How to configure SNMP TRAPS

How to configure SNMP TRAPS

Hi All,

        I need your help to configure the SNMP traps configure.I am not sure i am posting the right place or not.

I am using intel S2600GZ server board and installed SNMP subagent version snmpsa-5.0.0-14.x86_64.rpm and i am running on the Suse linuux

SUSE Linux Enterprise Server 11 (x86_64)


I am able to install snmpsa rpm successfully.

I would like to received the traps in another windows machine.For that I added below entried in the snmpd.conf file

rwcommunity  public

#trap2sink localhost public

trap2sink xx.xx.xx.xx:162 public

where  xx.xx.xx.xx is trap receiver ip address and 162 is port.

 # turn on agentx master agent support

master agentx

I am not receiving any trap events.

and i am using basebrd5_v1 and basebrd5_v2 mibs for checking.

am i missing any configuration either in snmpd.conf or snmpsa.conf files?

Thanks for your inputs in well advance.






2 posts / 0 new
Last post
For more complete information about compiler optimizations, see our Optimization Notice.


You might try posting this here:

Or, you can send an email to server support from here:

Regards, Hal G

Intel(R) Developer Zone Support
*Other names and brands may be claimed as the property of others.


Leave a Comment

Please sign in to add a comment. Not a member? Join today