Online Guide for the Intel® Joule™ Module

  • 07/14/2017
  • Public Content
Contents

SD Card Interface

SD card interface features
  • Host clock up to 208 MHz (SDR 104)
  • Supports card detection (insertion/removal) with dedicated card detection signal
  • Meets SD Host Controller Standard Specification version 3.0
  • Meets SD Physical Layer Specification version 3.01
  • Only supports SD memory
  • Supports 1.8v signal levels directly; requires an external level shifter to support devices that operate above 1.8V
SD card signal group specifications
The Intel® Joule™ module provides a SD Card interface through the board-to-board connectors for expansion board usage.
See also: SD Card Interface in the Expansion Board Design Guide, and SD Card Subsystem in the Expansion Board Hardware Datasheet.
 

Product and Performance Information

1

Intel's compilers may or may not optimize to the same degree for non-Intel microprocessors for optimizations that are not unique to Intel microprocessors. These optimizations include SSE2, SSE3, and SSSE3 instruction sets and other optimizations. Intel does not guarantee the availability, functionality, or effectiveness of any optimization on microprocessors not manufactured by Intel. Microprocessor-dependent optimizations in this product are intended for use with Intel microprocessors. Certain optimizations not specific to Intel microarchitecture are reserved for Intel microprocessors. Please refer to the applicable product User and Reference Guides for more information regarding the specific instruction sets covered by this notice.

Notice revision #20110804