The Intel® Software License Manager is required to manage Intel® Software Development Products floating licenses in a development environment. The license manager is NOT required for single-user licenses.
This tutorial will help to setup your floating license environment very quickly.
Follow these steps and choose the setup scenario that matches best:
- Obtain your license file
- Set up the license manager
- Set up clients
This step can be skipped if the following conditions are true:
- Your license server is connected to the internet.
- You want to use the default port values.
- Your license server is not a cloud instance.
- Your license has not been activated on another server.
Please refer to the note 'Who is eligible to obtain a license file?' below.
You need a MAC address of the license server (optional the license server name) to register and create your license file.
Obtain a MAC address of the license server
- OS X*, Linux*:
- ifconfig - take any of the 'HWaddr' values displayed
- ipconfig /all - take any of the 'Physical Address' values displayed
Note: Remove all special characters from the string and - if required - fill up with leading zeros to get your 12-digits alphanumeric string which is your Host ID.
If you have the license manager tools already installed you can run:
and take any of the addresses issued.
Obtain the hostname of the license server
- Linux / OS X:
- echo %COMPUTERNAME%
Activate your Serial Number
If you have not registered your serial number yet, you must browse to the Intel® Registration Center and enter your SN and email, or if you are already logged in, your SN at the top right of the "My Products" page.
Once your serial number is registered, you can activate it in the registration center by entering the host ID and hostname you obtained earlier by following these steps:
- Login to the registration center
- Click the serial number under the "Serial Numbers" tab - if the serial number is greyed out, you are not the owner or administrator
- Enter the host information
- Click "Activate Serial Number"
Once the serial number is activated, you may download it. If your license server is not connected to the internet, you must copy the full server license file to the server. The default directory used by the license manager is:
- Linux / OS X:
- C:\[Program Files]\Common Files\Intel\ServerLicenses
- All systems:
- Directory specified in environment variable LM_LICENSE_FILE
You do not have to use the default, however.
Only the license owner or license administrator can perform a license registration and obtain a license file. Registered users have the right to download products and have read-access to the license history only.
How can I identify which role I have?
- Login to the Intel Registration Center
- Click on the related product on the left hand column "Product Subscription Information", for example:
- On the 'Subscription History' page click on 'Manage', for example:
- If you have access to the 'Manage' tool you are either the owner or license administrator. Registered users don't have access to the 'Manage' tool.
- If you have access you will see the Manage Page where you can see who the license owner and the license administrator are, for example:
You can use an existing FlexNet or FlexNet Publisher license manager (lmgrd) if its version is the same or higher as the version of the Intel vendor daemon (INTEL). The description in this section also applies to a redundant servers installation where all steps need to be done on all 3 license servers.
A single license server or a redundant license server configuration can manage licenses from clients running on different operating systems.
Please refer also to the Floating Licenses and Software License Manager Compatibility section.
Please set up your license manager according to one of the following scenarios that match best:
I have to install a new license manager on a license server
- Login to the Intel Registration Center. Find the Intel Software License Manager in your product list and click the Version link:
The Intel® Software License Manager User's Guide is also available from this download page.
- On the license manager download page there is the most current version available only.
- Access problems to the download page indicate that you don't have a valid floating license registration associated to your email.
- Only license owners and license administrators have access to the download page.
Linux* / OS X*
- Copy the downloaded file into the directory you want to install the license server.
- Extract the downloaded file, for example:
- tar xzvf l_isl_server_p_2.xxx.tar.gz (Linux)
- tar xzvf m_isl_server_p_2.xxx.tar.gz (OS X)
- Change to the newly created directory and run the installer:
- install.sh - command line
- install_GUI.sh - graphical interface
- Note that the Intel License Manager requires Linux* Standard Base (LSB) compliance version 3 or higher. See this article on the problems resulting when LSB 3 is not met, and how to fix them.
- Run the self-extracting w_isl_server_p_2.xxx.exe file and follow the instructions provided with the graphical installation wizard.
When prompted for the license, you can either enter the serial number if the server is connected to the internet, or you can provide the path to the license file. If you put the license file in the default directory, it should detect it automatically.
Providing the serial number will automatically download the license file to the default license directory. If your license was not already activated, it will automatically activate it with the server's host ID, hostname, and default ports.
When the installer is completed, it will start the license manager processes automatically. There are two ports used by the license manager: one for the FlexNet daemon (lmgrd), and one for the INTEL daemon. They must both be open!
Start the license manager
You can skip this section if your license manager was already started by the installer.
Linux* / OS X*
From the license manager directory (/licenseserver) start the license manager lmgrd. You can specify a single license file or a license directory (if you more license files). By default, the license file name is server.lic which was created by the license manager installation. However you can move any valid floating license into the /flexlm directory and start it with the license manager. Creating a log file with option -l is optional.
lmgrd -c server.lic -l flexnet_logfile.txt (reads server.lic license file and creates logfile)
lmgrd -c . -l flexnet_logfile.txt (reads all .lic files from the flexlm directory and creates logfile)
You can run the license manager under Windows as system service (recommended) or as user application in a command shell (sometimes required for some Windows OS versions).
- System service:
- Start > Intel(R) Software Development Products > Intel(R) Software License Manager and browse to the license file.
- User application:
- Open a command shell
- Navigate to c:\Program Files (x86)\Common Files\Intel\LicenseServer\
- lmgrd -c server.lic -l flexnet_logfile.txt (reads server.lic license file and creates logfile)
Important! Each time you start lmgrd, the vendor daemon port will be assigned. Unless you specify the INTEL port in the license file, there is no guarantee that the same port will be used. Make sure that it is not blocked by the firewall!
First make sure you are using the latest version of the Intel Software License Manager.
You can copy all license files into a license directory or combine licenses into one single license file (.lic).
Use a license directory
- Create a new license directory (recommended: Use the existing serverlicenses directory)
- Copy all existing and new license files there (no need to edit and combine license files)
- Have the license manager re-read the license directory
lmgrd lmreread –c <license_dir>
On Windows you can re-read the new license also via the license manager GUI (Start > Intel(R) Software Development Products).
- Make sure that the SERVER and VENDOR lines are identical
- Remove the SERVER and VENDOR lines of your new license file
- Copy rest of contents of new license into the existing license file using a plain text editor*
- Have the license manager re-read the combined license file, for example
lmgrd lmreread –c <combined_license_file>
On Windows you can re-read the new license also via the license manager GUI (Start > Intel(R) Software Development Products)
*Note that using a word processor may introduce invalid characters and corrupt the license file.
I need to add an Intel software license to an existing FlexNet/FlexNet Publisher license manager (lmgrd) already running for a third party.
Same as above, but you need to make sure that the license manager lmgrd is of same or higher version as the Intel Vendor Daemon INTEL/INTEL.exe.
Check for compatibility
- Download and install the Intel license manager as described above
- Run the Intel Vendor Daemon as follows:
- Run the license manager as follows:
If the major and minor versions of lmgrd is the are the same or higher than the INTEL vendor daemon's versions you can use the existing license manager with the Intel Vendor Daemon. Otherwise you need to install an Intel License Manager in parallel to the existing license manager and run it on a different port.
Add Intel Vendor Daemon to an existing license manager
- Download the Intel license manager package as described above.
- Extract downloaded package on a temp dir:
Note: Under Windows you cannot change the installation directory. So in order to not overwrite an existing license manager installation, install it on another PC!
- Take the Intel Vendor Daemon file INTEL / INTEL.exe and copy it to a directory on the license server (recommended: Use existing directory where the license manager lmgrd / lmgrd.exe) is running.
- If required (i.e. if you copy the Intel vendor daemon not into the default directory) edit the license file and specify a path where the vendor daemon is located, for example
VENDOR c:\Program Files (x86)\Common Files\Intel\LicenseServer\INTEL.exe
- Combine licenses or create a new license directory as described above.
- Restart the license manager as described above.
Important! Each time you start lmgrd, the INTEL daemon port will be assigned. Unless you specify the INTEL port in the license file, there is no guarantee that the same port will be used. Make sure that it is not blocked by the firewall!
I need to change the port number
There are two core components to the license server, both of which must not be blocked by a firewall:
lmgrd - FlexNet daemon
- Common for all vendors
- TCP port is defined on the SERVER line(s) of the license file
- Intel uses 27009 as a default
- The SERVER port number should be changed in the registration center and the license file regenerated. It can be changed in the license file directory but this is not recommended.
INTEL - vendor daemon
- Launched automatically by FlexNet daemon according to the VENDOR line in the license file.
- TCP port is defined on the VENDOR line. If a port is not defined, it will be assigned by the OS at daemon start-up.
- No default ports documented
- The VENDOR port number can be changed in the license file without making any changes in the registration center or regenerating the license.
To change the lmgrd port number from 27009 to 27005, change the SERVER line(s) to:
SERVER servername 000000000000 27005
To specify the INTEL vendor port number as 28519, change the VENDOR line to:
VENDOR INTEL port=28519
Take care in changing the license file, or you may invalidate it.
There are several ways to setup a floating licensed product on client machine, but the most appropriate ones for an existing product installation or new / update installation on clients are listed in this section.
Please note that this section applies to a single-license-server configuration only. Please refer to the Tips & Tricks section to use this method also for a redundant server configuration.
New product installation on client
- Start the product installer
- When it comes to product activation, the default activation option will be "Use Serial Number." You can either:
- Enter the serial number to automatically download the client license file
- Do not use this option, but select "Alternative Activation > Use License Server" instead and specify the server name and port of the license server.
- Enter a path to a license file not in the default directories.
CAVEAT! In complex environments this step may take long time (several minutes) until client-server connection and license verification/installation is finished. But if the license check appears to be hanging, check that the port used by the INTEL daemon is not blocked by a firewall and try the installation again.
Product already exists on client
First make sure that any invalid licenses are not left on the client system. This can cause slow license checks.
There are two ways to provide the license information:
If the environment variable INTEL_LICENSE_FILE does not already exist, you can create it with the value port@host where the port is the one specified in the first line of the license file (lmgrd), and the host is the server hostname. If the INTEL_LICENSE_FILE environment variable does exist, you can overwrite it.
Use the client license file
You can download the client version of the license file from the Intel Registration Center. This contains the top line of the server license, followed by USE_SERVER on the next line. You can also modify the server license to have the same:
SERVER <server_name|IP-address> <ANY|<server_MAC_address> <port>
Next, copy the file to the default license directory:
- /opt/intel/licenses (for a (sudo)root installation)
- $HOME/intel/licenses (for a user installation)
- OS X:
- /Users/Shared/Library/Application Support/Intel/Licenses
- c:\Program Files (x86)\Common Files\Intel\Licenses\ (on 64-bit Windows systems)
- c:\Program Files\Common Files\Intel\Licenses\ (on 32-bit Windows systems)
Again, be sure to remove (or rename) all old or unused .lic files in the license directory.
Update installation on client
- Start the product installer
- When it comes to product activation, the default activation option will be "Use Existing Activation." Select that option only if you are sure that the right server license was already set up with a previous installation. Otherwise select the following:
- Use "Alternative Activation > Use License Server" and specify the server name and port of the license server.
How to best setup a redundant server configuration
Setup of a redundant license server configuration remotely as described above is not supported by default, but you can perform the same steps as described above by referencing one of the servers only. After installation and server set up you can "expand" your client license by adding the other 2 servers in the client license, such as:
SERVER <servername1> ANY <port>
SERVER <servername2> ANY <port>
SERVER <servername3> ANY <port>
How to check license configuration from client
You can use the license manager diagnostic tools also on the client to perform the same license server checks as on the server.
Copy over the lmstat tool from the license server to the client.
Instead of using the license file or license directory use port@server as license parameter to invoke lmstat on the client, for example:
lmstat -a -c <port>@<servername>
How to check which license is being used
On Linux a very comfortable method is available to check which license and license server are being used. Create the enviornment variable FLEXLM_DIAGNOSTICS, assign it value 3 and invoke any of the tools: icc, ifort, amplxe-cl, inpxe-cl or idbc. For example:
Create the INTEL_LMD_DEBUG enviornment variable, assing it a log file name and invoke any of the tools: icc, ifort, amplxe-cl, or inspxe-cl. Search the logfile for any occurrence of the string SMSAxxxxxxxx. This 8-characters suffix is the serial number of the product that was used by invoking the product. For example:
Open an Intel Software Development Product command prompt from the Start menu, create the INTEL_LMD_DEBUG enviornment variable, assing it a log file name and invoke any of the tools: icl, ifort, amplxe-cl or inspxe-cl. Search the logfile for any occurrence of the string SMSAxxxxxxxx. This 8-characters suffix is the serial number of the product that was used by invoking the product. For example:
Mixed Windows/Linux/OS X license server/client environment
You can run a single license server to manage a combined license for different client operating systems. The license server can run on Windows, Linux or OS X. In a heterogeneous environment it may be required to specify the full license server name including the full primary DNS suffix or the IP address in the license files of the clients.
In order to have full functionality of floating licensing service it is strongly recommended to use a license manager version that is specified for use with your product (please refer to the 'System Requirements' in the product release notes). Incompatible Intel license manager versions may result in reduced functionality when updating products on your client machines; for example they may not detect existing product activations or allow product activation via license server.
If you encounter problems updating products try one of the following workarounds:
- Upgrade Intel® Software License Manager to the newest version available on the Intel® Registration Center (choose the right OS and platform; only users with floating license registrations have access to this link).
- Use serial number (alphanumeric code of format xxxx-xxxxxxxx)
- Use license file (file extension .lic).
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly, in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES, SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH, HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS' FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The information here is subject to change without notice. Do not finalize a design with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or by visiting Intel's Web Site.
Intel processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across different processor families. See http://www.intel.com/products/processor_number for details.
Intel, Intel Atom, and Intel Core are trademarks of Intel Corporation in the U.S. and/or other countries.
* Other names and brands may be claimed as the property of others.
Java is a registered trademark of Oracle and/or its affiliates.
Copyright © 2013, Intel Corporation. All rights reserved.