simulation buttons not working

simulation buttons not working

verion 3.0 of mca, the sample barcode .net app compiled and ran, but the Shift-F1 did not work and the configuration editor does not list the simulation buttons as per the documentation. The MCA application is running, visible in tool tray.

4 posts / 0 nouveau(x)
Dernière contribution
Reportez-vous à notre Notice d'optimisation pour plus d'informations sur les choix et l'optimisation des performances dans les produits logiciels Intel.

Hi dreabc

How are you testing SHIFT-F1?

The easiest way to test this is to open Notepad, make it the active window, and then press SHIFT-F1 and the MCA will populate the simulate barcode value into Notepad. For the SHIFT-F1 function to work you must have a application open and waiting for the data input from the SHIFT-F1 action.

The other thing that cause a problem is if you have the MCA tool tray application running, but the IntelHealthCare service disabled. Both need to be running.

Thanks,

Steve

thanks but still nothing. I checked to tool tray and the services. tried the notepad and button test app in the Intel...bin folder. The test barcode net app does read a bar code when the mouse button is pressed. I reinstalled the SDK for 2.0.1 as that matches the drivers on the target.

OK DU! had the F Lock which reassgns the F keys on this laptop. Thank anyway.

Laisser un commentaire

Veuillez ouvrir une session pour ajouter un commentaire. Pas encore membre ? Rejoignez-nous dès aujourd’hui