1360X768 on 945 GM Express Chipset

1360X768 on 945 GM Express Chipset

I am trying to use the 1360X768 resolution for my LCD TV but I can't seem to get the resolution to go above 1024X768. I've read other articles about changing DTD things, but I have no clue what any of this means. So if you wouldn't mind, could you respond in layman's terms. Her is my Moninfo:

Monitor
Model name............... SHARP LCDTV
Windows description...... Generic PnP Monitor
Manufacturer............. Sharp
Plug and Play ID......... SHP1003
Serial number............ n/a
Manufacture date......... 2007, ISO week 0
-------------------------
EDID revision............ 1.3
Input signal type........ Analog 0.700,0.000 (0.7V p-p)
Sync input support....... Separate
Display type............. RGB color
Screen size.............. 440 x 250 mm (19.9 in)
Power management......... Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... n/a

Color characteristics
Default color space...... Non-sRGB
Display gamma............ 2.20
Red chromaticity......... Rx 0.640 - Ry 0.334
Green chromaticity....... Gx 0.280 - Gy 0.604
Blue chromaticity........ Bx 0.144 - By 0.070
White point (default).... Wx 0.279 - Wy 0.287
Additional descriptors... None

Timing characteristics
Horizontal scan range.... 31-69kHz
Vertical scan range...... 55-86Hz
Video bandwidth.......... 100MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 1360x768p at 60Hz
Modeline............... "1360x768" 85.500 1360 1424 1536 1792 768 771 777 795 +hsync +vsync
Detailed timing #1....... 1280x768p at 60Hz
Modeline............... "1280x768" 79.500 1280 1344 1472 1664 768 771 778 798 -hsync +vsync

Standard timings supported
720 x 400p at 70Hz - IBM VGA
640 x 480p at 60Hz - IBM VGA
640 x 480p at 72Hz - VESA
640 x 480p at 75Hz - VESA
800 x 600p at 56Hz - VESA
800 x 600p at 60Hz - VESA
800 x 600p at 72Hz - VESA
800 x 600p at 75Hz - VESA
1024 x 768p at 60Hz - VESA
1024 x 768p at 70Hz - VESA
1024 x 768p at 75Hz - VESA
640 x 480p at 85Hz - Manufacturer
800 x 600p at 85Hz - Manufacturer
1024 x 768p at 85Hz - Manufacturer
1280 x 1024p at 85Hz - Manufacturer
1600 x 1200p at 75Hz - Manufacturer
640 x 480p at 85Hz - VESA STD
800 x 600p at 85Hz - VESA STD
1024 x 768p at 85Hz - VESA STD
1280 x 720p at 60Hz - VESA STD
848 x 477p at 60Hz - VESA STD

Report information
Date generated........... 1/29/2009
Software revision........ 2.20.0.779
Raw data................. 00,FF,FF,FF,FF,FF,FF,00,4D,10,03,10,01,01,01,01,00,11,01,03,68,2C,19,78,2A,EF,CA,A3,55,47,9A,24,
......................... 12,47,49,AF,CE,7C,31,59,45,59,61,59,81,C0,4B,C0,01,01,01,01,01,01,66,21,50,B0,51,00,1B,30,40,70,
......................... 36,00,00,00,00,00,00,1E,0E,1F,00,80,51,00,1E,30,40,80,37,00,00,00,00,00,00,1C,00,00,00,FD,00,37,
......................... 56,1F,45,0A,00,0A,20,20,20,20,20,20,00,00,00,FC,00,53,48,41,52,50,20,4C,43,44,54,56,0A,20,00,20

6 post / 0 nuovi
Ultimo contenuto
Per informazioni complete sulle ottimizzazioni del compilatore, consultare l'Avviso sull'ottimizzazione

Open your registry by typing "regedit" at the command line.

Click on HKEY_LOCAL_MACHINE in the left hand registry panel. Use CTRL-F to Find DTD_1. Change all instances of DTD_1 (there may be 12 or so, so you will have to use F3 to "Find Again" once you've modified the first one.

66 21 50 B0 51 00 1B 30 40 70 36 00 00 00 00 00 00 1E 37 01

Do another search, this time for TotalDTDCount. Change all instances of this (again, there may be lots) from "0" to "1".

You may also have to uncheck "Hide modes my monitor cannot display" in the standard Windows graphics properties box.

A reboot should have 1360x768 available to you if you've properly placed the above key in the registry.

You stated for me to change DTD_1 to something? But never stated what to change it to.
Did you want me to change it to the string of numbers you have posted? If you did, I did change it to those values.
Also the "Hide modes my monitor cannot display" check box is grayed out, so I cannot change that box even if I was able to.
I did search for the TotalDTDCount and changed the values as stated, and there is still no change in my resolution.
One other thing, I hooked this Tv up to another computer to see what it would do, and the other one recognized the proper resolution as it was supposed to automatically.

Quoting - Aaron Brezenski (Intel)

Open your registry by typing "regedit" at the command line.

Click on HKEY_LOCAL_MACHINE in the left hand registry panel. Use CTRL-F to Find DTD_1. Change all instances of DTD_1 (there may be 12 or so, so you will have to use F3 to "Find Again" once you've modified the first one.

66 21 50 B0 51 00 1B 30 40 70 36 00 00 00 00 00 00 1E 37 01

Do another search, this time for TotalDTDCount. Change all instances of this (again, there may be lots) from "0" to "1".

You may also have to uncheck "Hide modes my monitor cannot display" in the standard Windows graphics properties box.

A reboot should have 1360x768 available to you if you've properly placed the above key in the registry.

Hmmm... that should have worked, and has for others. My apologies for the typo: should have had an end paren and a colon to help clarify that those were indeed the values you have to put in DTD_1, but sounds like you cracked my code regardless.

If you're sure you got all the DTD_1s, and all the TotalDTDCounts done correctly, I'm low on ideas. :( Sorry.

Don't know why I spaced on this, but it's also possible your notebook vendor is forbidding 1360x768 in the BIOS. Don't know why they would, but you could get around it by using 1362x768 instead:

66 21 52AE 51 00 1B 30 40 70 36 00 00 00 00 00 00 1E 37 01

Quoting - Aaron Brezenski (Intel)

Don't know why I spaced on this, but it's also possible your notebook vendor is forbidding 1360x768 in the BIOS. Don't know why they would, but you could get around it by using 1362x768 instead:

66 21 52AE 51 00 1B 30 40 70 36 00 00 00 00 00 00 1E 37 01

So I tried the 1362X768 values, and still no success. But I do appreciate all of the advice and help that you've given me... I am not sure what seems to be the issue, but you do not have to rack your brain anymore for me... again, I really do appreciate all of your help. If you do think of anything else, you can let me know, but if not, don't worry about it. :) Thanks

Lascia un commento

Eseguire l'accesso per aggiungere un commento. Non siete membri? Iscriviti oggi