Quick Start CE4100

Quick Start CE4100

Hi, I bought Intel Media Processor CE4100 Development Platform (Connected A/V).First StepGet Intel Media Processor CE4100 Development Platform (Connected A/V),Videonhttps://www.videon-central.com/videon-store/ce4100cavADI Engineeringhttp://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=25&product_id=94Second StepConnect CE4100 Development Platform by serial cable.For example, the serial of ADI Engineering's borad

  • Baud rate 115200
  • Data bits 8
  • Parity none
  • Stop bits 1
  • Flow Control none

And check the version of Linux.
# more /proc/versionLinux version 2.6.23 (root@versioncontrol) (gcc version 4.1.2) #1 PREEMPT Thu May 6 14:47:57 EDT 2010Check hostname.# hostnameintel_ce_linuxCheck IP address# ifconfigeth0 Link encap:Ethernet HWaddr 00:80:3F:0D:A1:03 inet addr: Bcast: Mask: inet6 addr: fe80::280:3fff:fe0d:a103/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12682 errors:0 dropped:0 overruns:0 frame:0 TX packets:4896 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:12604581 (12.0 MiB) TX bytes:314753 (307.3 KiB) Memory:df860000-df880000lo Link encap:Local Loopback inet addr: Mask: inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:48 errors:0 dropped:0 overruns:0 frame:0 TX packets:48 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3648 (3.5 KiB) TX bytes:3648 (3.5 KiB)Third StepBuild develop enviroment.....Where can we get the enviroment of cross compiler and SDK ?We prepared host computer and target device(CE4100 Development Platform) ?Anybody make the image of Linux for cross compile of CE4100?Fourth StepCreate simple program such as "Hello CE4100".....Five StepBuild Apache and transfer it to CE4100 Development Platform.....I make the document of begginer!Thank youAkira

4 posts / 0 new
Last post
For more complete information about compiler optimizations, see our Optimization Notice.

Thank you Akira,

this level of information is truly much appreciated - great detail and input.

I would like to make everybody aware that if your development platform has JTAG enabled (an eXtended Debug Port on the board), the Intel JTAG Debugger included in the Intel Embeddeed Software Development Tool Suite 2.2 Update 1 for Intel Atom processor does now wupport Macraigor usb2Demon (http://www.macraigor.com) for development and system level debug targeting Intel Atom processor C4xxx based deisgns.

Thanks again Akira for your posting,


Hi Akira,

Thanks for putting this up. We are trying to build SDK on linux. It wont build. When we tried building with make defconfig settings, we get "No rule to build 'kernel' required by platform_config'.

Indeed you do not find 'kernel' package under package folder.

Anybody out there who were able to successfully build it?

Note: We have tried FC6 to FC 14 to get this working without any luck.

Best regards,

Hi Akira, thanks for sharing. I want to start an Apache server on CE4100. Do you have the guide/document for cross compile Apache to CE4100? And how to configure it after make and install? thx.

Leave a Comment

Please sign in to add a comment. Not a member? Join today