/a
Network user name........... Jim
Network computer name....... LAPDOG-SMURF
Windows version ............ Windows XP
Windows build .............. 5.01.2600 Service Pack 2
Installation date .......... 5/1/2007 12:00:00 PM
and powerstrip gave the following:
1360x768=1360,70,112,250,768,3,6,18,171200,512
Generic timing details for 1360x768:
HFP=70 HSW=112 HBP=250 kHz=96 VFP=3 VSW=6 VBP=18 Hz=120
VESA detailed timing:
PClk=171.20 H.Active=1360 H.Blank=432 H.Offset=54 HSW=112 V.Active=768 V.Blank=27 V.Offset=3 VSW=6
Linux modeline parameters:
"1360x768" 171.200 1360 1430 1542 1792 768 771 777 795 +hsync +vsync
Any help would be greatly appreciated!!
Cheers,
Jim
