Filters

Article

Set Up Serial Terminal on the Intel® Galileo Board for Mac*

Authored by admin Last updated on 09/28/2016 - 14:05
Article

Intel® XDK FAQs - IoT

Can Intel XDK IoT edition run alongside the regular Intel XDK?
Authored by Anusha M. (Intel) Last updated on 09/28/2016 - 14:05
Article

Getting Started with Galileo and Arduino

This article describes how to get started with the Intel® Galileo board and the Arduino* IDE.
Authored by Joseph B. (Intel) Last updated on 09/28/2016 - 14:05
Documentation

Assembling and connecting your board from Intel® Edison Board User Guide

This section contains steps to set up your Intel® Edison board and connect it to your computer. Steps for your board may vary depending on the breakout board you have purchased. See the appropriate link below:

Last updated on 09/28/2016 - 14:18
Documentation
Documentation

Installing your integrated development environment (IDEs) from Intel® Edison Board User Guide

This section contains links to install an integrated development environment (IDE) to program your Intel® Edison board. You can download the installers for each IDE from the IDE downloads page.

Last updated on 09/28/2016 - 14:18
Documentation

Flashing your firmware from Intel® Edison Board User Guide

This section contains steps to update (flash) the firmware on your Intel® Edison board. The firmware is your board's operating system, and also allows for use of Wi-Fi*, Bluetooth*, analog and digital controls, and other functions. It's important to keep your firmware up-to-date to ensure the best stability and performance for your board. While flashing your firmware is...

Last updated on 09/28/2016 - 14:18
Documentation

Installing Flash Tool Lite on Mac* OS X* from Intel® Edison Board User Guide

If you have a host system with 64-bit Windows* or Mac* OS X*, the setup tool for the Intel® Edison board replaces this method of flashing your board. For steps for your host system, see the steps for Windows or Mac.

Last updated on 09/28/2016 - 14:18
Documentation

Note on P/E cycle from Intel® Edison Board User Guide

Last updated on 09/28/2016 - 14:18
Documentation

Using the command line with Flash Tool Lite from Intel® Edison Board User Guide

The Flash Tool Lite provides a command line interface for flashing your board. To use this tool, navigate to the location where you have installed Flash Tool Lite (for example, C:\Program Files (x86)\Intel\Phone Flash Tool Lite) and run the binary file for the command line tool, which is phoneflashtoollitecli.

Last updated on 09/28/2016 - 14:18
For more complete information about compiler optimizations, see our Optimization Notice.