• 07/14/2017
  • Public Content
Contents

Create a Low-Profile Enclosure for the Intel® Joule™ Developer Kit

You can create a low-profile enclosure for the developer kit and fan with the downloadable STL files. These files are shared with you under the Creative Commons license also included in the downloaded zip file.
 
  1. 3D print or acquire the low-profile housing pieces; 1 base and 1 cover.
  2. Remove any knockouts needed for your design:
  3. Remove standoffs from expansion board, if installed.
  4. Place expansion board onto the base, aligning with the screw holes, and ensuring that all exposed areas align with their respective knockouts.
  5. Set cover over base and secure with four M2 x 8mm screws from the bottom side.
Examples
Fully assembled 3D printed low-profile chassis with Intel® Joule™ Developer Kit
With fan
With fan and heatsink
 

Product and Performance Information

1

Intel's compilers may or may not optimize to the same degree for non-Intel microprocessors for optimizations that are not unique to Intel microprocessors. These optimizations include SSE2, SSE3, and SSSE3 instruction sets and other optimizations. Intel does not guarantee the availability, functionality, or effectiveness of any optimization on microprocessors not manufactured by Intel. Microprocessor-dependent optimizations in this product are intended for use with Intel microprocessors. Certain optimizations not specific to Intel microarchitecture are reserved for Intel microprocessors. Please refer to the applicable product User and Reference Guides for more information regarding the specific instruction sets covered by this notice.

Notice revision #20110804