Serial communication for macOS* hosts
- Download and install the FTDI drivers (http://www.ftdichip.com/Drivers/VCP.htm) for use on the host computer.
- Plug the Micro USB cable (Type B) into a regular Type A USB port on your host computer.
- Plug the other end of the cable in to theMicro USB Type B porton the development platform.
- Launch the Terminal application on your host computer.Quick launch tip: Launch Spotlight (Cmd + Space), and then typeterminal.
- In the Terminal window, use thelscommand to list any connected usbserial devices. Type:ls /dev/cu.usbserial-*
- Connected USB devices will be displayed to the screen. Confirm that a device with a name starting with /dev/cu.usbserial is displayed. This should be your development platform.In this example, the development platform's device name is /dev/cu.usbserial-A402EXOG.
- Use thescreenutility in Terminal to connect to the development platform using your development platform's unique device name and the baud-rate115200. For example:screen /dev/xx.usbserial-XXXXXXXX 115200
- If prompted, enter your computer user password to continue.
- In this example, the command would be:
Failing to close the Screen connection fully may stop you from being able to log in next time without rebooting the development platform. Close Screen sessions every time you are done with your serial connection.
To end a Screen session, type
Ctrl + A, then
Ctrl + K. At the prompt, enter