Unable to control remote machine via serial over LAN

Unable to control remote machine via serial over LAN

Hi,
Am using HP VproDC7700 machines , in one machine i installed Management development toolkit & running as provision server and other as client (HP DC7700) , am able to control all remote commands like remote reboot via BIOS , rempte power off , down etc., for client from provisioning server

but when am opeining serial over LAN display is showing at boot timeand after that itsnt displaying nothing on terminal

2 posts / 0 new
Last post
For more complete information about compiler optimizations, see our Optimization Notice.

Quoting - sandeep_manchala
Hi,
Am using HP VproDC7700 machines , in one machine i installed Management development toolkit & running as provision server and other as client (HP DC7700) , am able to control all remote commands like remote reboot via BIOS , rempte power off , down etc., for client from provisioning server

but when am opeining serial over LAN display is showing at boot timeand after that itsnt displaying nothing on terminal

Could you describe how you provisioned the system in a little bit more detail? It sounds like you're provisioning in Enterprise mode instead of SMB mode, and if that's the case there is the possibility that SOL and IDE-R are disabled.

Are you using the DTK (managability Development toolkit)to run the remote commands you mentioned? From the Remote Control tab when you click the Take Control button I mean. If that is how you're running the commands, do all of the options under Remote Control show up as enabled?

Leave a Comment

Please sign in to add a comment. Not a member? Join today