PCI "CONFIG DISPLAY"

Change the display settings for a register value.

Syntax

PCI "CONFIG DISPLAY(/SIZE=size | /DISPLAYBITS={ON | OFF} | /NUM_OF_COL=number | /ZERO_COL_IS_ON={LEFT | RIGHT})"

Parameters

/SIZE=size

Defines the display size of the register value. The parameter size can be one of

BYTE

WORD

DWORD

/DISPLAYBITS={ON | OFF}

ON displays the register values as bits-pattern.

OFF displays the register values as hex-numbers.

/NUM_OF_COL=number

Defines the number of columns to be displayed for a register value. The parameter number can be one of 1,4, 8, or 16.

/ZERO_COL_IS_ON={LEFT | RIGHT}

Defines whether column 0 appears on the left or right side.

Description

This command changes the display settings for a register value as specified by the parameters described above.

Optimization Notice: 
For more complete information about compiler optimizations, see our Optimization Notice.