I've compiled and configured HPL to run in a system with Xeon Phi but I have a problem with the linpack run.
I've copied HPL.dat and xhpl under /tmp of mic0, set the I_MPI_MIC enabled and /sbin/sysctl -w net.ipv4.ip_forward=1
Then I've run the following command:
HOST# mpirun -hosts mic0 -n 114 -wdir /tmp ./xhpl
I opened a top on the MIC card and actually the run stared, but after a minute I got the following message:
Connection to mic0 closed by remote host.
APPLICATION TERMINATED WITH THE EXIT STRING: Killed (signal 9)
after that HPL stopped and all the terminals opened on mic0 were closed.
Do you have any suggestion about it?
Thanks as always for your help!