Bluetooth

Ein- und Ausschalten der Intel(R) Edison Arduino On-Board-LED über Bluetooth SPP mithilfe des IoT-Devkits

        Einleitung

     Dieser Artikel erklärt, wie Sie das IoT-Entwicklungskit einrichten, Bluetooth SPP aktivieren, die Yocto-Anwendung erstellen, welche die Daten aus dem Puffer der Pipe abruft, die von der BT-DBUS-API verwendet wird, und wie Sie den GPIO zum Ein- und Ausschalten der Intel(R) Edison-LED steuern. Durch das Befolgen der untenstehenden Schritte können Sie die Intel(R) Edison Entwicklungsumgebung für Bluetooth einrichten und die Funktionsweise der Intel(R) Edison-Hardware und -Software nachvollziehen.

  • Yocto-Projekt
  • Internet der Dinge
  • C/C++
  • Fortgeschrittene
  • Intel Edison
  • Bluetooth
  • BT SPP
  • Bluetooth*
  • Entwicklungstools
  • Intel® Atom™ Prozessoren
  • Internet der Dinge
  • Attivare/disattivare Intel(R) Edison Arduino su scheda LED tramite Bluetooth SPP usando IoT dev kit

            Introduzione

         Questo articolo spiega come configurare il kit di sviluppo IoT e attivare Bluetooth SPP e realizzare l’applicazione Yocto che ottiene dati dal buffer del pipe usato dall’API BT-DBUS e controllare il GPIO per accendere/spegnere il LED in Intel(R) Edison. Seguendo la guida passo dopo passo sottostante, è possibile impostare facilmente l’ambiente Intel(R) Edision Developer con Bluetooth e comprendere bene hardware e software Intel(R) Edision.

  • Yocto-Projekt
  • Internet der Dinge
  • C/C++
  • Fortgeschrittene
  • Intel Edison
  • Bluetooth
  • BT SPP
  • Bluetooth*
  • Entwicklungstools
  • Intel® Atom™ Prozessoren
  • Internet der Dinge
  • Turn on/off Intel(R) Edison Arduino on board LED via Bluetooth SPP by using the IoT dev kit

            Introduction

         This article explains how to set up IoT developer kit and enable Bluetooth SPP and make the Yocto application which getting data from buffer of the pipe which used by BT-DBUS API and control the GPIO to turn on / off LED in the Intel(R) Edison. As you do follow the step by step guide below, you may easily have set-up of the Intel(R) Edision Developer environment with Bluetooth as well as can understand well the Intel(R) Edison hardware and software.

  • Yocto-Projekt
  • Internet der Dinge
  • C/C++
  • Fortgeschrittene
  • Intel Edison
  • Bluetooth
  • BT SPP
  • Bluetooth*
  • Entwicklungstools
  • Intel® Atom™ Prozessoren
  • Internet der Dinge
  • 使用安卓* 电话通过英特尔® Edison的蓝牙串行端口 (SPP) 与Arduino代码通信

    简介:

    在 Arduino 环境中,可以非常便捷地访问 BT SPP(比如串行端口),并响应 BT 串行端口 传来的命令字符串。 许多 Arduino 项目均运用这种方法支持项目的远程控制。 以前,您需要 采用额外的 BT shield 或 BT 套件在英特尔® Galileo 上存档。 现在,借助英特尔® Edison 的内置 BT 支持,您可以使用带有 Arduino breakout 开发板的 Edison 模块完成存档。 不再 需要额外的 BT shield。

    System Architecture

    要求:

    • Android* 手机或运行 Android 系统的平板电脑,且带有蓝牙。

    Cómo reproducir audio desde Intel® Edison por Bluetooth* con Advanced Audio Distribution Profile (A2DP)

    Requisitos

    • Un dispositivo de audio con Bluetooth*, como auriculares o altavoces que puedan reproducir sonidos.
    • Conectar la placa Intel® Edison a una red Wi-Fi*, como se indica en el Paso 3: Conectar la placa a internet.
    • SCP que use un host conectado por computadora a la misma red (para copiar archivos de música).
    • Establecer una terminal a la placa mediante puerto serie o SSH.
  • Entwickler
  • Yocto-Projekt
  • Internet der Dinge
  • Bluetooth
  • audio
  • Edison
  • A2DP
  • Advanced Audio Distribution Profile
  • mplayer
  • Internet der Dinge
  • Communicate to Arduino code with your Android* Phone by Bluetooth Serial Port Profile (SPP) on Intel® Edison

    Introduction:

    In Arduino environment, it's convenient to access BT SPP like a serial port and react to the command string sent from the BT serial port. Many Arduino projects have utilized this way to allow remote control for their projects. In the past, you'll need additional BT shield or BT kit to archive it on Intel® Galileo. Now, since we have built-in BT support on Intel® Edison, you can use Edison module with Arduino breakout board to do it. NO additional BT shield is required!

    使用高级音频分发文件 (A2DP) 通过蓝牙* 从英特尔® Edison开发板播放音频

    要求

    • 蓝牙* 音频设备,如能够播放声 音的耳机或扬声器。

    • 将英特尔® Edison 开发板连接 至 Wi-Fi* 网络,请参见: 第 3 步: 将开发板联网

    • SCP 使用连接至相同网络的主机 计算机(对音乐文件进行复制)。

    • 通过 串行端口 或 SSH 在开发板上建立 Terminal。

    设置

    打开蓝牙* 音频设备。

    在开发板的 Terminal 上键入以下内容。

    rfkill unblock 
    
    bluetooth bluetoothctl

    扫描设备。

  • Entwickler
  • Yocto-Projekt
  • Internet der Dinge
  • Bluetooth
  • audio
  • Edison
  • A2DP
  • Advanced Audio Distribution Profile
  • mplayer
  • Internet der Dinge
  • Intel® Edison Bluetooth* Guide

    Abstract

    This document explains how to configure the Bluetooth* software stack on your Intel® Edison board.  It covers the BlueZ* software stack, basic Bluetooth operation, and the setup of various Bluetooth profiles including

  • Entwickler
  • Yocto-Projekt
  • Internet der Dinge
  • Experten
  • Anfänger
  • Fortgeschrittene
  • Bluetooth
  • BLE
  • GATT
  • A2DP
  • HID
  • PAN
  • SPP
  • HOGP
  • HRP
  • TIP
  • FTP
  • BlueZ
  • Edison
  • Intel
  • intelmaker
  • Bluetooth*
  • Internet der Dinge
  • Bluetooth abonnieren