MPS and Manageability Commander Tool IMR_RES_SOCKS_ERROR

MPS and Manageability Commander Tool IMR_RES_SOCKS_ERROR

Hi,

Using the MPS server do not work redirect functions: (Serial-over-LAN, IDE Redirect and Redirection Port).

From the console Manageability Commander Tool, I have error IMR_RES_SOCKS_ERROR.
Other AMT functions are working properly using the MPS server.

What can I do to redirect works correctly ??

-------------------
Rafal

18 posts / 0 nouveau(x)
Dernière contribution
Reportez-vous à notre Notice d'optimisation pour plus d'informations sur les choix et l'optimisation des performances dans les produits logiciels Intel.

Hi - is Redirection enabled in the Bios (is the listener on?)Could you run the SCS Discovery tool and attach your results? Here is a blog that provides instructions on how to run it:How to run the SCS Discovery ToolAlso, I believe the Commander has some check boxes that allow you to enable Redirection - you can let me know if those boxes are checked.Once I can see how your system is configured, I can help you better.Thanks,Gael

Follow me on Twitter: @GaelHof Facebook: https://www.facebook.com/GaelHof

Hi,

Logs:

<?xml version="1.0" encoding="UTF-8" standalone="no" ?>2012-01-25 15:24:06vprodemo.comTOR014Hewlett-PackardHP EliteBook 8540p NotebookCND1021XCZ68CVD Ver. F.0EMicrosoft Windows 7 Professional 68:B5:99:F7:CD:3A80E88418-F40D-11DE-81D0-B9F76E39904CfalsetrueFull AMT Manageability6.0.40.1215truetruetruetruetruetruetruevprodemo.comtor0146.0.40.12136.0.40.1213false

Thanks,

Rafal

Ahem.... some formatting to make it readable would have been appreciated.... ;) Could you please attach the actual html file?

Follow me on Twitter: @GaelHof Facebook: https://www.facebook.com/GaelHof

OK, in annex XML

Fichiers joints: 

Fichier attachéTaille
Télécharger tor014.vprodemo.com.xml2.01 Ko

Hi - in looking at the xml file, it is not indicating that IDE-R is actually enabled (it says it is enabled in the bios but not that you have actually have your AMT system configured to use the feature.)
When running the DTK, there are check boxes where you can enable SOL and IDER. Can you verify that you have selected those boxes?
I am also not seeing in your xml file whether or not AMT is configured and there doesn't seem to be an MEI driver installed. Did you let the tool finish running? It looks incomplete.

Follow me on Twitter: @GaelHof Facebook: https://www.facebook.com/GaelHof

I think this is a problem in configuration MPS server.

In the LAN everything works fine.

I believe that the "Manageability Developer Tool Kit" can not connect to SOCKS

Could you check whether or not your Proxy Server is running? When you add the MPS you might want to try using the IP Address rather than the name. Maybe it just can't resolve the name.

Follow me on Twitter: @GaelHof Facebook: https://www.facebook.com/GaelHof

I think that this is a problem in communicating to Proxy or Socks.

Unfortunately, enter the IP address in configuration files not solve problem :(

From file AMTRedirection.exe, Redirection works fine.

Iwants to configure the environment based on a single console

I think the suggestion to enter IP address is not for MPS configuration files but for adding the MPS in the commander tool based on the screenshot shown above. You mentioned that AMTRedirection.exe is working, are youusing the sameparameters (MPS address (hostname or IP), proxy port and socks port)when using your management console?

What proxy server is being used in your environment - apache or 3proxy?

In both cases, the parameters are the same (IP).
I use apache.

Hi Rafalp21,Did you review the Apache configuration guide in the SDK? For Apache configuration instructions, see the documentApache_MPS_Proxy_Manual.txtlocated at
:\Windows\Intel_AMT\Bin\MPS\Apache.

Follow me on Twitter: @GaelHof Facebook: https://www.facebook.com/GaelHof

This is the main Apache HTTP server configuration file. It contains the

# configuration directives that give the server its instructions.

# See for detailed information.

# In particular, see

#

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do. They're here only as hints or reminders. If you are unsure

# consult the online docs. You have been warned.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path. If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"

# with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2.2" will be interpreted by the

# server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".

#

# NOTE: Where filenames are specified, you must use forward slashes

# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").

# If a drive letter is omitted, the drive on which Apache.exe is located

# will be used by default. It is recommended that you always supply

# an explicit drive letter in absolute paths to avoid confusion.

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path. If you point

# ServerRoot at a non-local disk, be sure to point the LockFile directive

# at a local disk. If you wish to share the same ServerRoot for multiple

# httpd daemons, you will need to change at least LockFile and PidFile.

#

ServerRoot "C:/Program Files/Apache Software Foundation/Apache2.2"

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the

# directive.

#

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#

#Listen 12.34.56.78:80

Listen 172.20.203.122:8080

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Example:

# LoadModule foo_module modules/mod_foo.so

#

LoadModule actions_module modules/mod_actions.so

LoadModule alias_module modules/mod_alias.so

LoadModule asis_module modules/mod_asis.so

LoadModule auth_basic_module modules/mod_auth_basic.so

#LoadModule auth_digest_module modules/mod_auth_digest.so

#LoadModule authn_alias_module modules/mod_authn_alias.so

#LoadModule authn_anon_module modules/mod_authn_anon.so

#LoadModule authn_dbd_module modules/mod_authn_dbd.so

#LoadModule authn_dbm_module modules/mod_authn_dbm.so

LoadModule authn_default_module modules/mod_authn_default.so

LoadModule authn_file_module modules/mod_authn_file.so

#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so

#LoadModule authz_dbm_module modules/mod_authz_dbm.so

LoadModule authz_default_module modules/mod_authz_default.so

LoadModule authz_groupfile_module modules/mod_authz_groupfile.so

LoadModule authz_host_module modules/mod_authz_host.so

#LoadModule authz_owner_module modules/mod_authz_owner.so

LoadModule authz_user_module modules/mod_authz_user.so

LoadModule autoindex_module modules/mod_autoindex.so

#LoadModule cache_module modules/mod_cache.so

#LoadModule cern_meta_module modules/mod_cern_meta.so

LoadModule cgi_module modules/mod_cgi.so

#LoadModule charset_lite_module modules/mod_charset_lite.so

#LoadModule dav_module modules/mod_dav.so

#LoadModule dav_fs_module modules/mod_dav_fs.so

#LoadModule dav_lock_module modules/mod_dav_lock.so

#LoadModule dbd_module modules/mod_dbd.so

#LoadModule deflate_module modules/mod_deflate.so

LoadModule dir_module modules/mod_dir.so

#LoadModule disk_cache_module modules/mod_disk_cache.so

#LoadModule dumpio_module modules/mod_dumpio.so

LoadModule env_module modules/mod_env.so

#LoadModule expires_module modules/mod_expires.so

#LoadModule ext_filter_module modules/mod_ext_filter.so

#LoadModule file_cache_module modules/mod_file_cache.so

#LoadModule filter_module modules/mod_filter.so

#LoadModule headers_module modules/mod_headers.so

#LoadModule ident_module modules/mod_ident.so

#LoadModule imagemap_module modules/mod_imagemap.so

LoadModule include_module modules/mod_include.so

#LoadModule info_module modules/mod_info.so

LoadModule isapi_module modules/mod_isapi.so

#LoadModule ldap_module modules/mod_ldap.so

#LoadModule logio_module modules/mod_logio.so

LoadModule log_config_module modules/mod_log_config.so

#LoadModule log_forensic_module modules/mod_log_forensic.so

#LoadModule mem_cache_module modules/mod_mem_cache.so

LoadModule mime_module modules/mod_mime.so

#LoadModule mime_magic_module modules/mod_mime_magic.so

LoadModule negotiation_module modules/mod_negotiation.so

LoadModule proxy_module modules/mod_proxy.so

#LoadModule proxy_ajp_module modules/mod_proxy_ajp.so

#LoadModule proxy_balancer_module modules/mod_proxy_balancer.so

LoadModule proxy_connect_module modules/mod_proxy_connect.so

#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so

LoadModule proxy_http_module modules/mod_proxy_http.so

#LoadModule rewrite_module modules/mod_rewrite.so

LoadModule setenvif_module modules/mod_setenvif.so

#LoadModule speling_module modules/mod_speling.so

#LoadModule ssl_module modules/mod_ssl.so

#LoadModule status_module modules/mod_status.so

#LoadModule substitute_module modules/mod_substitute.so

#LoadModule unique_id_module modules/mod_unique_id.so

#LoadModule userdir_module modules/mod_userdir.so

#LoadModule usertrack_module modules/mod_usertrack.so

#LoadModule version_module modules/mod_version.so

#LoadModule vhost_alias_module modules/mod_vhost_alias.so

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User daemon

Group daemon

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# definition. These values also provide defaults for

# any containers you may define later in the file.

#

# All of these directives may appear inside containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed. This address appears on some server-generated pages, such

# as error documents. e.g. admin@your-domain.com

#

ServerAdmin sdfsdf@wp.pl

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

#ServerName vpro:80

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs"

#

# Each directory to which Apache has access can be configured with respect

# to which services and features are allowed and/or disabled in that

# directory (and its subdirectories).

#

# First, we configure the "default" to be a very restrictive set of

# features.

#

Options FollowSymLinks

AllowOverride None

Order deny,allow

Deny from all

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# This should be changed to whatever you set DocumentRoot to.

#

#

# Possible values for the Options directive are "None", "All",

# or any combination of:

# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

#

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn't give it to you.

#

# The Options directive is both complicated and important. Please see

# http://httpd.apache.org/docs/2.2/mod/core.html#options

# for more information.

#

Options Indexes FollowSymLinks

#

# AllowOverride controls what directives may be placed in .htaccess files.

# It can be "All", "None", or any combination of the keywords:

# Options FileInfo AuthConfig Limit

#

AllowOverride None

#

# Controls who can get stuff from this server.

#

Order allow,deny

Allow from all

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

DirectoryIndex index.html

#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

Order allow,deny

Deny from all

Satisfy All

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a

# container, error messages relating to that virtual host will be

# logged here. If you *do* define an error logfile for a

# container, that host's errors will be logged there and not here.

#

ErrorLog "logs/error.log"

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

#

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

#

LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined

LogFormat "%h %l %u %t "%r" %>s %b" common

# You need to enable mod_logio.c to use %I and %O

LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio

#

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a

# container, they will be logged here. Contrariwise, if you *do*

# define per- access logfiles, transactions will be

# logged therein and *not* in this file.

#

CustomLog "logs/access.log" common

#

# If you prefer a logfile with access, agent, and referer information

# (Combined Logfile Format) you can use the following directive.

#

#CustomLog "logs/access.log" combined

#

# Redirect: Allows you to tell clients about documents that used to

# exist in your server's namespace, but do not anymore. The client

# will make a new request for the document at its new location.

# Example:

# Redirect permanent /foo http://vpro/bar

#

# Alias: Maps web paths into filesystem paths and is used to

# access content that does not live under the DocumentRoot.

# Example:

# Alias /webpath /full/filesystem/path

#

# If you include a trailing / on /webpath then the server will

# require it to be present in the URL. You will also likely

# need to provide a section to allow access to

# the filesystem path.

#

# ScriptAlias: This controls which directories contain server scripts.

# ScriptAliases are essentially the same as Aliases, except that

# documents in the target directory are treated as applications and

# run by the server when requested rather than as documents sent to the

# client. The same rules about trailing "/" apply to ScriptAlias

# directives as to Alias.

#

ScriptAlias /cgi-bin/ "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/"

#

# ScriptSock: On threaded servers, designate the path to the UNIX

# socket used to communicate with the CGI daemon of mod_cgid.

#

#Scriptsock logs/cgisock

#

# "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

AllowOverride None

Options None

Order allow,deny

Allow from all

#

# DefaultType: the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value. If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain

#

# TypesConfig points to the file containing the list of mappings from

# filename extension to MIME-type.

#

TypesConfig conf/mime.types

#

# AddType allows you to add to or override the MIME configuration

# file specified in TypesConfig for specific file types.

#

#AddType application/x-gzip .tgz

#

# AddEncoding allows you to have certain browsers uncompress

# information on the fly. Note: Not all browsers support this.

#

#AddEncoding x-compress .Z

#AddEncoding x-gzip .gz .tgz

#

# If the AddEncoding directives above are commented-out, then you

# probably should define those extensions to indicate media types:

#

AddType application/x-compress .Z

AddType application/x-gzip .gz .tgz

#

# AddHandler allows you to map certain file extensions to "handlers":

# actions unrelated to filetype. These can be either built into the server

# or added with the Action directive (see below)

#

# To use CGI scripts outside of ScriptAliased directories:

# (You will also need to add "ExecCGI" to the "Options" directive.)

#

#AddHandler cgi-script .cgi

# For type maps (negotiated resources):

#AddHandler type-map var

#

# Filters allow you to process content before it is sent to the client.

#

# To parse .shtml files for server-side includes (SSI):

# (You will also need to add "Includes" to the "Options" directive.)

#

#AddType text/html .shtml

#AddOutputFilter INCLUDES .shtml

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type. The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

#MIMEMagicFile conf/magic

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://vpro/subscription_info.html

#

#

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall is used to deliver

# files. This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

#

#EnableMMAP off

#EnableSendfile off

# Supplemental configuration

#

# The configuration files in the conf/extra/ directory can be

# included to add extra features or to modify the default configuration of

# the server, or you may simply copy their contents here and change as

# necessary.

# Server-pool management (MPM specific)

#Include conf/extra/httpd-mpm.conf

# Multi-language error messages

#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings

#Include conf/extra/httpd-autoindex.conf

# Language settings

#Include conf/extra/httpd-languages.conf

# User home directories

#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration

#Include conf/extra/httpd-info.conf

# Virtual hosts

#Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual

#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)

#Include conf/extra/httpd-dav.conf

# Various default settings

#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections

#Include conf/extra/httpd-ssl.conf

#

# Note: The following must must be present to support

# starting without SSL on platforms with no /dev/random equivalent

# but a statically compiled-in mod_ssl.

#

SSLRandomSeed startup builtin

SSLRandomSeed connect builtin

ProxySocks On

ProxySocksIp 172.20.203.122

ProxySocksPort 4322

ProxySocksDnsMode Remote

ProxySocksAuth off

ProxySocksUsername administrator

ProxySocksPassword xxxxxxxxxxxxx

ProxyRequests On

ProxyVia On

Order deny,allow

Deny from 192.168.2.77

Allow from all

Hello - I'm sorry for the delay. I bumped into another forum issue that you might find helpful:http://software.intel.com/en-us/forums/showpost.php?p=148459
What version of Apache are you using? For Apache, it looks like it only works with 2.2.8 version, you can download it fromhere.

From the forum post above:
Another thing, I typically have found that using the local loop back IP address for proxy server did not work very well. Even if the MPS and proxy server are installed on a same machine, I recommend using the IP address instead of local loop back adapter. For example, this is what I use in my httpd.conf file:

Listen 192.168.1.1:8089

ProxySocks On

ProxySocksIp 192.168.1.1

ProxySocksPort 4322

ProxySocksDnsMode Remote

ProxySocksAuth Off

ProxySocksUsername testusername

ProxySocksPassword testpassword

ProxyRequests On

ProxyVia On

Order deny,allow

Deny from all

Allow from all

AllowCONNECT 443 623 664 16992 16993 16994 16995 5900

Let me know if this helps - there are definintely differences in the settings here compared to your file - but it is difficult to do a quick comparison with all the comments still in there. (sorry!)

Follow me on Twitter: @GaelHof Facebook: https://www.facebook.com/GaelHof

You need to useCommander 5 (ver.0.6.0937.2) or Commander 6 (ver.6.0.10097.2orver.6.0.10314.2), but Commander 7 (ver.7.0.11161.2 or ver.7.0.12102.2) still have this error (IMR_RES_SOCKS_ERROR).

Update:

Problem (IMR_RES_SOCKS_ERROR via MPS)resolved, you need to usefixedCommander 7(topicManageability Developer ToolKit 7.0.12102.2 fixed IMR_RES_SOCKET_ERROR for MPS).

Have you tried ths with the Open Source DTK?

Follow me on Twitter: @GaelHof Facebook: https://www.facebook.com/GaelHof

Laisser un commentaire

Veuillez ouvrir une session pour ajouter un commentaire. Pas encore membre ? Rejoignez-nous dès aujourd’hui