Filters

Responsive Landing Page

Documentation of Intel® RealSense™ SDK

Authored by Da W. (Intel) Last updated on 02/09/2016 - 13:09
Responsive Landing Page

Overview of Intel® RealSense™ SDK

Authored by Da W. (Intel) Last updated on 02/09/2016 - 13:15
Forum topic

whstest

">

Authored by whitehattest w. Last updated on 02/09/2016 - 12:33
Forum topic

Install failure due to 'The older version of Inter(R) Software cannot be removed.'

Intel(R) Parallel Studio XE 2016 Update 1 Cluster Edition for Windows* Setup Wizard ended prematurely because of an error(s).   Windows Installer failed to configure product:

Authored by Luyan Y. Last updated on 02/09/2016 - 12:31
Documentation

Step 1: Assemble your board from Getting Started with the Intel® Edison Board on Linux*

The Intel® Edison module is meant to be used with a breakout board, so you need to secure your Intel® Edison module to your breakout board before you can use it. The steps to do this vary based on the type of breakout board you have. Choose your breakout board below:

Last updated on 02/09/2016 - 13:29
Forum topic

whstest

whstestwhstest

Authored by whitehattest w. Last updated on 02/09/2016 - 13:29
Documentation

Step 4: Connect over Wi-Fi* from Getting Started with the Intel® Edison Board on Linux*

This guide contains steps to set up network access to your Intel® Edison board and obtain an IP address.

Last updated on 02/09/2016 - 13:34
Documentation

Step 3: Set up a serial terminal from Getting Started with the Intel® Edison Board on Linux*

This section contains steps to set up serial communication with your board. Serial communication gives you access to the Yocto-built Linux* operating system running on your board. Once you're connected, you can use Linux commands to change the hostname and password of your board, set up a Wi-Fi* connection, flash your board's firmware, and more.

Last updated on 02/09/2016 - 13:35
Documentation

Step 5: Set up your IDE from Getting Started with the Intel® Edison Board on Linux*

Now that you have set up your Intel® Edison board, you can get started programming your board. You chose your programming language and IDE when you ran the integrated installer. For next steps to get started with your preferred language, choose the appropriate link below:

Last updated on 02/09/2016 - 13:35
For more complete information about compiler optimizations, see our Optimization Notice.