• 07/14/2017
  • Public Content
Contents

DC Power Jack Input (J4)

The J4 power jack on the expansion board is a surface mounted, RoHS compliant device. The connector is manufactured by CUI INC* as model number: PJ-002AH-SMT-TR.
  • The inner pin is positive voltage becoming the +VDC_IN signal on the expansion board. The +VDC_IN signal passes through a discrete circuit that provides polarity protection and filtering before reaching the input power multiplexer, U18.
  • Outer ring is ground; this is common with module ground and connector shields.
  • The jack accepts a 5.5 mm plug to a depth of 8.9 mm.
Refer to the manufacturer’s datasheet for additional details and the latest information.
Electrical Specifications
Source
Item
Min
Typ
Max
Units
Conditions
DC Power Jack
V
DCIN
7.0
12.0
12.4
V
At V
DCIN
pin of DC power jack
I
DCIN
 
 
2.7
A
At V
DCIN
of 12.0 volts
Note: Minimum voltage 7.0 is only for lightly loaded configurations. Attaching accessories will require the more typical voltage of 12.0.

Product and Performance Information

1

Intel's compilers may or may not optimize to the same degree for non-Intel microprocessors for optimizations that are not unique to Intel microprocessors. These optimizations include SSE2, SSE3, and SSSE3 instruction sets and other optimizations. Intel does not guarantee the availability, functionality, or effectiveness of any optimization on microprocessors not manufactured by Intel. Microprocessor-dependent optimizations in this product are intended for use with Intel microprocessors. Certain optimizations not specific to Intel microarchitecture are reserved for Intel microprocessors. Please refer to the applicable product User and Reference Guides for more information regarding the specific instruction sets covered by this notice.

Notice revision #20110804