Фильтры

Документация

Step 1: Make a bootable micro SD card в Getting Started with the Intel® Galileo Board on Mac* OS X

You must boot your Intel® Galileo board using a micro SD card that contains the latest Intel® IoT Developer Kit version of the Yocto*-built Linux image.

Последнее обновление: 10.07.2018 - 08:00
Документация

Step 2: Assemble and power your board в Getting Started with the Intel® Galileo Board on Mac* OS X

This section walks you through assembling your Intel® Galileo board. Start with one of the following options:

Последнее обновление: 10.07.2018 - 08:00
Документация

Step 3: Set up a serial terminal в Getting Started with the Intel® Galileo Board on Mac* OS X

This page describes how to set up a terminal emulator on a Mac system to use with the Intel® Galileo board.

Последнее обновление: 10.07.2018 - 08:00
Документация

Step 4: Connect over Wi-Fi* в Getting Started with the Intel® Galileo Board on Mac* OS X

Последнее обновление: 10.07.2018 - 08:00
Документация

Step 5: Set up your IDE в Getting Started with the Intel® Galileo Board on Mac* OS X

Now that you have set up your Intel® Galileo board, you can install your preferred integrated development environment (IDE) and begin programming your board.

Последнее обновление: 10.07.2018 - 08:00
Article

Updating Firmware for Arduino* on a System with OS X* or Linux*

These instructions are for installing drivers and updating firmware for an Intel® Galileo board with Arduino on a system with OS X* or Linux*.
Автор: админ Последнее обновление: 16.08.2019 - 11:57
Документация