• 07/14/2017
  • Public Content
Contents

Maximum Current Draw

Electrical specifications for each power source are as follows:
Source
Parameter
Min
Typical
Max
Units
+1P8V
Voltage
1.71
1.8
1.89
v
Current
 
 
1.8
A
+V3P3V
Voltage
3.135
3.3
3.465
V
Current
 
 
1.4
A
+V5P0V
Voltage
4.75
5.0
5.25
V
Current
 
 
1.0
A
 
The total combined power for +V1P8V, +V3P3V and +V5P0V should not exceed .4.5 W given 12 V to VDCIN. This is assuming that the USB ports are not sourcing 900 mA to devices for OTG mode. If your use case requires full OTG current, then the OTG power should be subtracted from 4.5 W to find your new max power allowed to the IO breakout connectors. It is not recommended to operate both USB-C and USB-A ports at full OTG current loading simultaneously.

Product and Performance Information

1

Intel's compilers may or may not optimize to the same degree for non-Intel microprocessors for optimizations that are not unique to Intel microprocessors. These optimizations include SSE2, SSE3, and SSSE3 instruction sets and other optimizations. Intel does not guarantee the availability, functionality, or effectiveness of any optimization on microprocessors not manufactured by Intel. Microprocessor-dependent optimizations in this product are intended for use with Intel microprocessors. Certain optimizations not specific to Intel microarchitecture are reserved for Intel microprocessors. Please refer to the applicable product User and Reference Guides for more information regarding the specific instruction sets covered by this notice.

Notice revision #20110804