1440x900 resolution on 945GM (GMA 950)

180 posts / 0 new
Last post
For more complete information about compiler optimizations, see our Optimization Notice.

Hello Arch,

I went to the registry editor and found a ton of dtd files. I do not know what to put in there. Also where can I go to get the .inf file to change it to maybe allow the 1440x900 resolution?

Dear All,

It appers I have the same problem as discussed here before.

Please send me the right DTD to get1920x1200 working with vaio tz31 (having Mobile Intel 945GM/GU Express Chipset Family) with philips monitor and some link to how-to for changing it.

Thanks for help.

Monitor
Windows description......... Generic PnP Monitor
Manufacturer description.... Philips 230W5
Manufacturer................ Philips

Plug and Play ID............ PHL0825
Serial number............... VN 005327
EDID data source............ Registry (stored)

Manufacture date............ 2005, ISO week 41
EDID revision............... 1.3
Display type and signal..... Analog 0.700,0.300 (1.0V p-p)
Sync input support.......... Separate, Composite, Sync on green
Screen size................. 500 x 310 mm (~25")
Power management............ Standby, Suspend, Active off/sleep

Color characteristics
Display gamma............... 2,20
Red chromaticity............ Rx 0,640 - Ry 0,332
Green chromaticity.......... Gx 0,288 - Gy 0,601
Blue chromaticity........... Bx 0,146 - By 0,065
White point (default)....... Wx 0,313 - Wy 0,329

Timing characteristics
VESA GTF support............ Not supported
Horizontal scan range....... 30-94kHz
Vertical scan range......... 56-85Hz
Video bandwidth............. 200MHz
Extension blocks............ n/a
Timing recommendation #1.... 1920x1200 at 60Hz
Modeline................ "1920x1200" 193,250 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync

Standard timings supported
640 x 480 at 60Hz - IBM VGA
640 x 480 at 67Hz - Mac II
640 x 480 at 72Hz - VESA
640 x 480 at 75Hz - VESA
720 x 400 at 70Hz - IBM VGA
800 x 600 at 56Hz - VESA
800 x 600 at 60Hz - VESA
800 x 600 at 72Hz - VESA
800 x 600 at 75Hz - VESA
832 x 624 at 75Hz - Mac II
1024 x 768 at 60Hz - VESA
1024 x 768 at 70Hz - VESA
1024 x 768 at 75Hz - VESA
1024 x 768 at 85Hz - VESA
1152 x 870 at 75Hz - Mac II
1280 x 960 at 60Hz - VESA
1280 x 1024 at 60Hz - VESA
1280 x 1024 at 75Hz - VESA
1280 x 1024 at 85Hz - VESA
1600 x 1200 at 60Hz - VESA
1600 x 1200 at 75Hz - VESA
1920 x 1080 at 60Hz - VESA
1920 x 1200 at 60Hz - Philips

Raw EDID base
00: 00 FF FF FF FF FF FF 00 41 0C 25 08 CF 14 00 00
10: 29 0F 01 03 1F 32 1F 78 EA CF B5 A3 55 49 99 25
20: 10 50 54 BF EF 80 81 40 81 80 A9 40 A9 4F D1 C0
30: 61 59 81 99 01 01 7D 4B 80 A0 72 B0 2D 40 88 C8
40: 36 00 EF 36 11 00 00 1C 00 00 00 FD 00 38 55 1E
50: 5E 14 00 0A 20 20 20 20 20 20 00 00 00 FC 00 50
60: 68 69 6C
69 70 73 20 32 33 30 57 35 00 00 00 FF
70: 00 20 56 4E 20 20 30 30 35 33 32 37 0A 20 00 85

Display adapter
Adapter description......... Mobile Intel 945GM/GU Express Chipset Family
Adapter device ID........... 0x27A28086
Display settings............ 1600x1200, 32bpp

User/computer information
Registered user name........ radko
Registered organization..... n/a
Network user name........... radko
Network computer name....... RADKO-VAIO
Windows version ............ Windows 2000
Windows build .............. 6.00.6000
Installation date .......... 29. 5. 2008 12:00:00

Dear Arch,

Since DTDCalc doesn't run under Win2000, I modified the registry myself. I've set TotalDTDCount = 1 and altered the first line with the the data you've provided. The max resolution now is 1280 x 1024 and every time I ty to get it higher my screen goes into powersafe mode.

I didn't mention earlier that the Dell D420 is connected to the E248WFP via a Dell docking station and e DVI-cable (the D420 only has VGA).

Can you help me out?

Peter

peet111174,

Did you change all the DTD_1 entries and TotalDTDCount entries? There are like 12 of them.

Haven't seen anyone try this in Win2K, so don't know how that affects things, either.

Another possibility is that the BIOS is refusing 1920x1200... try 1918x1200

28 3C7E A2 70 B0 23 40 30 2036 00 06 44 21 00 00 1A 37 01

abw11,

Really need the EDID to help you. Can you get it from another PC with that monitor hooked up, or at least get the monitor model number so we can Google it and hopfully find a Linux Modeline to help?

Something I've yet to understand, who sets the registry values for the EDID and DTDs?

Is it the graphics adapter after recieving it from the monitor evertime the computer is turned on?

or is it set when the monitor drivers are installed?

Thanks

radkovanko,

Try

7D 4B 80 A0 72 B0 2D 40 88 C8 36 00 EF 36 11 00 00 1C

using either
http://software.intel.com/en-us/forums//topic/56423

or

http://softwarecommunity.intel.com/Wiki/Graphics/239.htm

My biggest concern is that your monitor is asking for a pixel clock of 193.25MHz, and I'm not sure the 945GM can do more than 150MHz.

where is the information button for intel graphics tray?

here's mine

http://img152.imageshack.us/img152/7855/whereiszb2.jpg

Hello Arch & MADapbrezen

Here is the Raw edid:
00FFFFFFFFFFFF0004720C00440A40810E12010308291A78EAD7A5A2594A9624145054BFEF909500950F81808140714F0101010101019A29A0D051842230509836009A001100001C000000FF004C41543043303531343031360A000000FD00324B1E520E000A202020202020000000FC0058313933570A202020202020200081

Sorry about that, here is the full moninfo:

Monitor
Windows description......... Plug and Play Monitor
Manufacturer description.... X193W
Manufacturer................ ACR

Plug and Play ID............ ACR000C
Serial number............... LAT0C0514016
EDID data source............ Registry (stored)

Manufacture date............ 2008, ISO week 14
EDID revision............... 1.3
Display type and signal..... Analog 0.700,0.300 (1.0V p-p)
Sync input support.......... Separate
Screen size................. 410 x 260 mm (~20")
Power management............ Standby, Suspend, Active off/sleep

Color characteristics
Display gamma............... 2.20
Red chromaticity............ Rx 0.636 - Ry 0.349
Green chromaticity.......... Gx 0.290 - Gy 0.589
Blue chromaticity........... Bx 0.143 - By 0.080
White point (default)....... Wx 0.313 - Wy 0.329

Timing characteristics
VESA GTF support............ Not supported
Horizontal scan range....... 30-82kHz
Vertical scan range......... 50-75Hz
Video bandwidth............. 140MHz
Extension blocks............ n/a
Timing recommendation #1.... 1440x900 at 60Hz
Modeline................ "1440x900" 106.500 1440 1520 1672 1904 900 903 909 934 -hsync +vsync

Standard timings supported
640 x 480 at 60Hz - IBM VGA
640 x 480 at 67Hz - Mac II
640 x 480 at 72Hz - VESA
640 x 480 at 75Hz - VESA
720 x 400 at 70Hz - IBM VGA
800 x 600 at 56Hz - VESA
800 x 600 at 60Hz - VESA
800 x 600 at 72Hz - VESA
800 x 600 at 75Hz - VESA
832 x 624 at 75Hz - Mac II
1024 x 768 at 60Hz - VESA
1024 x 768 at 70Hz - VESA
1024 x 768 at 75Hz - VESA
1024 x 768 at 85Hz - VESA
1152 x 864 at 75Hz - VESA
1152 x 870 at 75Hz - Mac II
1280 x 960 at 60Hz - VESA
1280 x 1024 at 60Hz - VESA
1280 x 1024 at 75Hz - VESA
1440 x 900 at 60Hz - ACR
1440 x 1440 at 60Hz - VESA
1440 x 1440 at 75Hz - VESA

Raw EDID base
00: 00 FF FF FF FF FF FF 00 04 72 0C 00 44 0A 40 81
10: 0E 12 01 03 08 29 1A 78 EA D7 A5 A2 59 4A 96 24
20: 14 50 54 BF EF 90 95 00 95 0F 81 80 81 40 71 4F
30: 01 01 01 01 01 01 9A 29 A0 D0 51 84 22 30 50 98
40: 36 00 9A 00 11 00 00 1C 00 00 00 FF 00 4C 41 54
50: 30 43 30 35 31 34 30 31 36 0A 00 00 00 FD 00 32
60: 4B 1E 52 0E 00 0A 20 20 20 20 20 20 00 00 00 FC
70: 00 58 31 39 33 57 0A 20 20 20 20 20 20 20 00 81

Display adapter
Adapter description......... Intel 82810E Graphics Controller
&nb
sp; Adapter device ID........... 0x71258086
Display settings............ 1152x864, 24bpp

The above Display adapter is from an old
comp. This is not the adapter I want to use it on, I want
to use it on the Intel 945GM

nuovomx,

You're right, I'm not seeing it. Which drivers are you running? It wasn't present in some older drivers, in which case you'll kind of have to trust MonInfo.

abw11,

You'll want to use

9A 29 A0 D0 51 84 22 30 50 9836 00 9A 00 11 00 00 1C

Sorry that the 945GMisn't reading your EDID properly, but luckily you can force it with the DTD trick using the value above.

Sorry, I know I am a total idiot. How do I use this? I download the drivers and save them, I look for the .inf file and can not find that thing that arch says to search for?

Also where should I place this: 9A 29 A0 D0 51 84 22 30 50 9836 00 9A 00 11 00 00 1C

Sorry for all the questions, but I am really lost.

Extract the drivers to a folder.

Look in that folder for the subfolder Graphics, and in there for igdlh.inf.

Modify the line which contains "TotalDTDCount" to have a value of 1 instead of 0.

Modify the line which contains "DTD_1" to contain the string of hex digits I gave you, comma delimited, and add a ",37, 01" to the end.

Go back up to the original folder and double click setup.exe to install the drivers.

Once the drivers are installed, you should reboot and see the new resolution. If not, there are several things to check, but that's a good start.

Ok, I did all of that, now for some reason, when I go to run the setup. It gives me an error saying that it can not install. It starts to extract a .exe. (the first one) and then stops

It says:

copying file: igxpun.exe

Then the error says file copying was not successful.

I'm not even going to try to debug whatever's going wrong there. :(

Your best bet, then, if the basic install is not working, is to just use regedit from the command line.Once it's open, click on the root of the registry and do a Find on "DTD_1". Change it to the numbers I gave above (not comma delimited, this time, but ensure you still include 37 01 at the end), and then hit "Find Next" and do it again for all versions of DTD_1 in the registry.

Repeat for all instances of TotalDTDCount, changing everything in the registry with that name to "1".

Thank You so much MAD.

I did what you said and it worked. Thanks for the patience and thorough explanations.

Very glad it worked for you, abw11. I know it can be a struggle, but sometimes it's worth it.

This problem is driving me crazy!

We got in about 20 Acer x173w monitors and hooked them up to our machines. Half of them that we hooked up to the HP DC5700 machines worked out of the box. The other half wouldn't show 1440x900 as an option. Sometimes installing the most recent driver worked, other times it didn't.

Searching for a answer to this problem I came across this forum two weeks ago, read the wiki on how to do it as well as all 6 pages of this post. Someone else had posted the DTD for the x173w so I modified the inf file and installed it and lo and behold it worked.

A few days ago I found another DC5700 that had this issue, but after I installed the drive under a local admin account and then installed the modified driver. I left after the install was done and the user called me up the next day saying it still didn't give her the option of 1440x900. I thought this might have to do with the fact that she logged in as a user and not a admin so I put it on my "To Do" list and haven't gone up there to work on it yet.

Skip forward to today. I put my laptop into my docking station (a nc6400 with the same graphics chip as the DC5700, the dreaded GM945) and I no longer have 1440x900 while running in "Dual Monitor" mode for my desktop. The odd thing is my LCD on the laptop runs at 1440x900 and is fine, just the Acer x173w doesn't work.

So I downloaded the newest driver since the laptop is Windows Vista and the Desktop is XP(modified June 20 somthing) and made the same modifications, reboot and I still don't have 1440x900. I have posted exerts from my INI files below.

Windows XP Driver

[NonEDIDMode_AddSwSettings]

HKR,, TotalDTDCount, %REG_DWORD%, 1 ; This shows number of DTDs to be used. ; 0-->Disable the feature.

;Following keys have 20 bytes (18 byte DTD + 2 Byte flags).

HKR,, DTD_1,%REG_BINARY%, 01,1D,80,18,71,1C,16,20,58,2C,1A,00,00,00,00,00,00,86,37,01 ;1920x1080@60...Interlaced

HKR,, DTD_2, %REG_BINARY%, 01,1D,80,D0,72,1C,16,20,10,2C,1A,80,00,00,00,00,00,86,37, 01 ;1920x1080@50...Interlaced

HKR,, DTD_3,%REG_BINARY%, 01,1D,00,BC,52,D0,1E,20,B8,28,25,40,00,00,00,00,00,04,37, 01 ;1280x720@50....Non-interlaced

HKR,, DTD_4, %REG_BINARY%, 01,1D,00,72,51,D0,1E,20,6E,28,25,00,00,00,00,00,00,06,37,01 ;1280x720@60....Non-interlaced

HKR,, DTD_5,%REG_BINARY%, 00, 00, 00 ,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00 ;Fifth DTD

HKR,, DTD_6,%REG_BINARY%, 9A,29,A0,D0,51,84,22,30,50,98,36,00,98,FF,10,00,00,1C,37,01 ;1440x900

Windows Vista Driver

[NonEDIDMode_AddSwSettings]

HKR,, TotalDTDCount, %REG_DWORD%, 1 ; This shows number of DTDs to be used. ; 0-->Disable the feature.

;Following keys have 20 bytes (18 byte DTD + 2 Byte flags).

HKR,, DTD_1,%REG_BINARY%, 01,1D,80,18,71,1C,16,20,58,2C,1A,00,00,00,00,00,00,86,37,01 ;1920x1080@60...Interlaced

HKR,, DTD_2, %REG_BINARY%, 01,1D,80,D0,72,1C,16,20,10,2C,1A,80,00,00,00,00,00,86,37, 01 ;1920x1080@50...Interlaced

HKR,, DTD_3,%REG_BINARY%, 01,1D,00,BC,52,D0,1E,20,B8,28,25,40,00,00,00,00,00,04,37, 01 ;1280x720@50....Non-interlaced

HKR,, DTD_4, %REG_BINARY%, 01,1D,00,72,51,D0,1E,20,6E,28,25,00,00,00,00,00,00,06,37,01 ;1280x720@60....Non-interlaced

HKR,, DTD_5,%REG_BINARY%, 00, 00, 00 ,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00, 00,00, 00 ;Fifth DTD

HKR,, DTD_6,%REG
_BINARY%, 9A,29,A0,D0,51,84,22,30,50,98,36,00,98,FF,10,00,00,1C,37,01 ;1440x900

One of my techs here also has a HP laptop (HP Pavilion dv6000) and he had the same issue but he had a different graphics chipset. He found a monitor driver for the Acer and installed it and now his works fine.

I tried doing the same and I still have the same issue.

Any insight on what could be causing this?

Dear all,

thanks so much for sharing all this information. It was interesting, unfortunately hasn't been enough for me to solve my problem yet. I have a Samsung 920NW plugged on my Dell laptop (with a 945GM).

I tried a lot of different things, starting with Moninfo (but no EDID info available). Then I tried PowerStrip, but I can't access the "Advanced Timing options" window for my second display. I also tried the driver specially created by Intel to solve this problem. Then I manually tried various DTDs found on this forum, either through the ini file of the driver, either directly in the registry.

None of these worked... Did anyone manage to get the Samsung 920NW run in 1440*900? Or have another idea?

Thanks so much,

ghilus

I'm having a similar problem. I'm using a toshiba A100 satellite and I'm trying to run dual monitor with a Viewsonic 19" display monitor. I know I need a 1440x900 resolution, and strangely enough it allowed me to do this one time, and one time only.

I tried all of the options I personally knew (BIOS update, driver updates, even tried making a custom .INF) and I was wondering if I could get a hand. Thank you!

Monitor
Manufacturer............. Seiko-Epson
Plug and Play ID......... SEC3633
Data string.............. SAMSUNG LTN154X3-L06
Serial number............ n/a
Manufacture date......... 2005, ISO week 0
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 330 x 210 mm (15.4")
Power management......... Not supported
Extension blocs.......... None
-------------------------
DDC/CI................... Not supported

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.580 - Ry 0.340
Green chromaticity....... Gx 0.310 - Gy 0.550
Blue chromaticity........ Bx 0.155 - By 0.155
White point (default).... Wx 0.313 - Wy 0.329
Additional descriptors... None

Timing characteristics
Range limits............. Not available
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1280x800p at 60Hz (16:10)
Modeline............... "1280x800" 68.940 1280 1296 1344 1408 800 801 804 816 -hsync -vsync

Standard timings supported

Report information
Date generated........... 18/10/2008
Software revision........ 2.1.0.725
Raw data................. 00FFFFFFFFFFFF004CA3333600000000000F0103802115780A87F594574F8C27
......................... 27505400000001010101010101010101010101010101EE1A0080502010301030
......................... 13004BCF100000190000000F0000000000000000002387026402000000FE0053
......................... 414D53554E470A2020202020000000FE004C544E31353458332D4C30360A0070

I'm on a 945G system and I don't personally have this problem.

First, have you unchecked "Hide modes this monitor cannot display" under Properties | Settings | Advanced | Monitor? I know, it's a dumb one, but I have to ask.

Second, uninstall Powerstrip. If you want to reinstall it later, that's fine, but it can interfere.

Third, make sure you're not trying to display on both monitors at once in "Clone" mode-- you will be limited by the resolution and refresh of the less capable monitor.

Fourth, you're not getting an EDID off the monitor you're trying to work with. That should be our first step. Try enabling it as the "Single Display" in the Intel Graphics Tray, then see if you can get an EDID using the usual methods (Information button, Save to Disk).

Fifth, even if you do get an EDID, it's possible the laptop BIOS has been set up to refuse that particular resolution. Use the .inf hacking method to specify 1438x900, which would not be affected.

There's other stuff to try, but let's do that first.

Quoting - salicylik

I'm having a similar problem. I'm using a toshiba A100 satellite and I'm trying to run dual monitor with a Viewsonic 19" display monitor. I know I need a 1440x900 resolution, and strangely enough it allowed me to do this one time, and one time only.

I tried all of the options I personally knew (BIOS update, driver updates, even tried making a custom .INF) and I was wondering if I could get a hand. Thank you!

Monitor
Manufacturer............. Seiko-Epson
Plug and Play ID......... SEC3633
Data string.............. SAMSUNG LTN154X3-L06
Serial number............ n/a
Manufacture date......... 2005, ISO week 0
-------------------------
EDID revision............ 1.3
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 330 x 210 mm (15.4")
Power management......... Not supported
Extension blocs.......... None
-------------------------
DDC/CI................... Not supported

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.580 - Ry 0.340
Green chromaticity....... Gx 0.310 - Gy 0.550
Blue chromaticity........ Bx 0.155 - By 0.155
White point (default).... Wx 0.313 - Wy 0.329
Additional descriptors... None

Timing characteristics
Range limits............. Not available
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1280x800p at 60Hz (16:10)
Modeline............... "1280x800" 68.940 1280 1296 1344 1408 800 801 804 816 -hsync -vsync

Standard timings supported

Report information
Date generated........... 18/10/2008
Software revision........ 2.1.0.725
Raw data................. 00FFFFFFFFFFFF004CA3333600000000000F0103802115780A87F594574F8C27
......................... 27505400000001010101010101010101010101010101EE1A0080502010301030
......................... 13004BCF100000190000000F0000000000000000002387026402000000FE0053
......................... 414D53554E470A2020202020000000FE004C544E31353458332D4C30360A0070

That EDID is from the laptop screen, it won't help you. Try the stuff I suggested in the previous post and we'll go from there.

Hello!

I can see this has been asked about a million times before in this thread, but I have the same problem as the person in the beginning: I can't get my Benq FP92Wa monitor to work on the resolution 1440x900.

I have a brand new Intel DG31PR motherboard and I'm using the onboard graphics adapter and Win XP. I've updated the BIOS and downloaded the graphics card latest driver for this motherboard.

The basic problem is that Moninfo won't give me any decent info on my monitor, it just gives four Display IDs all marked as [sample].

I've tried making my own INF file in PowerStrip but I can't get the Windows hardware manager to update the driver, it says it the current driver is already the best.

Please help me, I've completely ran out of ideas :-(

I'd try using the custom resolution tool listed in the sticky at the top of this Forum, specifically using theDTD

AB 22 A0 A0 50 84 1A 30 30 20 36 00 2F BE 10 00 00 18

which works for some 1440x900 monitors.

I am using a LG W1942T which the Native Resolution is at 1440x900 but I could not set it after trying everything.

Mon Info shows:

Monitor
Manufacturer............. LPL
Plug and Play ID......... LPL2A00
Data string.............. LGPhilipsLCD LP154W01-TLAE
Serial number............ n/a
Manufacture date......... 2005, ISO week 0
-------------------------
EDID revision............ 1.2
Input signal type........ Digital
Color bit depth.......... Undefined
Display type............. RGB color
Screen size.............. 330 x 210 mm (15.4 in)
Power management......... Not supported
Extension blocs.......... None
-------------------------
DDC/CI................... Not supported

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.590 - Ry 0.344
Green chromaticity....... Gx 0.323 - Gy 0.534
Blue chromaticity........ Bx 0.156 - By 0.138
White point (default).... Wx 0.313 - Wy 0.328
Additional descriptors... None

Timing characteristics
Range limits............. Not available
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1280x800p at 60Hz
Modeline............... "1280x800" 71.250 1280 1328 1360 1440 800 802 808 823 -hsync -vsync

Standard timings supported

Report information
Date generated........... 12/7/2008
Software revision........ 2.11.0.760
Raw data................. 00,FF,FF,FF,FF,FF,FF,00,32,0C,00,2A,00,00,00,00,00,0F,01,02,80,21,15,78,0A,0F,10,97,58,52,88,28,
......................... 23,50,54,00,00,00,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,01,D5,1B,00,A0,50,20,17,30,30,20,
......................... 26,00,21,15,10,00,00,19,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,FE,00,4C,
......................... 47,50,68,69,6C,69,70,73,4C,43,44,0A,00,00,00,FE,00,4C,50,31,35,34,57,30,31,2D,54,4C,41,45,00,CB

I am curious why it is showing Native/preferred timing.. 1280x800p at 60Hz while the advertised resolution is at 1440x900.

Any help is appreciated, thanks.

Good question. The EDID itself does not offer a timing for 1440x900, only for 1280x800, which is probably why it gets listed as "native"-- it's the only one listed. It's possible your monitor can accept 1440x900-- you'd have to search for a modeline or similar timings information from someone who has gotten it working at 1440x900.

I bought new comp with Intel G45. Special for HD. (with Win.7 :-))

But max. res. for my monitor is 1024x768! :-(

Monitor Samsung LE32T51bx nativ: 1360x768 @60Hz

I tryed few numbers in DTD and write to registry, but no results.

Can somebody help me?

Hello I am tryng to get a dell Monitor to work and have tried a few combos of Intel drivers and Monitor drivers but no joy on getting the native 1600*900 resolution. Could someone help me please? I am a middle weight PC user but not advanced like some of you guys, so please be gentle with me :)

Specs: Fujitsu Lifebook s Series with INtel 945 Express chipset
Monitor : Dell S2009W
Interface: DVI or VGAnot fussyand have tried both

Mon Info

Monitor
Model name............... DELL S2009W
Manufacturer............. Dell
Plug and Play ID......... DELA044
Serial number............ W653J91M070S
Manufacture date......... 2009, ISO week 4
-------------------------
EDID revision............ 1.3
Input signal type........ Analog 0.700,0.300 (1.0V p-p)
Sync input support....... Separate, Composite, Sync-on-green
Display type............. RGB color
Screen size.............. 440 x 250 mm (19.9 in)
Power management......... Standby, Suspend, Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... Supported
MCCS revison............. 2.1
Display technology....... TFT
Controller............... Mstar 0x56
Firmware revision........ 1.1
Firmware flags........... 0x6245CC
Active power on time..... Not supported
Current frequency........ 44.70kHz, 59.90Hz

Color characteristics
Default color space...... sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.640 - Ry 0.330
Green chromaticity....... Gx 0.300 - Gy 0.600
Blue chromaticity........ Bx 0.150 - By 0.060
White point (default).... Wx 0.313 - Wy 0.329
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 30-83kHz
Vertical scan range...... 56-76Hz
Video bandwidth.......... 140MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1600x900p at 60Hz (16:9)
Modeline............... "1600x900" 97.750 1600 1648 1680 1760 900 903 908 926 +hsync -vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 75Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 75Hz - VESA
1024 x 768p at 60Hz - VESA
1024 x 768p at 75Hz - VESA
1280 x 1024p at 75Hz - VESA
1152 x 864p at 75Hz - VESA STD
1280 x 1024p at 60Hz - VESA STD
1600 x 900p at 60Hz - VESA STD

Report information
Date generated........... 12/08/2009
Software revision........ 2.30.0.797
Operating system......... 5.1.2600.2.Service Pack 2

Raw data
00,FF,FF,FF,FF,FF,FF,00,10,AC,44,A0,53,30,37,30,04,13,01,03,0E,2C,19,78,EE,EE,91,A3,54,4C,99,26,
0F,50,54,A5,4B,00,71,4F,81,80,A9,C0,01,01,01,01,01,01,01,01,01,01,2F,26,40,A0,60,84,1A,30,30,20,
35,00,BB,F9,10,00,00,1A,00,00,00,FF,00,57,36,35,33,4A,39,31,4D,30,37,30,53,0A,00,00,00,FC,00,44,
45,4C,4C,20,53,32,30,30,39,57,0A,20,00,00,00,FD,00,38,4C,1E,53,0E,00,0A,20,20,20,20,20,20,00,FB

Pages

Leave a Comment

Please sign in to add a comment. Not a member? Join today