[0:]: errno=Connection timed out[0:]: errno=Connection timed out


When I build the Galileo IoT image following the link, I am facing the below error:


ERROR: Fetcher failure: Fetch command failed with exit code 128, output:
Cloning into bare repository '/home/swathi/internet_of_things/iotdk_src_140220/meta-intel-iot-devkit/build/downloads/git2/'...

fatal: unable to connect to[0:]: errno=Connection timed out[1:]: errno=Connection timed out[2:]: errno=Connection timed out[3: 2001:4f8:1:10:0:1991:8:25]: errno=Network is unreachable

ERROR: Function failed: Fetcher failure for URL: 'git://;branch=linux-3.8.y'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /home/swathi/internet_of_things/iotdk_src_140220/meta-intel-iot-devkit/build/tmp/work/clanton-poky-linux/linux-yocto-clanton/3.8-r0/temp/log.do_fetch.9322
ERROR: Task 348 (/home/swathi/internet_of_things/iotdk_src_140220/meta-intel-iot-devkit/meta-clanton-bsp/recipes-kernel/linux/, do_fetch) failed with exit code '1'


During the initial setup, the command "git clone git://" failed. After I replaced it with command "git clone", I was able to do a successful git clone.

Is there a way I can make use of "http" instead of "git" to download the sources? Or is there any other procedure to setup build environment for Galileo board?



3 posts / 0 new
Last post
For more complete information about compiler optimizations, see our Optimization Notice.
Best Reply

The 'git' protocol is just one of many ways you might clone a Git repository. If HTTP works, but the git protocol doesn't, there is certainly nothing wrong with using HTTP. You wind up with the same clone either way.

The document you linked probably needs to be updated.

Alternatively, you could connect to an open (wifi) access point, and download using git protocol. Proxy seems to be the potential blocker.

Leave a Comment

Please sign in to add a comment. Not a member? Join today