Class AMT_TLSProtocolEndpoint
Used in features: Security
Administration
Compatible with the following Intel AMT Releases: 3.0,
3.2, 4.0, 5.0, 5.1, 6.0, 6.1, 6.2, 7.0, 8.0, 8.1, 9.0, 9.5, 10.0, 11.0
CIM_ManagedElement
CIM_ManagedSystemElement
CIM_LogicalElement
CIM_EnabledLogicalElement
CIM_ServiceAccessPoint
CIM_ProtocolEndpoint
AMT_TLSProtocolEndpoint
class AMT_TLSProtocolEndpoint
- extends CIM_ProtocolEndpoint
General Information:
A communication point from which data may be
sent or received. ProtocolEndpoints link system/computer interfaces to
LogicalNetworks.
Product Specific Usage:
This class cannot be
used in order to enable/disable TLS. the AMT_TLSProtoclEndpointCollection
instance should be
used.
Qualifiers:
-------------
Version=3.0.0
Supported Fields
Summary |
string
|
OtherTypeDescription
A string that describes the type of ProtocolEndpoint when the
Type property of this class (or any of its subclasses) is set to 1 (Other)
. . .
|
uint16
|
ProtocolIFType
ProtocolIFType is an enumeration that is synchronized with the
IANA ifType MIB . . .
|
string
|
Name A string that identifies this ProtocolEndpoint
with either a port or an interface on a device . . .
|
uint16
|
EnabledState
|
uint16
|
RequestedState
RequestedState is an integer enumeration that indicates the
last requested or desired state for the element, irrespective of the
mechanism through which it was requested . . .
|
string
|
ElementName A
user-friendly name for the object . . .
|
string
|
SystemCreationClassName The CreationClassName of the scoping
System.
|
string
|
SystemName The Name of the scoping System.
|
string
|
CreationClassName CreationClassName indicates the name
of the class or the subclass used in the creation of an instance . .
.
|
uint8
|
Role Describes what role
the endpoint is playing in TLS exchanges.
|
Methods Summary |
|
Get(Instance) Gets the
representation of the instance
|
|
Pull(EnumerationContext,
MaxElements) Pulls instances of this class, following an
Enumerate operation
|
|
Enumerate()
Enumerates the instances of this class
|
|
Release(EnumerationContext)
Releases an enumeration context
|
OtherTypeDescription
public string OtherTypeDescription
- General Information:
A string that describes the type of
ProtocolEndpoint when the Type property of this class (or any of its
subclasses) is set to 1 (Other). This property should be set to null when the
Type property is any value other than 1.
Product Specific
Usage:
In Intel AMT Release 6.0 and later releases value is
"TLS"
Qualifiers:
-------------
MaxLen=5
ModelCorrespondence={CIM_ProtocolEndpoint.ProtocolType,
CIM_ProtocolEndpoint.ProtocolIFType}
ProtocolIFType
public uint16 ProtocolIFType
- General Information:
ProtocolIFType is an enumeration that is
synchronized with the IANA ifType MIB. The ifType MIB is maintained at the
URL, http://www.iana.org/assignments/ianaiftype-mib. Also, additional values
defined by the DMTF are included. The property is used to categorize and
classify instances of the ProtocolEndpoint class. Note that if the
ProtocolIFType is set to 1 (Other), then the type information should be
provided in the OtherTypeDescription string property.
Product
Specific Usage:
In Intel AMT Release 6.0 and later releases value is 1
("Other")
Qualifiers:
-------------
ValueMap={0, 1, 2, 3,
4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43,
44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62,
63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81,
82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100,
101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115,
116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130,
131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145,
146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160,
161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175,
176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190,
191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205,
206, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220,
221, 222, 223, 224, 225..4095, 4096, 4097, 4098, 4099, 4100, 4101, 4102, 4103,
4104, 4105, 4106, 4107, 4108, 4109, 4110, 4111, 4112, 4113, 4114, 4115, 4200,
4201, 4202, 4203, 4204, 4205, 4300, 4400, 4401, 4402, 4403, 4404, 4405, 4406,
.., 32768..}
Values={Unknown, Other, Regular 1822, HDH 1822, DDN X.25,
RFC877 X.25, Ethernet CSMA/CD, ISO 802.3 CSMA/CD, ISO 802.4 Token Bus, ISO
802.5 Token Ring, ISO 802.6 MAN, StarLAN, Proteon 10Mbit, Proteon 80Mbit,
HyperChannel, FDDI, LAP-B, SDLC, DS1, E1, Basic ISDN, Primary ISDN,
Proprietary Point-to-Point Serial, PPP, Software Loopback, EON, Ethernet
3Mbit, NSIP, SLIP, Ultra, DS3, SIP, Frame Relay, RS-232, Parallel, ARCNet,
ARCNet Plus, ATM, MIO X.25, SONET, X.25 PLE, ISO 802.211c, LocalTalk, SMDS
DXI, Frame Relay Service, V.35, HSSI, HIPPI, Modem, AAL5, SONET Path, SONET
VT, SMDS ICIP, Proprietary Virtual/Internal, Proprietary Multiplexor, IEEE
802.12, Fibre Channel, HIPPI Interface, Frame Relay Interconnect, ATM Emulated
LAN for 802.3, ATM Emulated LAN for 802.5, ATM Emulated Circuit, Fast Ethernet
(100BaseT), ISDN, V.11, V.36, G703 at 64K, G703 at 2Mb, QLLC, Fast Ethernet
100BaseFX, Channel, IEEE 802.11, IBM 260/370 OEMI Channel, ESCON, Data Link
Switching, ISDN S/T Interface, ISDN U Interface, LAP-D, IP Switch, Remote
Source Route Bridging, ATM Logical, DS0, DS0 Bundle, BSC, Async, Combat Net
Radio, ISO 802.5r DTR, Ext Pos Loc Report System, AppleTalk Remote Access
Protocol, Proprietary Connectionless, ITU X.29 Host PAD, ITU X.3 Terminal PAD,
Frame Relay MPI, ITU X.213, ADSL, RADSL, SDSL, VDSL, ISO 802.5 CRFP, Myrinet,
Voice Receive and Transmit, Voice Foreign Exchange Office, Voice Foreign
Exchange Service, Voice Encapsulation, Voice over IP, ATM DXI, ATM FUNI, ATM
IMA, PPP Multilink Bundle, IP over CDLC, IP over CLAW, Stack to Stack, Virtual
IP Address, MPC, IP over ATM, ISO 802.5j Fibre Token Ring, TDLC, Gigabit
Ethernet, HDLC, LAP-F, V.37, X.25 MLP, X.25 Hunt Group, Transp HDLC,
Interleave Channel, FAST Channel, IP (for APPN HPR in IP Networks), CATV MAC
Layer, CATV Downstream, CATV Upstream, Avalon 12MPP Switch, Tunnel, Coffee,
Circuit Emulation Service, ATM SubInterface, Layer 2 VLAN using 802.1Q, Layer
3 VLAN using IP, Layer 3 VLAN using IPX, Digital Power Line, Multimedia Mail
over IP, DTM, DCN, IP Forwarding, MSDSL, IEEE 1394, IF-GSN/HIPPI-6400, DVB-RCC
MAC Layer, DVB-RCC Downstream, DVB-RCC Upstream, ATM Virtual, MPLS Tunnel,
SRP, Voice over ATM, Voice over Frame Relay, ISDL, Composite Link, SS7
Signaling Link, Proprietary P2P Wireless, Frame Forward, RFC1483 Multiprotocol
over ATM, USB, IEEE 802.3ad Link Aggregate, BGP Policy Accounting, FRF .16
Multilink FR, H.323 Gatekeeper, H.323 Proxy, MPLS, Multi-Frequency Signaling
Link, HDSL-2, S-HDSL, DS1 Facility Data Link, Packet over SONET/SDH, DVB-ASI
Input, DVB-ASI Output, Power Line, Non Facility Associated Signaling, TR008,
GR303 RDT, GR303 IDT, ISUP, Proprietary Wireless MAC Layer, Proprietary
Wireless Downstream, Proprietary Wireless Upstream, HIPERLAN Type 2,
Proprietary Broadband Wireless Access Point to Mulipoint, SONET Overhead
Channel, Digital Wrapper Overhead Channel, ATM Adaptation Layer 2, Radio MAC,
ATM Radio, Inter Machine Trunk, MVL DSL, Long Read DSL, Frame Relay DLCI
Endpoint, ATM VCI Endpoint, Optical Channel, Optical Transport, Proprietary
ATM, Voice over Cable, Infiniband, TE Link, Q.2931, Virtual Trunk Group, SIP
Trunk Group, SIP Signaling, CATV Upstream Channel, Econet, FSAN 155Mb PON,
FSAN 622Mb PON, Transparent Bridge, Line Group, Voice E&M Feature Group,
Voice FGD EANA, Voice DID, MPEG Transport, 6To4, GTP, Paradyne EtherLoop 1,
Paradyne EtherLoop 2, Optical Channel Group, HomePNA, GFP, ciscoISLvlan,
actelisMetaLOOP, Fcip, IANA Reserved, IPv4, IPv6, IPv4/v6, IPX, DECnet, SNA,
CONP, CLNP, VINES, XNS, ISDN B Channel Endpoint, ISDN D Channel Endpoint, BGP,
OSPF, UDP, TCP, 802.11a, 802.11b, 802.11g, 802.11h, NFS, CIFS, DAFS, WebDAV,
HTTP, FTP, NDMP, Telnet, SSH, SM CLP, SMTP, LDAP, RDP, HTTPS, DMTF Reserved,
Vendor
Reserved}
MappingStrings={MIB.IETF|IF-MIB.ifType}
ModelCorrespondence={CIM_ProtocolEndpoint.OtherTypeDescription}
Name
public string Name
- General Information:
A string that identifies this
ProtocolEndpoint with either a port or an interface on a device. To ensure
uniqueness, the Name property should be prepended or appended with information
from the Type or OtherTypeDescription properties. The method selected is
described in the NameFormat property of this
class.
Qualifiers:
-------------
Override=Name
MaxLen=45
EnabledState
public uint16 EnabledState
- General
Information:
Qualifiers:
-------------
Override=EnabledState
MappingStrings={MIB.IETF|IF-MIB.ifAdminStatus}
RequestedState
public uint16 RequestedState
- General Information:
RequestedState is an integer enumeration
that indicates the last requested or desired state for the element,
irrespective of the mechanism through which it was requested. The actual state
of the element is represented by EnabledState. This property is provided to
compare the last requested and current enabled or disabled states. Note that
when EnabledState is set to 5 ("Not Applicable"), then this property has no
meaning. Refer to the EnabledState property description for explanations of
the values in the RequestedState enumeration.
"Unknown" (0) indicates the
last requested state for the element is unknown.
Note that the value "No
Change" (5) has been deprecated in lieu of indicating the last requested state
is "Unknown" (0). If the last requested or desired state is unknown,
RequestedState should have the value "Unknown" (0), but may have the value "No
Change" (5).Offline (6) indicates that the element has been requested to
transition to the Enabled but Offline EnabledState.
It should be noted
that there are two new values in RequestedState that build on the statuses of
EnabledState. These are "Reboot" (10) and "Reset" (11). Reboot refers to doing
a "Shut Down" and then moving to an "Enabled" state. Reset indicates that the
element is first "Disabled" and then "Enabled". The distinction between
requesting "Shut Down" and "Disabled" should also be noted. Shut Down requests
an orderly transition to the Disabled state, and might involve removing power,
to completely erase any existing state. The Disabled state requests an
immediate disabling of the element, such that it will not execute or accept
any commands or processing requests.
This property is set as the
result of a method invocation (such as Start or StopService on CIM_Service),
or can be overridden and defined as WRITEable in a subclass. The method
approach is considered superior to a WRITEable property, because it allows an
explicit invocation of the operation and the return of a result code.
If knowledge of the last RequestedState is not supported for the
EnabledLogicalElement, the property shall be NULL or have the value 12 "Not
Applicable".
Qualifiers:
-------------
ValueMap={0, 2, 3,
4, 5, 6, 7, 8, 9, 10, 11, 12, .., 32768..65535}
Values={Unknown, Enabled,
Disabled, Shut Down, No Change, Offline, Test, Deferred, Quiesce, Reboot,
Reset, Not Applicable, DMTF Reserved, Vendor
Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.EnabledState}
ElementName
public string ElementName
- General Information:
A user-friendly name for the object. This
property allows each instance to define a user-friendly name in addition to
its key properties, identity data, and description information.
Note that
the Name property of ManagedSystemElement is also defined as a user-friendly
name. But, it is often subclassed to be a Key. It is not reasonable that the
same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in both the Name and
ElementName properties. Note that if there is an associated instance of
CIM_EnabledLogicalElementCapabilities, restrictions on this properties may
exist as defined in ElementNameMask and MaxElementNameLen properties defined
in that class.
Product Specific Usage:
In Intel AMT Release
6.0 and later releases value is "Intel(r) AMT TLS Protocol
Endpoint"
Qualifiers:
-------------
MaxLen=35
SystemCreationClassName
public string SystemCreationClassName
- General Information:
The CreationClassName of the scoping
System.
Product Specific Usage:
In Intel AMT Release 6.0 and
later releases value is
"CIM_ComputerSystem"
Qualifiers:
-------------
Key
MaxLen=20
Propagated=CIM_System.CreationClassName
SystemName
public string SystemName
- General Information:
The Name of the scoping
System.
Product Specific Usage:
In Intel AMT Release 6.0 and
later releases value is "Intel(r)
AMT"
Qualifiers:
-------------
Key
MaxLen=15
Propagated=CIM_System.Name
CreationClassName
public string CreationClassName
- General Information:
CreationClassName indicates the name of the
class or the subclass used in the creation of an instance. When used with the
other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely identified.
Product Specific
Usage:
In Intel AMT Release 6.0 and later releases value is
"AMT_TLSProtocolEndpoint"
Qualifiers:
-------------
Key
MaxLen=25
Role
public uint8 Role
- General Information:
Describes what role the endpoint is playing
in TLS exchanges.
Qualifiers:
-------------
ValueMap={0,
1}
Values={Server, Client}
Get
public Get([OUT]AMT_TLSProtocolEndpoint Instance)
- Permission Information:
Permitted realms:
ADMIN_SECURITY_ADMINISTRATION_REALM,
ADMIN_SECURITY_GENERAL_INFO_REALM
General Information:
Gets
the representation of the instance
Pull
public Pull([IN]String EnumerationContext, [IN]String MaxElements)
- Permission Information:
All users permitted to use method, only
instances to whom the user has permissions will be returned
General
Information:
Pulls instances of this class, following an Enumerate
operation
Enumerate
public Enumerate()
- Permission Information:
All users permitted to use
method
General Information:
Enumerates the instances of this
class
Release
public Release([IN]String EnumerationContext)
- Permission Information:
All users permitted to use
method
General Information:
Releases an enumeration
context