In this article, we will be configuring Open vSwitch* with Data Plane Development Kit (OvS-DPDK) on Ubuntu Server* 17.04. With the new release of this package, OvS-DPDK has been updated to use the latest release of both the DPDK (v16.11.1) and Open vSwitch (v2.6.1) projects. We took it for a test drive and were impressed with how seamless and easy it is to use OvS-DPDK on Ubuntu*.
We configured OvS-DPDK with two vhost-user ports and allocated them to two virtual machines (VMs). We then ran a simple iPerf3* test case. The following diagram captures the setup.
To install OvS-DPDK on our system, run the following commands. Also, we will update ovs-vswitchd to use the ovs-vswitchd-dpdk package.
sudo apt-get install openvswitch-switch-dpdk sudo update-alternatives --set ovs-vswitchd /usr/lib/openvswitch-switch -dpdk/ovs-vswitchd-dpdk
Then restart the ovs-vswitchd service with the following command to use the DPDK:
sudo systemctl restart openvswitch-switch.service
The system we are using in this demo is a 2-socket, 22 cores per socket, Intel® Hyper-Threading Technology (Intel® HT Technology) enabled server, giving us 88 logical cores total. The CPU model used is an Intel® Xeon® CPU E5-2699 v4 @ 2.20GHz. To configure Ubuntu for optimal use of OvS-DPDK, we will change the GRUB* command-line options that are passed to Ubuntu at boot time for our system. To do this we will edit the following config file:
Change the setting GRUB_CMDLINE_LINUX_DEFAULT to the following:
GRUB_CMDLINE_LINUX_DEFAULT="default_hugepagesz=1G hugepagesz=1G hugepages=16 hugepagesz=2M hugepages=2048 iommu=pt intel_iommu=on isolcpus=1-21,23-43,45-65,67-87"
This makes GRUB aware of the new options to pass to Ubuntu during boot time. We set
isolcpus so that the Linux* scheduler would only run on two physical cores. Later, we will allocate the remaining cores to the DPDK. Also, we set the number of pages and page size for hugepages. For details on why hugepages are required, and how they can help to improve performance, please see the explanation in the Getting Started Guide for Linux on dpdk.org.
isolcpus setting varies depending on how many cores are available per CPU.
Also, we will edit /etc/dpdk/dpdk.conf to specify the number of hugepages to reserve on system boot. Uncomment and change the setting NR_1G_PAGES to the following:
Depending on your system memory size, you may increase or decrease the number of 1G pages.
After both files have been updated run the following commands:
sudo update-grub sudo reboot
A reboot will apply the new settings. Also during the boot enter the BIOS and enable:
- Intel® Virtualization Technology (Intel® VT-x)
- Intel® Virtualization Technology (Intel® VT) for Directed I/O (Intel® VT-d)
Once logged back into your Ubuntu session we will create a mount path for our hugepages:
sudo mkdir -p /mnt/huge sudo mkdir -p /mnt/huge_2mb sudo mount -t hugetlbfs none /mnt/huge sudo mount -t hugetlbfs none /mnt/huge_2mb -o pagesize=2MB sudo mount -t hugetlbfs none /dev/hugepages
To ensure that the changes are in effect, run the commands below:
grep HugePages_ /proc/meminfo cat /proc/cmdline
If the changes took place, your output from the above commands should look similar to the image below:
To initialize the
ovs-vsctl database, a one-time step, we will run the command ‘
sudo ovs-vsctl --no-wait init’. The OvS database will contain user set options for OvS and the DPDK. To pass in arguments to the DPDK we will use the command-line utility as follows:
‘sudo ovs-vsctl ovs-vsctl set Open_vSwitch . <argument>’.
Additionally, the OvS-DPDK package relies on the following config files:
/etc/dpdk/dpdk.conf – Configures hugepages
/etc/dpdk/interfaces – Configures/assigns network interface cards (NICs) for DPDK use
For more information on OvS-DPDK, unzip the following files:
Next, we will configure OvS to use DPDK with the following command:
sudo ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init=true
Once the OvS is set up to use DPDK, we will change one OvS setting, two important DPDK configuration settings, and bind our NIC devices to the DPDK.
The following commands are used to configure these settings:
sudo ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-lcore-mask=0xfffffbffffefffffbffffe sudo ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,1024" sudo ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=1E0000000001E
For dpdk-lcore-mask we used a mask of
0xfffffbffffefffffbffffe to specify the CPU cores on which dpdk-lcore should spawn. In our system, we have the dpdk-lcore threads spawn on all cores except cores 0, 22, 44, and 66. Those cores are reserved for the Linux scheduler. Similarly, for the
pmd-cpu-mask, we used the mask
1E0000000001E to spawn four pmd threads for non-uniform memory access (NUMA) Node 0, and another four pmd threads for NUMA Node 1. Lastly, since we have a two-socket system, we allocate 1 GB of memory per NUMA Node; that is, “
1024, 1024”. For a single-socket system, the string would just be “
For our sample test case, we will create a bridge and add two DPDK vhost-user ports. To create an OvS bridge and two DPDK ports, run the following commands:
sudo ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev sudo ovs-vsctl add-port br0 vhost-user1 -- set Interface vhost-user1 type=dpdkvhostuser sudo ovs-vsctl add-port br0 vhost-user2 -- set Interface vhost-user2 type=dpdkvhostuser
To ensure that the bridge and vhost-user ports have been properly set up and configured, run the command:
sudo ovs-vsctl show
If all is successful you should see output like the image below:
To bind your NIC device to the DPDK you must run the
dpdk-devbind command. For example, to bind eth1 from the current driver and move to use vfio-pci driver, run:
dpdk-devbind --bind=vfio-pci eth1.To use the vfio-pci driver, run modsprobe to load it and its dependencies.
This is what it looked like on my system, with 4 x 10 Gb interfaces available:
sudo modprobe vfio-pci sudo dpdk-devbind --bind=vfio-pci ens785f0 sudo dpdk-devbind --bind=vfio-pci ens785f1 sudo dpdk-devbind --bind=vfio-pci ens785f2 sudo dpdk-devbind --bind=vfio-pci ens785f3
To check whether the NIC cards you specified are bound to the DPDK, run the command:
sudo dpdk-devbind --status
If all is correct, you should have an output similar to the image below:
Creating VMs is out of the scope of this document. Once we have two VMs created (in this example, virtual disks us17_04vm1.qcow2 and us17_04vm2.qcow2), the following commands show how to use the DPDK vhost-user ports we created earlier.
sudo qemu-system-x86_64 -m 1024 -smp 4 -cpu host -hda /home/user/us17_04vm1.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic \ -chardev socket,id=char1,path=/run/openvswitch/vhost-user1 \ -netdev type=vhost-user,id=mynet1,chardev=char1,vhostforce \ -device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1 \ -object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc \ -virtfs local,path=/home/user/iperf_debs,mount_tag=host0,security_model=none,id=vm1_dev
sudo qemu-system-x86_64 -m 1024 -smp 4 -cpu host -hda /home/user/us17_04vm2.qcow2 -boot c -enable-kvm -no-reboot -net none -nographic \ -chardev socket,id=char2,path=/run/openvswitch/vhost-user2 \ -netdev type=vhost-user,id=mynet2,chardev=char2,vhostforce \ -device virtio-net-pci,mac=00:00:00:00:00:02,netdev=mynet2 \ -object memory-backend-file,id=mem,size=1G,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc \ -virtfs local,path=/home/user/iperf_debs,mount_tag=host0,security_model=none,id=vm2_dev \
In the previous step, we configured two VMs, each with a Virtio* NIC that is connected to the OvS-DPDK bridge.
Configure the NIC IP address on both VMs to be on the same subnet. Install iPerf3 from http://software.es.net/iperf, and then run a simple network test case. On one VM, start iPerf3 in server mode
iperf3 -s and run the iperf3 client on another VM,
iperf3 –c server_ip. The network throughput and performance varies, depending on your system hardware capabilities and configuration.
From the above images, we observe that the OvS-DPDK transfer rate is roughly ~2.5x greater than OvS without DPDK.
Ubuntu has standard packages available for using OvS-DPDK. In this article, we discussed how to install, configure, and use this package for enhanced network throughput and performance. We also covered how to configure a simple OvS-DPDK bridge with DPDK vhost-user ports for an inter-VM application use case. Lastly, we observed that the OvS with DPDK gave us ~2.5x greater transfer rate than OvS without DPDK on a simple inter-vm test case on our system.
Yaser Ahmed is a software engineer at Intel Corporation who has an MS degree in Applied Statistics from DePaul University and a BS degree in Electrical Engineering from the University of Minnesota.
O desempenho varia de acordo com o uso, a configuração e outros fatores. Saiba mais em https://edc.intel.com/content/www/br/pt/products/performance/benchmarks/overview/.