Cannot start-up the FORTRAN/C debugger inside MVS2008

Cannot start-up the FORTRAN/C debugger inside MVS2008

Bild des Benutzers rdees

I've recently recompiled my mixed FORTRAN/C  code and it run great as long as I use the "Release" version.  After I recompile with the "Debug" version, I cannot start-up the debugger.  The code apparantly builds properly (i.e. I received a 'Successful build' message and manifest data, as usual, and I receive an executable code.  But, when I go to the top menu in MVS2008 under the "Debug" tab, the "Start Debug F5" line is grayed out, and, I cannot do anything.

When I click on the newly created executable code (outside of MVS2008) I get the following message:  "Entry point not found" - The procedure entry point mkl_serv_get_max_threads could not be located in the dynamic link library mkl_sequential.dll."   I'm not quite sure what to make of this message???

This code, with this debugger (i.e. same MVS2008 and FORTRAN and C) has worked properly in the past, I believe that I've checked or un-checked some box somewhere in the project settings in MVS2008.

Can someone give me a hint as to where to start looking?

Thanks, Bob

ps - Listed below are all the products that I'm using: (all on PC)

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Microsoft Visual Studio 2008
Version 9.0.21022.8 RTM
Microsoft .NET Framework
Version 3.5 SP1

Installed Edition: Professional

Microsoft Visual Basic 2008   91605-270-7762076-60186
Microsoft Visual Basic 2008

Microsoft Visual C# 2008   91605-270-7762076-60186
Microsoft Visual C# 2008

Microsoft Visual C++ 2008   91605-270-7762076-60186
Microsoft Visual C++ 2008

Microsoft Visual Studio 2008 Tools for Office   91605-270-7762076-60186
Microsoft Visual Studio 2008 Tools for Office

Microsoft Visual Web Developer 2008   91605-270-7762076-60186
Microsoft Visual Web Developer 2008

Crystal Reports    AAJ60-G0MSA4K-68000CF
Crystal Reports Basic for Visual Studio 2008

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB944899)   KB944899
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/944899.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB945282)   KB945282
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/945282.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB946040)   KB946040
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/946040.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB946308)   KB946308
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/946308.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB946344)   KB946344
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/946344.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB946581)   KB946581
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/946581.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB947171)   KB947171
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/947171.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB947173)   KB947173
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/947173.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB947180)   KB947180
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/947180.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB947540)   KB947540
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/947540.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB947789)   KB947789
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/947789.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB948127)   KB948127
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/948127.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB953256)   KB953256
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/953256.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB971091)   KB971091
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/971091.

Hotfix for Microsoft Visual Studio 2008 Professional Edition - ENU (KB973674)   KB973674
This hotfix is for Microsoft Visual Studio 2008 Professional Edition - ENU.
If you later install a more recent service pack, this hotfix will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/973674.

Intel(R) Visual Fortran     Package ID: w_fcompxe_2013.1.119
Intel(R) Visual Fortran Composer XE 2013 Update 1 Integration for Microsoft Visual Studio* 2008, 13.0.3600.2008, Copyright (C) 2002-2012 Intel Corporation
* Other names and brands may be claimed as the property of others.

This product includes software developed at The Apache Software Foundation (http://www.apache.org/).

Portions of this software were originally based on the following:
- software copyright (c) 1999, IBM Corporation., http://www.ibm.com.
- software copyright (c) 1999, Sun Microsystems., http://www.sun.com.
- the W3C consortium (http://www.w3c.org) ,
- the SAX project (http://www.saxproject.org)
- voluntary contributions made by Paul Eng on behalf of the Apache Software Foundation that were originally developed at iClick, Inc., software copyright (c) 1999.

This product includes updcrc macro, Satchell Evaluations and Chuck Forsberg. Copyright (C) 1986 Stephen Satchell.

This product includes software developed by the MX4J project (http://mx4j.sourceforge.net).

This product includes ICU 1.8.1 and later.Copyright (c) 1995-2006 International Business Machines Corporation and others.

Portions copyright (c) 1997-2007 Cypress Semiconductor Corporation. All rights reserved.

This product includes XORP. Copyright (c) 2001-2004 International Computer Science Institute

This product includes software from the book "Linux Device Drivers" by Alessandro Rubini and Jonathan Corbet, published by O'Reilly & Associates.

This product includes hashtab.c. Bob Jenkins, 1996.

Intel® Advisor XE 2013 Update 1  
Intel® Advisor XE 2013 Update 1, (build 251878), Copyright © 2009-2012 Intel Corporation. All rights reserved.

Intel® C++ Composer XE 2013   Package ID: w_ccompxe_2013.1.119
Intel® C++ Composer XE 2013 Update 1 Integration for Microsoft* Visual Studio* 2008, Version 13.0.1194.2008, Copyright © 2002-2012 Intel Corporation
* Other names and brands may be claimed as the property of others

Intel® Inspector XE 2013 Update 2  
Intel® Inspector XE 2013 Update 2, (build 250094), Copyright © 2009-2012 Intel Corporation. All rights reserved.

Intel® Parallel Advisor 2011 Update 3  
Intel® Parallel Advisor 2011 Update 3, (build 186618), Copyright © 2009-2011 Intel Corporation. All rights reserved.

Intel® VTune™ Amplifier XE 2013 Update 2  
Intel® VTune™ Amplifier XE 2013 Update 2, (build 253325), Copyright © 2009-2012 Intel Corporation. All rights reserved.

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

 

4 Beiträge / 0 neu
Letzter Beitrag
Nähere Informationen zur Compiler-Optimierung finden Sie in unserem Optimierungshinweis.
Bild des Benutzers Steve Lionel (Intel)

Have you added the path to the current MKL "redist" folder containing the MKL DLLs to your system PATH environment variable?  As of the 2013 release, that is no longer done automatically by the install. It could be that PATH is pointing to an old version of MKL.

The debug button being grayed out suggests to me that VS thinks the target executable did not build. What do you have under Project > Properties > Debugging > Command, and Project > Properties > Linker> General > Output File?

Steve
Bild des Benutzers rdees

Steve,

Thx for your ideas. I've definitely got some kind of path issue.  I checked the item you listed above.  The target executable file did not build.  In fact, at this point-in-time II cannot even initiate a compile command.  While inside MVS2008 I open one of my fortran source code files, and change one character. When I try to build, it gives me the message that the project is up-to-date.  When I click on the "Build" tab I do not see a "Compile F7" tab at the bottom.  It is as if my FORTRAN compiler isn't there.

My solution consists of 2 projects, one contains all FORTRAN source code, and the other contains all the C code.  The C code project compiles, and builds properly, but, the FORTRAN project always says up-to-date.

I've checked the "Solution Dependancies".  They look okay.  Any ideas what I can check next?  I'm totally baffled.  This all worked fine a couple of days ago.  I must have checked or un-checked some box somewhere in MSV2008. 

Bild des Benutzers rdees

Steve - I got the "No compile" problem fixed.  I found and read your article "Problem: Fortran source files not compiled when building in Visual Studio".  Pressing the reset button fixed it.  Thx.  Now I can work on the path issues.

Melden Sie sich an, um einen Kommentar zu hinterlassen.