Setting MSR 0x1AD (turbo ratio limits) has no effect on Sandy Bridge

Setting MSR 0x1AD (turbo ratio limits) has no effect on Sandy Bridge

Setting MSR 0x1AD in windows does not change the maximum turbo ratio limit as
says it should, even if MSR_PLATFORM_INFO bit 28 is high. The processor
does not even respond to lowering the turbo ratio limit. This has
proven true numerous times on multiple Sandy Bridge based systems, including PCH P67 systems.

seems that the CPU is not bothering to read the MSR and set itself to
the new value. Does anyone have an idea on what must be done to force
the CPU to change its maximum turbo ratio limit while the system is in
Windows or another OS?

Here are some things I have tried:

I have set the turbo ratio limit MSR, then rebooted, but the register
would get reset. I have set the MSR, put computer to sleep, and
resumed, but the register would be reset. I have booted with turbo
disabled, set the MSR, then enabled turbo, but there was no change in
the turbo limit.

5 posts / 0 new
Last post
For more complete information about compiler optimizations, see our Optimization Notice.

Hello khenglish,
I'm sorry but I didn'tnoticethis question until today.
Is this still something you are interested in?
If so, I will have to check on this with other people.
Is (MSR 0xce) msr_platform_info[bit 28] == 0 after booting? If so, you can't change msr_turbo_ratio_limit (MSR 0x1ad)
Afteryou write to MSR 0x1ad, if you readthe MSRback, do you get the new value?

MSR 0x1AD can be changed and keeps the new values. i.e. on an unlocked processor with EAX=0x28282828 from BIOS post, changing this to 0x26262626 and being able to read that set value from 0x1AD still results in turbo up to 40 and not 38 as set.

Happy New Year. :)

Thanks terabytes,
Does your system show (MSR 0xce) msr_platform_info[bit 28] == 0 after booting?
And... just checking... after booting the multiplier is 40 and, when you change the multiplier to 38, the max turbo frequency still shows up as 4.0 GHz (40 * 100 MHz) on SNB?
If so, how do you measure the frequency?

No, Programmable Ratio Limit for Turbo Mode bit 28 of MSR 0xce is 1

Yes. I usually use my own software using MSR performance counters to measure turbo ratio / frequency but other 3rd party softwares give the same results and of course values are reflected in MSR 0x198 as well.

Here is an example with 3rd party SW HWinfo32. BIOS turbo settings were 0x2e2f3032 for 0x1AD then the MSR changed in the OS to 0x26272829. You can see the new setting reported by HWinfo32 as max turbo 41 but when running a single thread turbo still boosts to 50. BCLK is set to 100.00MHz

Leave a Comment

Please sign in to add a comment. Not a member? Join today