barcode prefix setting per application

barcode prefix setting per application

I am using the MCA software with the default action/handler for barcode. I have one application that requires a specific barcode prefix and postfix, but all other applications do not use the unique prefix/postfix combination. Is there a way to configure the barcode prefix and postfix on a per application basis?

2 posts / 0 nouveau(x)
Dernière contribution
Reportez-vous à notre Notice d'optimisation pour plus d'informations sur les choix et l'optimisation des performances dans les produits logiciels Intel.

If you are using MCA software v2.x or later, you can configure the barcode to use a specific prefix and/or postfix for each application. Lets say for example you would like to add $$ as the post fix and prefix for each barcode for a specific application (but not other applications) you can use these steps to do so:

1. Make sure the application for which the $$ prefix/postfix is installed on the system.

2. Open up the configuration editor in advanced mode by:

A. Open a windows command prompt

B. Change directory to the location the configuration editor is installed

C. Type cfgeditor a

3. Expand the MCA Application entry

4. Expand the Default Handler Action entry

5. Right click on Applications and select Add

A. On the left side, under Applications, Application[0] should appear and be highlighted

6. On the right hand side, click in the value field for the Application Name 2 times (Not a double click)

A. A browse button should appear

7. Click the browse button, and navigate to the application for which the prefix/postfix should be applied

8. On the right hand side, click in the value field for the Prefix 2 times (Not a double click)

A. The text Default Handler[0] should appear as well as a Register button.

9. Click the Register button

10. Expand the Application[0] entry

11. Expand the BarcodeDefaultHandler.dll entry

12. Click on Barcode

13. Enter the prefix/postfix on the right hand side

A. For non-Alpha characters, you will want to use virtual keycodes.

B. This means that for $$, you would use {SHIFT}+{VK052}+{VK052}+{VK052}

Note: You can search for Microsoft virtual key codes on the internet to get a listing

14. Click the Apply button at the bottom of the configuration editor.

15. From the Tools menu, select Reload MCA Application Configuration.

Laisser un commentaire

Veuillez ouvrir une session pour ajouter un commentaire. Pas encore membre ? Rejoignez-nous dès aujourd’hui