Allen R.Mon, October 24th 2016 - 7:17
Hello, I am not a developer. I'm an operations engineer responsible for SCCM in my organization. I just updated SCCM to 1511 and the out of band management server role was deprecated. I've installed MeshCommander. When I run meshcommander on a local machine and connect to the vPro technology (...
Anton B.Fri, October 21st 2016 - 1:32
Hello everybody, I wrote a post on the processor forum (https://communities.intel.com/thread/107531) and was redirected to this forum instead so I am posting the same question here instead. I am a software developer for a company where we deliver full hardware and software solutions running o...
Hsieh A.Wed, October 19th 2016 - 21:52
Hi Sir Could you help provide AMT_SDK_11.6 tool package for test, Due to your website only update to 220.127.116.11 There in my E-mail "firstname.lastname@example.org" Thanks a lot...
Bom K.Tue, October 18th 2016 - 20:52
- Questions: 1. Cannot run at full speed but runs at poor write speed. Please let me know if there is certain setting I am missing out on here. OS: Windows 10 Enterprise LTSB, OS build 10240.16549 Current position: Other NVMe SSD tested(Acceptable speed) in the same system but Intel SSD...
Stefan S.Thu, October 6th 2016 - 8:39
Hi there, i have here a S5520UR with a defect ECC RAM Module. Unfortunately, VMWare ESXI does not show which RAM module is defective. I would now like a Linux USB stick with the right Intel AMT software. I then hope, that i will find the defective RAM module via the AMT web interface. Where ...
ANU J. (Intel)Mon, October 3rd 2016 - 22:46
Using Intel(R) vPro(tm) Platform Solution Manager to install OS on host: Storage Redirection - > CD source - > ISO image -> Select Start USBR + Reboot Getting error - RCO/USBR boot failed. Is installation of OS through storage Redirection supported?
Gidion S.Mon, October 3rd 2016 - 4:11
Hello, I have a server in a datacenter. When Windows crashes, I have to rush to the datacenter and reboot the server by hand. I've looked into vPro, and it sound really good! Now the question: Can I use vPro to reboot the server? (kill power and reboot again). The server has a static IP and uses ...
C M A.Mon, September 26th 2016 - 6:13
I have Windows 10, 64 bit and last week, without warning and while I was away from my PC, the Anniversary Windows 10 upgrade happened. It took forever to complete and once done, I encountered many problems with sound and drivers and also that all my restore points had been deleted. My drivers ar...
Johnny L.Fri, September 23rd 2016 - 7:05
I am trying to use Usb to manually provisioning 100 notebooks. The model is HP X2 1012 and the CPU is M7-6y75 with vpro. I have downloaded the sdk tool and used ACUConfig.exe configviausb with /usingdhcp which created a setup.bin file. I saved the file to the usb stick and proceeded to boot from ...
Ken L.Wed, September 21st 2016 - 17:31
Hi, We have a Broadwell-DE CPU board. We download the Yocto BSP for Broadwell-DE and install on the board. But we found that the mei driver cannot installed successfully. The kernel shows 'Device doesn't have valid ME Interface'. Any suggestion ?