Hsieh A.Wed, October 19th 2016 - 21:52
AMT_SDK_11.6 1
Hi Sir Could you help provide  AMT_SDK_11.6 tool package for test, Due to your website only update to There in my E-mail ""   Thanks a lot...  
Bom K.Tue, October 18th 2016 - 20:52
SSD 600P speed issue1
-      Questions: 1.     Cannot run at full speed but runs at poor write speed. Please let me know if there is certain setting I am missing out on here. OS: Windows 10 Enterprise LTSB, OS build 10240.16549 Current position: Other NVMe SSD tested(Acceptable speed) in the same system but Intel SSD...
Stefan S.Thu, October 6th 2016 - 8:39
Need help with Intel AMT and a S5520UR Board with a USB Bootstick1
Hi there, i have here a S5520UR with a defect ECC RAM Module. Unfortunately, VMWare ESXI does not show which RAM module is defective. I would now like a Linux USB stick with the right Intel AMT software. I then hope, that i will find the defective RAM module via the AMT web interface. Where ...
ANU J. (Intel)Mon, October 3rd 2016 - 22:46
Vpro USBr boot failed1
Using Intel(R) vPro(tm) Platform Solution Manager to install OS on host:  Storage Redirection - > CD source - > ISO image -> Select Start USBR + Reboot Getting error - RCO/USBR boot failed. Is installation of OS through storage Redirection supported? 
Gidion S.Mon, October 3rd 2016 - 4:11
Question vPro1
Hello, I have a server in a datacenter. When Windows crashes, I have to rush to the datacenter and reboot the server by hand. I've looked into vPro, and it sound really good! Now the question: Can I use vPro to reboot the server? (kill power and reboot again). The server has a static IP and uses ...
C M A.Mon, September 26th 2016 - 6:13
Intel(R) Active Management Technology - SOL (COM3) "doesn't exist"2
I have Windows 10, 64 bit and last week, without warning and while I was away from my PC, the Anniversary Windows 10 upgrade happened.  It took forever to complete and once done, I encountered many problems with sound and drivers and also that all my restore points had been deleted. My drivers ar...
Johnny L.Fri, September 23rd 2016 - 7:05
Error applying IPV4 Parameters5
I am trying to use Usb to manually provisioning 100 notebooks. The model is HP X2 1012 and the CPU is M7-6y75 with vpro. I have downloaded the sdk tool and used ACUConfig.exe configviausb with /usingdhcp which created a setup.bin file. I saved the file to the usb stick and proceeded to boot from ...
Ken L.Wed, September 21st 2016 - 17:31
Intel ME on Broadwell-DE8
Hi, We have a Broadwell-DE CPU board. We download the Yocto BSP for Broadwell-DE and install on the board. But we found that the mei driver cannot installed successfully. The kernel shows 'Device doesn't have valid ME Interface'. Any suggestion ?
Anand N.Tue, September 20th 2016 - 9:49
Intel AMT - How to access CIM element AMT_PublicKeyManagementService1
Hi, I am trying to provision a Lenovo Thinkpad T420 and T430 devices via Intel AMT. With Intel AMT enabled, I can see that these devices listen on non-TLS port 16992. But the requirement is to provision these devices using TLS PKI mode via TLS port 16993. I have tried to follow the instructions g...
Joshua P.Thu, September 8th 2016 - 8:24
Cannot configure AMT9
When I try and run the ACU Wizard from the Configurator_download_package_11.0.0.214 I receive this error message, "Call to function failed with return code". I have already gone into the BIOS and setup the AMT configuration via MEBx. I will await your suggestions. Thank you.
Subscribe to Forums