Computes selected eigenvalues and eigenvectors of a real symmetric tridiagonal matrix.
void sstegr2(char* jobz, char* range, MKL_INT* n, float* d, float* e, float* vl, float* vu, MKL_INT* il, MKL_INT* iu, MKL_INT* m, float* w, float* z, MKL_INT* ldz, MKL_INT* nzc, MKL_INT* isuppz, float* work, MKL_INT* lwork, MKL_INT* iwork, MKL_INT* liwork, MKL_INT* dol, MKL_INT* dou, MKL_INT* zoffset, MKL_INT* info);
void dstegr2(char* jobz, char* range, MKL_INT* n, double* d, double* e, double* vl, double* vu, MKL_INT* il, MKL_INT* iu, MKL_INT* m, double* w, double* z, MKL_INT* ldz, MKL_INT* nzc, MKL_INT* isuppz, double* work, MKL_INT* lwork, MKL_INT* iwork, MKL_INT* liwork, MKL_INT* dol, MKL_INT* dou, MKL_INT* zoffset, MKL_INT* info);
?stegr2 computes selected eigenvalues and, optionally, eigenvectors of a real symmetric tridiagonal matrix T. It is invoked in the ScaLAPACK MRRR driver p?syevr and the corresponding Hermitian version either when only eigenvalues are to be computed, or when only a single processor is used (the sequential-like case).
?stegr2 has been adapted from LAPACK's ?stegr. Please note the following crucial changes.
The calling sequence has two additional integer parameters, dol and dou, that should satisfy m≥dou≥dol≥1. ?stegr2only computes the eigenpairs corresponding to eigenvalues dol through dou in w, indexed dol-1 through dou-1. (That is, instead of computing the eigenpairs belonging to w through w[m-1], only the eigenvectors belonging to eigenvalues w[dol-1] through w[dou-1] are computed. In this case, only the eigenvalues dol through dou are guaranteed to be fully accurate.
m is not the number of eigenvalues specified by range, but is m = dou - dol + 1. This concerns the case where only eigenvalues are computed, but on more than one processor. Thus, in this case m refers to the number of eigenvalues computed on this processor.
The arrays w and z might not contain all the wanted eigenpairs locally, instead this information is distributed over other processors.
Intel's compilers may or may not optimize to the same degree for non-Intel microprocessors for optimizations that are not unique to Intel microprocessors. These optimizations include SSE2, SSE3, and SSSE3 instruction sets and other optimizations. Intel does not guarantee the availability, functionality, or effectiveness of any optimization on microprocessors not manufactured by Intel. Microprocessor-dependent optimizations in this product are intended for use with Intel microprocessors. Certain optimizations not specific to Intel microarchitecture are reserved for Intel microprocessors. Please refer to the applicable product User and Reference Guides for more information regarding the specific instruction sets covered by this notice.
Notice revision #20110804
= 'N': Compute eigenvalues only;
= 'V': Compute eigenvalues and eigenvectors.
= 'A': all eigenvalues will be found.
= 'V': all eigenvalues in the half-open interval (vl,vu] will be found.
= 'I': eigenvalues of the entire matrix with the indices in a given range will be found.
The order of the matrix. n≥ 0.
Array of size n
On entry, the n diagonal elements of the tridiagonal matrix T. Overwritten on exit.
Array of size n
On entry, the (n-1) subdiagonal elements of the tridiagonal matrix T in elements 0 to n-2 of e. e[n-1] need not be set on input, but is used internally as workspace. Overwritten on exit.
If range='V', the lower and upper bounds of the interval to be searched for eigenvalues. vl < vu.
Not referenced if range = 'A' or 'I'.
- il, iu
If range='I', the indices (in ascending order) of the smallest eigenvalue, to be returned in w[il-1], and largest eigenvalue, to be returned in w[iu-1].
1 ≤il≤iu≤n, if n > 0.
Not referenced if range = 'A' or 'V'.
The leading dimension of the array z. ldz≥ 1, and if jobz = 'V', then ldz≥ max(1,n).
The number of eigenvectors to be held in the array z, storing the matrix Z.
If range = 'A', then nzc≥ max(1,n).
If range = 'V', then nzc≥ the number of eigenvalues in (vl,vu].
If range = 'I', then nzc≥iu-il+1.
If nzc = -1, then a workspace query is assumed; the function calculates the number of columns of the matrix Z that are needed to hold the eigenvectors. This value is returned as the first entry of the z array, and no error message related to nzc is issued.
The size of the array work. lwork≥ max(1,18*n)
if jobz = 'V', and lwork≥ max(1,12*n) if jobz = 'N'. If lwork = -1, then a workspace query is assumed; the function only calculates the optimal size of the work array, returns this value as the first entry of the work array, and no error message related to lwork is issued.
The size of the array iwork. liwork≥ max(1,10*n) if the eigenvectors are desired, and liwork≥ max(1,8*n) if only the eigenvalues are to be computed.
If liwork = -1, then a workspace query is assumed; the function only calculates the optimal size of the iwork array, returns this value as the first entry of the iwork array, and no error message related to liwork is issued.
- dol, dou
From the eigenvalues w through w[m-1], only eigenvectors Z(:,dol) to Z(:,dou) are computed.
If dol > 1, then Z(:,dol-1-zoffset) is used and overwritten.
If dou < m, then Z(:,dou+1-zoffset) is used and overwritten.
Offset for storing the eigenpairs when z is distributed in 1D-cyclic fashion
Globally summed over all processors, m equals the total number of eigenvalues found. 0 ≤m≤n. If range = 'A', m = n, and if range = 'I', m = iu-il+1. The local output equals m = dou - dol + 1.
Array of size n
The first m elements contain the selected eigenvalues in ascending order. Note that immediately after exiting this function, only the eigenvalues indexed dol-1 through dou-1 are reliable on this processor because the eigenvalue computation is done in parallel. Other processors will hold reliable information on other parts of the w array. This information is communicated in the ScaLAPACK driver.
Array of size ldz * max(1,m).
If jobz = 'V', and if info = 0, then the first m columns of the matrix Z stored in z contain some of the orthonormal eigenvectors of the matrix T corresponding to the selected eigenvalues, with the i-th column of Z holding the eigenvector associated with w[i-1].
If jobz = 'N', then z is not referenced.
Note: the user must ensure that at least max(1,m) columns of the matrix are supplied in the array z; if range = 'V', the exact value of m is not known in advance and can be computed with a workspace query by setting nzc = -1, see below.
array of size 2*max(1,m)
The support of the eigenvectors in z, i.e., the indices indicating the nonzero elements in z. The i-th computed eigenvector is nonzero only in elements isuppz[ 2*i-2 ] through isuppz[ 2*i -1]. This is relevant in the case when the matrix is split. isuppz is only set if n>2.
On exit, if info = 0, work returns the optimal (and minimal) lwork.
On exit, if info = 0, iwork returns the optimal liwork.
On exit, info
= 0: successful exit
other:if info = -i, the i-th argument had an illegal value
if info = 10X, internal error in ?larre2,
if info = 20X, internal error in ?larrv.
Here, the digit X = ABS( iinfo ) < 10, where iinfo is the nonzero error code returned by ?larre2 or ?larrv, respectively.