Article

Using Intel® System Studio in a Virtual Machine Environment

Intel® System Studio and many of its components can be used for software development, analysis and debug targeting workloads running inside virtualized guest OSs. In many ways developing for a virtualized environment is only an extension of the concept of cross-development.
Authored by robert-mueller-albrecht (Blackbelt) Last updated on 07/10/2018 - 08:00
Article

Using Open vSwitch* with DPDK for Inter-VM NFV Applications

This article walks you through configuration of OVS with DPDK for inter-VM application use cases. Create an OVS vSwitch bridge with two DPDK vhost-user ports, each connected to a separate VM, then use a simple iperf3 throughput test to evaluate performance.
Authored by Emani, Ashok (Intel) Last updated on 03/05/2019 - 22:30
Article

Network Recipes for an Evolving Data Center

The networking world is rife with buzz words like SDN, NFVs, Cloud, and Virtualized everything for network switches, routers, firewalls, load balancers, web servers, and other communication functions. Commodity NICs can replace expensive, specialized hardware devices for much less cost and can easily be reconfigured as requirements change. When you are ready for SDN/NFV, where to start, what to...
Authored by Last updated on 07/13/2018 - 14:32
Article

Set Up Intel® Open Network Platform for SDN/NFV Development

Intel® Open Network Platform (Intel® ONP) is a reference architecture that provides engineering guidance and supports ecosystem enablement to encourage widespread adoption of SDN and NFV solutions in Telco, Enterprise, and Cloud Services. This article will detail how to quickly deploy and verify Intel ONP using virtual machines (VM).
Authored by Emani, Ashok (Intel) Last updated on 07/13/2018 - 14:32
Article

Set Up Intel® Clear Containers with Docker

Get started using the application with Docker on physical or virtual machines that run Linux.
Authored by James C. (Intel) Last updated on 06/12/2017 - 09:49
Video

Creating Virtual Functions Using SR-IOV

SRIOV mode allows partitioning of SR-IOV capability on Ethernet NIC resources logically, and expose them to a virtual machine as a separate PCI function called a “Virtual Function”.

Authored by Nancy Y. (Intel) Last updated on 09/11/2018 - 16:14
Article

Configure SR-IOV and Create a Set of Virtual Functions

SR-IOV enables configuration of a single physical network port to provide virtual functions (VFs) to a set of virtual machines (VMs). Learn how to configure SR-IOV by following the steps in this article.
Authored by Nancy Y. (Intel) Last updated on 07/13/2018 - 14:32
Video

Intel® QuickAssist Technology: Virtualization

This video provides an introduction to the virtualization use case with Intel® QuickAssist Technology Software.

Authored by Joel Auernheimer (Intel) Last updated on 02/05/2019 - 13:10
Article

Step by Step Guide on How to Enable Intel® VT-d and Perform Direct Device Assignment

This guide shows step by step instructions on how to "direct assign" Intel 85276 NIC to a virtual machine using Intel® VT-d technology.
Authored by Aamir Yunus (Intel) Last updated on 04/05/2019 - 15:39
Article

Talk with MATLAB* over Intel® Quark™ Microcontroller UART

Intel® System Studio 2016 for Microcontrollers is an integrated tool suite for developing, optimizing, and debugging systems and firmware for the Intel® Quark™ microcontroller D2000 and Intel® Quark™ SE microcontroller development boards, which offers a microcontroller core to enable applications from device control to edge sensing IoT solutions.
Authored by SEUNG YOUNG K. (Intel) Last updated on 05/29/2019 - 15:53