KVM doesn't work with the latest Manageability Commander Tool (v. 7.0.11340.2)

KVM doesn't work with the latest Manageability Commander Tool (v. 7.0.11340.2)

Portrait de Eurosw_vv2
Eurosw_vv2
ven, 17/02/2012 - 03:23

Hi,

I can't KVM into Intel QM57 based computer (AMT
v6.0) using the latest Manageability Commander Tool (v. 7.0.11340.2). I
can connect and take control of the computer using Serial-over LAN, but
KVM always fails.

KVM works fine with an earlier version of the tool (v6.0.10097.2).

Is there something that needs to be done to make KVM work with the latest commander tool?

Thanks,

Vladimir

RSS Haut
3 posts / 0 nouveau(x)
Dernière contribution
Reportez-vous à notre Notice d'optimisation pour plus d'informations sur les choix et l'optimisation des performances dans les produits logiciels Intel.
Portrait de Gael Hofemeier (Intel)
Gael Hofemeier (Intel)
sam, 18/02/2012 - 20:29

Could you try the latest version of the "Open" DTK? Hopefully this one will work for you. Please let us know.

Follow me on Twitter: @GH_IntelBlogs Facebook: https://www.facebook.com/gh.intelblogs
Haut
Portrait de Larry Moccardine (Intel)
Larry Moccardine (Intel)
lun, 27/02/2012 - 10:47

Hello Vladimir,

Are you receiving an error message when you attempt to connect to your client via KVM? Also, what platform are you using? (OEM, AMT version, BIOS version)

I would also recommend using the Open source DTK as Gal mentioned to see if this resolves your issue why we look into this.

The Open sourse version can be found here: http://opentools.homeip.net/open-manageability

Haut

Connectez-vous pour laisser un commentaire.