• 08/10/2019
  • Public Content

Host Based Configuration via OS

This configuration is performed locally (host-based configuration) using the settings in a configuration profile. The configuration profile is saved as an XML file named Profile.xml, and will be located in the same folder as the Configuration Utility.
Single-System Configuration
Perform an OS-based configuration by launching ACUWizard as Admin. Once it’s launched follow these steps:
  1. Create the profile by opening the ACUWizard, and then selecting
    Configure/Unconfigure this System
    .
    Configuration Methods
    Figure 1.
    Configuration methods.
  2. Select
    Configure via Windows
    .
  3. Select
    Next
    .
  4. In the
    Intel® AMT Configuration Utility –
    select
    Configure via Windows
    and do the following:
    1. In
      Current Password
      , type a password. This is the password for the Intel® MEBX, if the password has not been changed, the default password is 
      admin
      .
    2. Fill in
      New Password
      and
      Confirm Password
      .
      Example of Configure via Windows
      Figure 2.
      Example of Configure via Windows
      .
    3. Select
      Override Default Settings
      , and then click
      Network Settings
      .
      1. If OS is set as DHCP enabled, verify the settings. Typical settings are:
      2. Use the Following as FQDN – Select
        Host Name
        .
      3. Select the
        Shared FQDN
        option.
      4. Select
        Get IP from DHCP Server.
      5. Update the DNS directly or via DHCP option 81.
      6. Select
        OK
    4. If the OS IP is static, select the
      Change the IP section
      radio button and then select
      Use the same IP as the host.
    5. Select
      Next
      .
      Example of Network Settings
      Figure 3.
      Example of Network Settings.
  5. The software saves the profile for potential future use. Enter and confirm the
    Encryption Password.
  6. Select
    Configure
    .
  7. Configuring your System Dialog
    box launches. Wait until it closes, which can take a few minutes.
  8. Screen should now show
    Configuration Complete.
  9. Select
    Finish
    .
 
*No product or component can be absolutely secure.

Product and Performance Information

1

Intel's compilers may or may not optimize to the same degree for non-Intel microprocessors for optimizations that are not unique to Intel microprocessors. These optimizations include SSE2, SSE3, and SSSE3 instruction sets and other optimizations. Intel does not guarantee the availability, functionality, or effectiveness of any optimization on microprocessors not manufactured by Intel. Microprocessor-dependent optimizations in this product are intended for use with Intel microprocessors. Certain optimizations not specific to Intel microarchitecture are reserved for Intel microprocessors. Please refer to the applicable product User and Reference Guides for more information regarding the specific instruction sets covered by this notice.

Notice revision #20110804