• 07/14/2017
  • Public Content
Contents

Module Connectors

The Intel® Joule™ module utilizes two separate, connectors, (J6 & J7) to break out system buses, power and GPIO signals, while two additional connectors (JCAM1 & JCAM2) are dedicated to MIPI* CSI imaging devices.
  • All I/O signals are 1.8V with the exception of USB, MIPI-CSI, DSI and PCIe which adhere to their respective standards.
  • Module connectors J6 and J7 (2x50) are common with Hirose Electric Co LTD* Part Number DF40C-100DP-0.4V and mate with Hirose Electric Co LTD* Part Number DF40C-100DS-0.4V, or compatible.
  • JCAM1 and JCAM2 provide MIPI based imaging interfaces, dedicated to MIPI cameras via 2x20 Hirose* Part Number BM14B(0.8)-40DS-0.4V connectors
    • Mating connector for camera module Flex Printed Circuit Board attachment: Hirose* BM14B(0.8)-40DP-0.4V
Module dimensions
See the Mechanical and Environmental topic for complete module and connector dimensions.
 

Product and Performance Information

1

Intel's compilers may or may not optimize to the same degree for non-Intel microprocessors for optimizations that are not unique to Intel microprocessors. These optimizations include SSE2, SSE3, and SSSE3 instruction sets and other optimizations. Intel does not guarantee the availability, functionality, or effectiveness of any optimization on microprocessors not manufactured by Intel. Microprocessor-dependent optimizations in this product are intended for use with Intel microprocessors. Certain optimizations not specific to Intel microarchitecture are reserved for Intel microprocessors. Please refer to the applicable product User and Reference Guides for more information regarding the specific instruction sets covered by this notice.

Notice revision #20110804