I need to use AMT technology to boot a target computer from ISO exists on another computer (the controller) using CD IDE-R.
this target computer will automatically, do some job and should save its results into a file.
Of course, When using ISO image to boot, any file created into the bootable OS file system drive (with WinPE, usually X drive), is not saved back into the ISO.
I hope, I am asking in the correct place: My question is regarding Intel AMT v9 technology. I have only one PC which is app 300 KM far from me. To have as good control over it as possible, I have decided to control it using Intel AMT. My configuration uses Intel AMT 9.
I can access the PC without problems through Intel AMT KVM through un-encrypted connection. However, I want to be able to access the PC securely. Here are my questions:
Our goal is to change the initial admin password for the computers from Windows via software deployment / operating system deployment.
I have tried to use this method:
Created a profile with the ACUWizard and used the following syntax to configure the VPro
ACUConfig.exe /Output File C:\windows\debug\intelamtinstalllog.txt ConfigAMT AMTSet1.xml /DecryptionPassword "decryption_password" /AbortOnFailure /AdminPassword "admin"
but I get these errors
I recently upgrade IPT with PKI from v220.127.116.11 to v18.104.22.168, then I can not use CryptImportKey any more.
Because it returns 0x000000b7(maybe ERROR_ALREADY_EXISTS) after PIN setting PTD displayed.
Only container created.
I set dwFlags as CRYPT_USER_PROTECTED to use PKI with PTD.
I did not change any source codes, but only changed provider from Intel IPT Enhanced Cryptographic Provider to Intel IPT CSP - Non-Exportable Keys.
What is wrong with it? or any misuse?
I am having issues provisioning a workstation with Windows 7 Pro x64 with vPro v9 via LabTech. I have tried uninstalling and re-installing MEI as well as installing the needed driver updates to the computer but none of these made any difference. I have attached the screen shot of the full error to this topic. Any help would be greatly appreciated. Thanks in advance.
I am using a Lenovo ThinkPad T420 and Windows 7 prof. x64 as my main workstation. Yesterday I did a reinstallation of Windows 7 (ISO image from MSDNAA and not the Lenovo DVD). After the OS and all drivers (using Lenovo System Update) were installed, I had a look at the device manager and recognized the "Intel management engine interface". Since I don't need this function I researched how this device can be disabled. First I had a look in the System BIOS which stated that AMT is disabled:
Thank you for your interest in the Intel® Active Management Technology (Intel® AMT) High-level API Technology.
Introduction to the High-level API Intel Management Library Technology
Intel® Active Management Technology (Intel® AMT) is a capability embedded in Intel-based platforms (in an Intel AMT device). Intel AMT enables remote access to platforms even when the operating system is not available or the platform is turned off. The only requirement is that the platform must be connected to a power supply and a network.
Thank you for your interest in the Intel® Active Management Technology (Intel® AMT) Software Development Kit. The Intel® AMT SDK (Software Development Kit) contains the building blocks and documentation material needed to develop software that interacts with Intel® AMT systems.