Filtres

Documentation

Getting Started Tutorial de Intel® XDK Documentation

This short tutorial and its demo app help you get started with the Intel® XDK by walking you through a typical end-to-end workflow you can ultimately apply to your own app development process.
Dernière mise à jour le 10/02/2016 - 08:59
Documentation

常见问题解决方法 de 英特尔® XDK 文档

本指南包含故障排除信息以及使用英特尔 XDK IoT 版为 Galileo 或 Edison 开发板进行编程时常见的问题解答。要了解英特尔® XDK 物联网专版安装步骤,请参阅《英特尔 XDK 物联网专版使用指南》。

Dernière mise à jour le 10/02/2016 - 02:02
Documentation

Step 5: Set up your IDE de Getting Started with the Intel® Edison Board on Linux*

Now that you have set up your Intel® Edison board, you can get started programming your board. You chose your programming language and IDE when you ran the integrated installer. For next steps to get started with your preferred language, choose the appropriate link below:

Dernière mise à jour le 09/02/2016 - 13:35
Documentation

Step 3: Set up a serial terminal de Getting Started with the Intel® Edison Board on Linux*

This section contains steps to set up serial communication with your board. Serial communication gives you access to the Yocto-built Linux* operating system running on your board. Once you're connected, you can use Linux commands to change the hostname and password of your board, set up a Wi-Fi* connection, flash your board's firmware, and more.

Dernière mise à jour le 09/02/2016 - 13:35
Documentation

Step 4: Connect over Wi-Fi* de Getting Started with the Intel® Edison Board on Linux*

This guide contains steps to set up network access to your Intel® Edison board and obtain an IP address.

Dernière mise à jour le 09/02/2016 - 13:34
Documentation

Step 1: Assemble your board de Getting Started with the Intel® Edison Board on Linux*

The Intel® Edison module is meant to be used with a breakout board, so you need to secure your Intel® Edison module to your breakout board before you can use it. The steps to do this vary based on the type of breakout board you have. Choose your breakout board below:

Dernière mise à jour le 09/02/2016 - 13:29
Documentation

Arduino* IDE Getting Started Guide de Arduino* IDE Getting Started Guide

This guide contains steps to start programming your Intel® Edison or Intel® Galileo board with Arduino. Included are steps to install the Arduino* IDE and run a quick "Hello, World" application that blinks an LED on your board.

Dernière mise à jour le 08/02/2016 - 15:54
Documentation

Installing the Arduino* IDE de Arduino* IDE Getting Started Guide

This guide contains steps to install the Arduino IDE on a system with Windows*, Mac* OS X*, or Linux*.

Dernière mise à jour le 08/02/2016 - 15:54
Documentation

Blinking an LED with the Arduino* IDE de Arduino* IDE Getting Started Guide

This guide will teach you how to run a sample sketch on your Intel® IoT board using Arduino*. These instructions are geared toward the Intel® Edison module with the Arduino expansion board, but can also be applied to the Intel® Galileo board. Steps for the Intel® Edison module with mini breakout board may vary slightly.

Dernière mise à jour le 08/02/2016 - 15:54
Pour de plus amples informations sur les optimisations de compilation, consultez notre Avertissement concernant les optimisations.