Specific Trap Info

Event Sensor Type

26h (MNG subsystem health)

Event Type

01h (Generic)

Event Offset

00h

Variable Binding Info

Event Source Type

58h (System MNG card)

Event Severity

10h (Critical)

Sensor Device

FFh (NS)

Sensor Number

FFh (NS)

Entity

26h (Remote (Out of Band) Management Communication Device)

Entity Instance

00h (NS)

EventData[1...8]

AAh (Event Data bytes 2-5 valid),
 NN (Update status),
NN (Update status),
NN (Update status),
NN (Update status)

2

Status

0-3

Status of last execution:

2          Success: The firmware loader has finished loading all fragments of the new image. No errors occurred.

3          Partial completion, actual step is spelled out in the status indication.

4          Failure, no change in loadable flash area.

2

Changed flash

4

When set to 1 the flash device was changed by the firmware update.

2

Active application update

5-6

Active application update:

00 = no update.
10 = application A
11 = application B

For Intel AMT Release 2.0 and on, this value should be 0b11.

2

Reserved

7

Reserved

3

Reserved

0-7

Reserved

4

Failure reason

0-3

If there is a failure, 7 (failed to update image) is the only valid value (Release 2.0 only)

4

Failure sub-reason

4-7

0          Update rejected – Sku failure.

1          Update rejected – Version failure.

2          Update rejected – Signature Failure.

3          Update rejected – General Failure.

4          Update failure – Code partition invalid.

5          Update failure – Recovery partition invalid.

5

Reserved

0-7

Reserved