Class CIM_EthernetPort
Used in features: Network Administration ,
System Defense & Heuristics , Endpoint Access Control , Wireless
Compatible with the following Intel AMT Releases: 3.0, 3.2, 4.0, 5.0,
5.1, 6.0, 6.1, 6.2, 7.0, 8.0, 8.1, 9.0, 9.5, 10.0, 11.0
CIM_ManagedElement
CIM_ManagedSystemElement
CIM_LogicalElement
CIM_EnabledLogicalElement
CIM_LogicalDevice
CIM_LogicalPort
CIM_NetworkPort
CIM_EthernetPort
class CIM_EthernetPort
- extends CIM_NetworkPort
General Information:
Capabilities and management of an
EthernetPort.
Qualifiers:
-------------
Version=2.10.0
UMLPackagePath=CIM::Device::Ports
Supported Fields
Summary |
uint16
|
LinkTechnology
An enumeration of the types of links . . .
|
uint64
|
Speed The current
bandwidth of the Port in Bits per Second . . .
|
string
|
DeviceID An address or other identifying information to
uniquely name the LogicalDevice.
|
string
|
CreationClassName CreationClassName indicates the name
of the class or the subclass used in the creation of an instance . .
.
|
string
|
SystemName The scoping System's Name.
|
string
|
SystemCreationClassName The scoping System's
CreationClassName.
|
string
|
ElementName A
user-friendly name for the object . . .
|
string
|
Description The
Description property provides a textual description of the object.
|
uint16[]
|
OperationalStatus
Indicates the current statuses of the element . . .
|
uint16
|
EnabledState
EnabledState is an integer enumeration that indicates the
enabled and disabled states of an element . . .
|
uint16
|
RequestedState
RequestedState is an integer enumeration that indicates the
last requested or desired state for the element, irrespective of the
mechanism through which it was requested . . .
|
uint16
|
EnabledDefault
An enumerated value indicating an administrator's default or
startup configuration for the Enabled State of an element . . .
|
uint64
|
MaxSpeed The maximum
bandwidth of the Port in Bits per Second.
|
uint16
|
PortType The specific
mode that is currently enabled for the Port . . .
|
string[]
|
NetworkAddresses
Ethernet/802.3 MAC addresses formatted as twelve hexadecimal
digits (for example, "010203040506"), with each pair representing one of
the six octets of the MAC address in "canonical" bit order . .
.
|
Methods Summary |
|
Get(Instance) Gets the
representation of the instance
|
|
Pull(EnumerationContext,
MaxElements) Pulls instances of this class, following an
Enumerate operation
|
|
Enumerate()
Enumerates the instances of this class
|
|
Release(EnumerationContext)
Releases an enumeration context
|
LinkTechnology
public uint16 LinkTechnology
- General Information:
An enumeration of the types of links. When
set to 1 ("Other"), the related property OtherLinkTechnology contains a string
description of the type of
link.
Qualifiers:
-------------
ValueMap={0, 1, 2, 3, 4,
5, 6, 7, 8, 9, 10, 11}
Values={Unknown, Other, Ethernet, IB, FC, FDDI, ATM,
Token Ring, Frame Relay, Infrared, BlueTooth, Wireless
LAN}
ModelCorrespondence={CIM_NetworkPort.OtherLinkTechnology}
Speed
public uint64 Speed
- General Information:
The current bandwidth of the Port in Bits
per Second. For ports that vary in bandwidth or for those where no accurate
estimation can be made, this property should contain the nominal
bandwidth.
Qualifiers:
-------------
Override=Speed
Units=Bits
per Second
MappingStrings={MIB.IETF|MIB-II.ifSpeed, MIF.DMTF|Network
Adapter 802 Port|001.5}
PUnit=bit / second
DeviceID
public string DeviceID
- General Information:
An address or other identifying information
to uniquely name the
LogicalDevice.
Qualifiers:
-------------
Key
MaxLen=64
CreationClassName
public string CreationClassName
- General Information:
CreationClassName indicates the name of the
class or the subclass used in the creation of an instance. When used with the
other key properties of this class, this property allows all instances of this
class and its subclasses to be uniquely
identified.
Qualifiers:
-------------
Key
MaxLen=20
SystemName
public string SystemName
- General Information:
The scoping System's
Name.
Qualifiers:
-------------
Key
MaxLen=30
Propagated=CIM_System.Name
SystemCreationClassName
public string SystemCreationClassName
- General Information:
The scoping System's
CreationClassName.
Qualifiers:
-------------
Key
MaxLen=18
Propagated=CIM_System.CreationClassName
ElementName
public string ElementName
- General Information:
A user-friendly name for the object. This
property allows each instance to define a user-friendly name in addition to
its key properties, identity data, and description information.
Note that
the Name property of ManagedSystemElement is also defined as a user-friendly
name. But, it is often subclassed to be a Key. It is not reasonable that the
same property can convey both identity and a user-friendly name, without
inconsistencies. Where Name exists and is not a Key (such as for instances of
LogicalDevice), the same information can be present in both the Name and
ElementName properties. Note that if there is an associated instance of
CIM_EnabledLogicalElementCapabilities, restrictions on this properties may
exist as defined in ElementNameMask and MaxElementNameLen properties defined
in that class.
Qualifiers:
-------------
MaxLen=30
Description
public string Description
- General Information:
The Description property provides a textual
description of the
object.
Qualifiers:
-------------
MaxLen=256
OperationalStatus
public uint16[] OperationalStatus
- General Information:
Indicates the current statuses of the
element. Various operational statuses are defined. Many of the enumeration's
values are self-explanatory. However, a few are not and are described here in
more detail.
"Stressed" indicates that the element is functioning, but
needs attention. Examples of "Stressed" states are overload, overheated, and
so on.
"Predictive Failure" indicates that an element is functioning
nominally but predicting a failure in the near future.
"In Service"
describes an element being configured, maintained, cleaned, or otherwise
administered.
"No Contact" indicates that the monitoring system has
knowledge of this element, but has never been able to establish communications
with it.
"Lost Communication" indicates that the ManagedSystem Element is
known to exist and has been contacted successfully in the past, but is
currently unreachable.
"Stopped" and "Aborted" are similar, although the
former implies a clean and orderly stop, while the latter implies an abrupt
stop where the state and configuration of the element might need to be
updated.
"Dormant" indicates that the element is inactive or quiesced.
"Supporting Entity in Error" indicates that this element might be "OK" but
that another element, on which it is dependent, is in error. An example is a
network service or endpoint that cannot function due to lower-layer networking
problems.
"Completed" indicates that the element has completed its
operation. This value should be combined with either OK, Error, or Degraded so
that a client can tell if the complete operation Completed with OK (passed),
Completed with Error (failed), or Completed with Degraded (the operation
finished, but it did not complete OK or did not report an error).
"Power
Mode" indicates that the element has additional power model information
contained in the Associated PowerManagementService association.
"Relocating" indicates the element is being
relocated.
OperationalStatus replaces the Status property on
ManagedSystemElement to provide a consistent approach to enumerations, to
address implementation needs for an array property, and to provide a migration
path from today's environment to the future. This change was not made earlier
because it required the deprecated qualifier. Due to the widespread use of the
existing Status property in management applications, it is strongly
recommended that providers or instrumentation provide both the Status and
OperationalStatus properties. Further, the first value of OperationalStatus
should contain the primary status for the element. When instrumented, Status
(because it is single-valued) should also provide the primary status of the
element.
Qualifiers:
-------------
ValueMap={0, 1, 2, 3,
4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, ..,
0x8000..}
Values={Unknown, Other, OK, Degraded, Stressed, Predictive
Failure, Error, Non-Recoverable Error, Starting, Stopping, Stopped, In
Service, No Contact, Lost Communication, Aborted, Dormant, Supporting Entity
in Error, Completed, Power Mode, Relocating, DMTF Reserved, Vendor
Reserved}
ArrayType=Indexed
ModelCorrespondence={CIM_ManagedSystemElement.StatusDescriptions}
EnabledState
public uint16 EnabledState
- General Information:
EnabledState is an integer enumeration that
indicates the enabled and disabled states of an element. It can also indicate
the transitions between these requested states. For example, shutting down
(value=4) and starting (value=10) are transient states between enabled and
disabled. The following text briefly summarizes the various enabled and
disabled states:
Enabled (2) indicates that the element is or could be
executing commands, will process any queued commands, and queues new requests.
Disabled (3) indicates that the element will not execute commands and will
drop any new requests.
Shutting Down (4) indicates that the element is in
the process of going to a Disabled state.
Not Applicable (5) indicates the
element does not support being enabled or disabled.
Enabled but Offline
(6) indicates that the element might be completing commands, and will drop any
new requests.
Test (7) indicates that the element is in a test state.
Deferred (8) indicates that the element might be completing commands, but
will queue any new requests.
Quiesce (9) indicates that the element is
enabled but in a restricted mode.
Starting (10) indicates that the element
is in the process of going to an Enabled state. New requests are
queued.
Qualifiers:
-------------
ValueMap={0, 1, 2, 3, 4,
5, 6, 7, 8, 9, 10, 11..32767, 32768..65535}
Values={Unknown, Other,
Enabled, Disabled, Shutting Down, Not Applicable, Enabled but Offline, In
Test, Deferred, Quiesce, Starting, DMTF Reserved, Vendor
Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.OtherEnabledState}
RequestedState
public uint16 RequestedState
- General Information:
RequestedState is an integer enumeration
that indicates the last requested or desired state for the element,
irrespective of the mechanism through which it was requested. The actual state
of the element is represented by EnabledState. This property is provided to
compare the last requested and current enabled or disabled states. Note that
when EnabledState is set to 5 ("Not Applicable"), then this property has no
meaning. Refer to the EnabledState property description for explanations of
the values in the RequestedState enumeration.
"Unknown" (0) indicates the
last requested state for the element is unknown.
Note that the value "No
Change" (5) has been deprecated in lieu of indicating the last requested state
is "Unknown" (0). If the last requested or desired state is unknown,
RequestedState should have the value "Unknown" (0), but may have the value "No
Change" (5).Offline (6) indicates that the element has been requested to
transition to the Enabled but Offline EnabledState.
It should be noted
that there are two new values in RequestedState that build on the statuses of
EnabledState. These are "Reboot" (10) and "Reset" (11). Reboot refers to doing
a "Shut Down" and then moving to an "Enabled" state. Reset indicates that the
element is first "Disabled" and then "Enabled". The distinction between
requesting "Shut Down" and "Disabled" should also be noted. Shut Down requests
an orderly transition to the Disabled state, and might involve removing power,
to completely erase any existing state. The Disabled state requests an
immediate disabling of the element, such that it will not execute or accept
any commands or processing requests.
This property is set as the
result of a method invocation (such as Start or StopService on CIM_Service),
or can be overridden and defined as WRITEable in a subclass. The method
approach is considered superior to a WRITEable property, because it allows an
explicit invocation of the operation and the return of a result code.
If knowledge of the last RequestedState is not supported for the
EnabledLogicalElement, the property shall be NULL or have the value 12 "Not
Applicable".
Qualifiers:
-------------
ValueMap={0, 2, 3,
4, 5, 6, 7, 8, 9, 10, 11, 12, .., 32768..65535}
Values={Unknown, Enabled,
Disabled, Shut Down, No Change, Offline, Test, Deferred, Quiesce, Reboot,
Reset, Not Applicable, DMTF Reserved, Vendor
Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.EnabledState}
EnabledDefault
public uint16 EnabledDefault
- General Information:
An enumerated value indicating an
administrator's default or startup configuration for the Enabled State of an
element. By default, the element is "Enabled"
(value=2).
Qualifiers:
-------------
Write
ValueMap={2,
3, 5, 6, 7, 9, .., 32768..65535}
Values={Enabled, Disabled, Not Applicable,
Enabled but Offline, No Default, Quiesce, DMTF Reserved, Vendor
Reserved}
MaxSpeed
public uint64 MaxSpeed
- General Information:
The maximum bandwidth of the Port in Bits
per Second.
Qualifiers:
-------------
Units=Bits per
Second
PUnit=bit / second
PortType
public uint16 PortType
- General Information:
The specific mode that is currently enabled
for the Port. When set to 1 ("Other"), the related property OtherPortType
contains a string description of the type of
port.
Qualifiers:
-------------
Override=PortType
ValueMap={0,
1, 50, 51, 52, 53, 54, 55, 56, 100, 101, 102, 103, 104, 105, 106, 107, 108,
109, 110, 111, 16000..65535}
Values={Unknown, Other, 10BaseT, 10-100BaseT,
100BaseT, 1000BaseT, 2500BaseT, 10GBaseT, 10GBase-CX4, 100Base-FX, 100Base-SX,
1000Base-SX, 1000Base-LX, 1000Base-CX, 10GBase-SR, 10GBase-SW, 10GBase-LX4,
10GBase-LR, 10GBase-LW, 10GBase-ER, 10GBase-EW, Vendor Reserved}
NetworkAddresses
public string[] NetworkAddresses
- General Information:
Ethernet/802.3 MAC addresses formatted as
twelve hexadecimal digits (for example, "010203040506"), with each pair
representing one of the six octets of the MAC address in "canonical" bit
order. (Therefore, the Group address bit is found in the low order bit of the
first character of the
string.)
Qualifiers:
-------------
Override=NetworkAddresses
MaxLen=256
Get
public Get([OUT]CIM_EthernetPort Instance)
- Permission Information:
Permitted realms:
ADMIN_SECURITY_ADMINISTRATION_REALM, ADMIN_SECURITY_GENERAL_INFO_REALM,
ADMIN_SECURITY_CIRCUIT_BREAKER_REALM,
ADMIN_SECURITY_AGENT_PRESENCE_REMOTE_REALM,
ADMIN_SECURITY_AGENT_PRESENCE_LOCAL_REALM
General
Information:
Gets the representation of the instance
Pull
public Pull([IN]String EnumerationContext, [IN]String MaxElements)
- Permission Information:
All users permitted to use method, only
instances to whom the user has permissions will be returned
General
Information:
Pulls instances of this class, following an Enumerate
operation
Enumerate
public Enumerate()
- Permission Information:
All users permitted to use
method
General Information:
Enumerates the instances of this
class
Release
public Release([IN]String EnumerationContext)
- Permission Information:
All users permitted to use
method
General Information:
Releases an enumeration
context