Managability Commander v7.0.11340.2 Remote KVM Redirection Port - Not working

Managability Commander v7.0.11340.2 Remote KVM Redirection Port - Not working

I have been using theManagability Commander v7.0.11340.2 with the built-in Remote KVM to the Redirection Port, and it is not working.It works to the Standard Port.The RealVNC Client works as well.I believe that the Intel software is attempting to communicate with the wrong port on the client. I believe there was a port number change between AMT versions and this isn't working with the new version. I had similar issues with the prior release as well.Is there somewhere I can verify this?

9 posts / 0 new
Last post
For more complete information about compiler optimizations, see our Optimization Notice.

I have noticed some issues with the ports as well. I seem to have to tell it to enable both - the standard port and the redirection port and then it seems to work. I will forward your question on to the dev team.

Follow me on Twitter: @GaelHof
Facebook: https://www.facebook.com/GaelHof

I have both enabled. The Standard port works. Redirection port does not.I have a capture file, if that helps. However, the problem is easy to reproduce.

Yes, any thing you can send us that would help our dev team root cause this would be great!

Follow me on Twitter: @GaelHof
Facebook: https://www.facebook.com/GaelHof

Hi GH,
I also met this similar problem when testing AMT_TC037 by munual and it can pass with older v6.0.10314.2.
Fail symptom:Click the KVM viewer Redirect Port, the screen will has no response. Refer to attached picture.

Attachments: 

AttachmentSize
Download TC037.jpg343.18 KB

Hi - I think this is now a known issue. We will need the DTK engineering team to take a look at this. I apologize for the delay.

Follow me on Twitter: @GaelHof
Facebook: https://www.facebook.com/GaelHof

We just posted a new version of the DTK onto the community - maybe you can check it out.http://software.intel.com/en-us/articles/download-the-latest-version-of-manageability-developer-tool-kit/

Follow me on Twitter: @GaelHof
Facebook: https://www.facebook.com/GaelHof

Hi,GH.
I have same issues.....

I try install DTK V.7.0.12102.2 on WindowsXP and Windows7.

Windows XP can use Redirection Port

but Windows7 can not....

Hello - I just tested with Windows 7 on my system and saw that the window comes up but tries to connect forever. We should have this fixed soon - meanwhile, I hope you are OK using the Standard Port.

Follow me on Twitter: @GaelHof
Facebook: https://www.facebook.com/GaelHof

Leave a Comment

Please sign in to add a comment. Not a member? Join today