Main Features

  • Intel® Curie™ module dual-core ((Intel® Quark™ processor core and ARC* core) with Bluetooth® low energy, 6-axis combo sensor and pattern matching engine
  • 14 digital input/output pins (four can be used as PWM output pins)
  • Four PWM output pins
  • Six analog input pins
  • Strictly 3.3 V I/Os only
  • 20 mA DC current per I/O pin
  • 196 kB Flash memory
  • 24 kB SRAM
  • 32 MHz clock speed
  • USB connector for serial communication and firmware updates (DFU protocol)
  • 35 mm length and 26 mm width


The following documents are available on element14 website:

Schematics and Layouts

The board support package files and list of material for tinyTILE* board are available on element14 website:

Digital and Analog I/Os

The 20 general purpose I/O pins can be used for digital input and digital output. All pins operate at strictly 3.3 V and can be used as interrupt source. Each pin can source or sink a maximum of 20 mA current.

Among the 20 I/O pins:

  • The four pins numbered 3, 5, 6 and 9  can be used for PWM output.
  • The six pins labeled A0, A1, A2, A3, A4, A5 provide a 10-bit resolution and measure values from ground to 3.3 V.
  • The serial pins labeled 0 (RX) and 1 (TX) are used to receive (RX) and transmit (TX) serial data.
  • All pins can trigger an external interrupt, that is an interrupt on a low value, a high value, on a rising edge or a falling edge. In addition, the pins labelled 2, 5, 7, 8, 10, 11, 12, 13 can trigger an external interrupt on a change or value.
  • The SDA and SCL pins support serial data transfer using I2C/TWI protocol.

Power Supply

There are two ways to power the tinyTILE* board:

  • By using the USB connection
  • By inserting the leads from a battery in the GND and Vin pin headers of the power connector

List of Material

You need to the following equipment to use the tinyTILE* board with the open developer kit for Intel® Curie™ module:

Connection to Host

See "Connecting and Verifying the Board Proof of Life".

Getting Started with the Board

See "Connecting and Verifying the Board Proof of Life".

Para obtener información más completa sobre las optimizaciones del compilador, consulte nuestro Aviso de optimización.