DisplayPort Arria® 10 FPGA IP Design Example User Guide

ID 683050
Date 4/29/2024
Public
Document Table of Contents

2.11. Transceiver Lane Configurations

If you want to configure your design to use 1, 2 or 4 lanes targeting different versions of Bitec FMC daughter cards, you have to configure the pin assignments accordingly in the Quartus® Prime Pro Settings File (QSF).
To configure the DisplayPort Intel® FPGA IP design example using 1, 2 or 4 lanes, follow these steps:
  1. In both the DisplayPort Source and Sink parameter editors, set the Maximum lane count parameter to 1, 2 or 4.
  2. Generate the design example.
  3. Make the following assignments in the Assignment Editor.
    Table 23.  Pin Assignments for Bitec FMC Revision 8 or Earlier
    DisplayPort Pin Location

    ( Arria® 10 Development Kit)

    Four Lanes Two Lanes One Lane
    Source BC7 fmca_dp_c2m_p[0] Not applicable Not applicable
    BC8 fmca_dp_c2m_n[0]
    BD5 fmca_dp_c2m_p[1]
    BD6 fmca_dp_c2m_n[1]
    BB5 fmca_dp_c2m_p[2] fmca_dp_c2m_p[0]
    BB6 fmca_dp_c2m_n[2] fmca_dp_c2m_n[0]
    BC3 fmca_dp_c2m_p[3] fmca_dp_c2m_p[1] fmca_dp_c2m_p[0]
    BC4 fmca_dp_c2m_n[3] fmca_dp_c2m_n[1] fmca_dp_c2m_n[0]
    Sink AW7 fmca_dp_m2c_p[0] fmca_dp_m2c_p[0] fmca_dp_m2c_p[0]
    AW8 fmca_dp_m2c_n[0] fmca_dp_m2c_n[0] fmca_dp_m2c_n[0]
    BA7 fmca_dp_m2c_p[1] fmca_dp_m2c_p[1] Not applicable
    BA8 fmca_dp_m2c_n[1] fmca_dp_m2c_n[1]
    AY5 fmca_dp_m2c_p[2] Not applicable
    AY6 fmca_dp_m2c_n[2]
    AV5 fmca_dp_m2c_p[3]
    AV6 fmca_dp_m2c_n[3]
    Transceiver Avalon® Memory-Mapped Interface Group XCVR_RECONFIG_GROUP Enable Disable Disable
    Table 24.  Pin Assignments for Bitec FMC Revision 10
    DisplayPort Pin Location ( Arria® 10 Development Kit) Four Lanes Two Lanes One lane
    Source BC7 fmca_dp_c2m_p[0] fmca_dp_c2m_p[0] fmca_dp_c2m_p[0]
    BC8 fmca_dp_c2m_n[0] fmca_dp_c2m_n[0] fmca_dp_c2m_n[0]
    BD5 fmca_dp_c2m_p[1] fmca_dp_c2m_p[1] Not Applicable
    BD6 fmca_dp_c2m_n[1] fmca_dp_c2m_n[1]
    BB5 fmca_dp_c2m_p[2] Not Applicable
    BB6 fmca_dp_c2m_n[2]
    BC3 fmca_dp_c2m_p[3]
    BC4 fmca_dp_c2m_n[3]
    Sink AW7 fmca_dp_m2c_p[0] fmca_dp_m2c_p[0] fmca_dp_m2c_p[0]
    AW8 fmca_dp_m2c_n[0] fmca_dp_m2c_n[0] fmca_dp_m2c_n[0]
    BA7 fmca_dp_m2c_p[1] fmca_dp_m2c_p[1] Not Applicable
    BA8 fmca_dp_m2c_n[1] fmca_dp_m2c_n[1]
    AY5 fmca_dp_m2c_p[2] Not Applicable
    AY6 fmca_dp_m2c_n[2]
    AV5 fmca_dp_m2c_p[3]
    AV6 fmca_dp_m2c_n[3]
    Merging of Reconfiguration Interfaces XCVR_RECONFIG_GROUP Enable Enable Enable
    Table 25.  Pin Assignments for Bitec FMC Revision 11
    DisplayPort Pin Location

    ( Arria® 10 Development Kit)

    Four Lanes Two Lanes One Lane
    Source BC7 fmca_dp_c2m_p[0] fmca_dp_c2m_p[0] fmca_dp_c2m_p[0]
    BC8 fmca_dp_c2m_n[0] fmca_dp_c2m_n[0] fmca_dp_c2m_n[0]
    BD5 fmca_dp_c2m_p[1] fmca_dp_c2m_p[1] Not applicable
    BD6 fmca_dp_c2m_n[1] fmca_dp_c2m_n[1]
    BB5 fmca_dp_c2m_p[2] Not applicable
    BB6 fmca_dp_c2m_n[2]
    BC3 fmca_dp_c2m_p[3]
    BC4 fmca_dp_c2m_n[3]
    Sink AW7 fmca_dp_m2c_p[0] Not applicable Not applicable
    AW8 fmca_dp_m2c_n[0]
    BA7 fmca_dp_m2c_p[1]
    BA8 fmca_dp_m2c_n[1]
    AY5 fmca_dp_m2c_p[2] fmca_dp_m2c_p[0]
    AY6 fmca_dp_m2c_n[2] fmca_dp_m2c_n[0]
    AV5 fmca_dp_m2c_p[3] fmca_dp_m2c_p[1] fmca_dp_m2c_p[0]
    AV6 fmca_dp_m2c_n[3] fmca_dp_m2c_n[1] fmca_dp_m2c_n[0]
    Transceiver Avalon® Memory-Mapped Interface Group XCVR_RECONFIG_GROUP Enable Disable Disable
    Note: You can disable the non-applicable pin assignments in the Assignment Editor.