forrtl: severe (174): SIGSEGV, segmentation fault occurred

forrtl: severe (174): SIGSEGV, segmentation fault occurred

Hi,

I have been using MKL non-symmetric solver for my finite element code (up to MKL Version10), but have a probelm with updated version of MKL when  call  pardiso_unsym  ( reordering):

      phase = 11 ! only reordering and symbolic factorization
      CALL pardiso (pt, maxfct, mnum, mtype, phase, n, a, ia, ja,
     1 idum, nrhs, iparm, msglvl, ddum, ddum, error)

Errors:

forrtl: severe (174): SIGSEGV, segmentation fault occurred
Image              PC                Routine            Line        Source
libpthread.so.0    00002AAAAC8B754B  Unknown               Unknown  Unknown

Stack trace terminated abnormally.

------

The compiler link I used are:

Currently Loaded Modulefiles:
  1) Barrine/2.0                     2) mpt/2.00                        3) intel-cmkl-11/12.12.1.2.8.273   4) intel-fc-11/12.1.2.8.273

COM = ifort -m64  -w -fpp -I/sw/sdev/intel/ComposerXE/composer_xe_2011_sp1.8.273/mkl/include

LIBS =  -L"/sw/sdev/intel/ComposerXE/composer_xe_2011_sp1.8.273/mkl/lib/intel64" -lmkl_intel_lp64 \
        -lmkl_intel_thread \
        -lmkl_core \
        -liomp5 -lpthread -lm

 In addtion, my code works well with the SuperLU, but not with MKL Pardiso at the moment. Any advices to fix it? Thanks in advance

7 posts / 0 new
Last post
For more complete information about compiler optimizations, see our Optimization Notice.
Alexander Kalinkin (Intel)'s picture

Hi Henry,

Could you provide testcase or matrix elements with iparm array to reproduce issue on our side? It could help us to investigate it

With best regards,

Alexander Kalinkin

Did you follow a checklist such as

http://software.intel.com/en-us/articles/tips-for-debugging-run-time-fai...

to track this down?  No doubt, you're aware that the most common situation is a requirement to increase stack limit or try heap-arrays option.

 

Thanks Alexander and Tim.

I had a probelm to post it here and thus I emailed you directly this Monday. I used to check the code up to item 5) as listed by Tim.

My probelm is not solved yet and thus I attached the matrix element and solver code (iparm) below. Look forward to your further advice.

Thanks

Henry 

Attachments: 

Alexander Kalinkin (Intel)'s picture

Hi,

I've turn on matrix checker on your matrix (iparm(27)=1) and got next problem:

*** Error in PARDISO (incorrect input matrix ) error_num= 24
*** Input check: j=4908159, ja(j)=35835, ja(j+1)=35830 are incompatible
The following ERROR was detected: -1

Looks like your ja array is incorrect.

With best regards,

Alexander Kalinkin

did you check the input consistency with matrix checker option? iparm(27) =1

Thanks. My probelm is solved after reordering JA.

Login to leave a comment.