SUMMARY: NESTED | FIELD | | METHOD
DETAIL: FIELD | METHOD

Class CIM_RedirectionService

Used in features: KVM
Compatible with the following Intel AMT Releases: 6.0, 6.1, 6.2, 7.0, 8.0, 8.1, 9.0, 9.5, 10.0, 11.0 
CIM_ManagedElement
   extended by CIM_ManagedSystemElement
      extended by CIM_LogicalElement
         extended by CIM_EnabledLogicalElement
            extended by CIM_Service
               extended by CIM_RedirectionService


class CIM_RedirectionService
 extends CIM_Service


General Information:
RedirectionService provides the capability to 
manage redirection services. Examples of this include any video stream directed 
to a Network Port (by the operating system) on a Computer System redirected out 
to a remote administrator's console. Similarly this can include input redirected 
into the same Network Port. Other examples include the redirection of IO from a 
logical element to a remote or local destination. Each redirection stream is 
accessible via a SAP. This service can support multiple redirection types via 
multiple associated SAPs.

Product Specific Usage:
The class 
implementation is required by DSP1076 (KVM Redirection Profile) and it uses to 
represent the KVM service of Intel (r) AMT. 



Qualifiers:
-------------
Version=2.17.0
UMLPackagePath=CIM::Network::ConsoleProtocols









  
  

    Supported Fields 
      Summary

  

     string 
      
    Name Key  
The Name property uniquely identifies the 
      Service and provides an indication of the functionality that is managed . 
      . .

  

     string 
      
    CreationClassName Key  
CreationClassName indicates the name 
      of the class or the subclass that is used in the creation of an instance . 
      . .

  

     string 
      
    SystemName Key  
The Name of the scoping System.

  

     string 
      
    SystemCreationClassName Key  
The CreationClassName of the scoping 
      System.

  

     string 
      
    ElementName 
A 
      user-friendly name for the object . . .

  

     uint16 
      
    EnabledState 
      
EnabledState is an integer enumeration that indicates the 
      enabled and disabled states of an element . . .

  

     uint16 
      
    RequestedState 
      
RequestedState is an integer enumeration that indicates the 
      last requested or desired state for the element, irrespective of the 
      mechanism through which it was requested . . .

  

     uint16[] 
      
    RedirectionServiceType 
      
An enumerated array indicating the type(s) of Redirection 
      supported by this Service . . .

  

     uint16 
      
    MaxCurrentEnabledSAPs 
      
Maximum number of concurrently enabled redirection SAPs . . 
      .

  

     uint16 
      
    SharingMode 
An 
      enumeration specifying the impact of enabling the redirection of the text 
      console flow on the original destination of the flow . . 
  .




  
  

    Methods Summary

  

     uint32
    RequestStateChange(RequestedState, REF 
      Job, TimeoutPeriod) 
Requests that the state of the element be 
      changed to the value specified in the RequestedState parameter . . 
.

  

     
    Get(Instance) 
Gets the 
      representation of the instance

  

     
    Pull(EnumerationContext, 
      MaxElements) 
Pulls instances of this class, following an 
      Enumerate operation

  

     
    Enumerate() 
      
Enumerates the instances of this class

  

     
    Release(EnumerationContext) 
      
Releases an enumeration context




  
  

    Field 
Detail


Name Key 
public string Name



  
General Information:
The Name property uniquely identifies the 
  Service and provides an indication of the functionality that is managed. This 
  functionality is described in more detail in the Description property of the 
  object.

Product Specific Usage:
In Intel AMT Release 6.0 and 
  later releases value is "Intel(r) AMT KVM Redirection 
  Service"

Qualifiers:
-------------
Key
Override=Name
MaxLen=40


  

  





CreationClassName Key 
public string CreationClassName



  
General Information:
CreationClassName indicates the name of the 
  class or the subclass that is used in the creation of an instance. When used 
  with the other key properties of this class, this property allows all 
  instances of this class and its subclasses to be uniquely 
  identified.

Product Specific Usage:
In Intel AMT Release 6.0 
  and later releases value is 
  "CIM_RedirectionService"

Qualifiers:
-------------
Key
MaxLen=256


  

  





SystemName Key 
public string SystemName



  
General Information:
The Name of the scoping 
  System.

Product Specific Usage:
In Intel AMT Release 6.0 and 
  later releases value is "Intel(r) 
  AMT"

Qualifiers:
-------------
Key
MaxLen=20
Propagated=CIM_System.Name


  

  





SystemCreationClassName Key 
public string SystemCreationClassName



  
General Information:
The CreationClassName of the scoping 
  System.

Product Specific Usage:
In Intel AMT Release 6.0 and 
  later releases value is 
  "CIM_ComputerSystem"

Qualifiers:
-------------
Key
MaxLen=20
Propagated=CIM_System.CreationClassName


  

  





ElementName 
public string ElementName



  
General Information:
A user-friendly name for the object. This 
  property allows each instance to define a user-friendly name in addition to 
  its key properties, identity data, and description information. 
Note that 
  the Name property of ManagedSystemElement is also defined as a user-friendly 
  name. But, it is often subclassed to be a Key. It is not reasonable that the 
  same property can convey both identity and a user-friendly name, without 
  inconsistencies. Where Name exists and is not a Key (such as for instances of 
  LogicalDevice), the same information can be present in both the Name and 
  ElementName properties. Note that if there is an associated instance of 
  CIM_EnabledLogicalElementCapabilities, restrictions on this properties may 
  exist as defined in ElementNameMask and MaxElementNameLen properties defined 
  in that class.

Product Specific Usage:
In Intel AMT Release 
  6.0 and later releases value is "Intel(r) ME KVM Redirection 
  Service"

Qualifiers:
-------------
MaxLen=40


  

  





EnabledState 
public uint16 EnabledState



  
General Information:
EnabledState is an integer enumeration that 
  indicates the enabled and disabled states of an element. It can also indicate 
  the transitions between these requested states. For example, shutting down 
  (value=4) and starting (value=10) are transient states between enabled and 
  disabled. The following text briefly summarizes the various enabled and 
  disabled states: 
Enabled (2) indicates that the element is or could be 
  executing commands, will process any queued commands, and queues new requests. 
  
Disabled (3) indicates that the element will not execute commands and will 
  drop any new requests. 
Shutting Down (4) indicates that the element is in 
  the process of going to a Disabled state. 
Not Applicable (5) indicates the 
  element does not support being enabled or disabled. 
Enabled but Offline 
  (6) indicates that the element might be completing commands, and will drop any 
  new requests. 
Test (7) indicates that the element is in a test state. 
  
Deferred (8) indicates that the element might be completing commands, but 
  will queue any new requests. 
Quiesce (9) indicates that the element is 
  enabled but in a restricted mode.
Starting (10) indicates that the element 
  is in the process of going to an Enabled state. New requests are 
  queued.

Product Specific Usage:
Only states 2 (Enabled) or 3 
  (Disabled) values are applicable. 
"Enabled" value means that the feature 
  is enabled by remoteinterface (network). 
"Disabled" value means that the 
  feature is disabled by remote (network) interface - Remote enablement 
  modification is controlled via 
CIM_KVMRedirectionSAP.RequestStateChange(). 
  


Qualifiers:
-------------
ValueMap={0, 1, 2, 3, 4, 5, 
  6, 7, 8, 9, 10, 11..32767, 32768..65535}
Values={Unknown, Other, Enabled, 
  Disabled, Shutting Down, Not Applicable, Enabled but Offline, In Test, 
  Deferred, Quiesce, Starting, DMTF Reserved, Vendor 
  Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.OtherEnabledState}


  

  





RequestedState 
public uint16 RequestedState



  
General Information:
RequestedState is an integer enumeration 
  that indicates the last requested or desired state for the element, 
  irrespective of the mechanism through which it was requested. The actual state 
  of the element is represented by EnabledState. This property is provided to 
  compare the last requested and current enabled or disabled states. Note that 
  when EnabledState is set to 5 ("Not Applicable"), then this property has no 
  meaning. Refer to the EnabledState property description for explanations of 
  the values in the RequestedState enumeration. 
"Unknown" (0) indicates the 
  last requested state for the element is unknown.
Note that the value "No 
  Change" (5) has been deprecated in lieu of indicating the last requested state 
  is "Unknown" (0). If the last requested or desired state is unknown, 
  RequestedState should have the value "Unknown" (0), but may have the value "No 
  Change" (5).Offline (6) indicates that the element has been requested to 
  transition to the Enabled but Offline EnabledState. 
It should be noted 
  that there are two new values in RequestedState that build on the statuses of 
  EnabledState. These are "Reboot" (10) and "Reset" (11). Reboot refers to doing 
  a "Shut Down" and then moving to an "Enabled" state. Reset indicates that the 
  element is first "Disabled" and then "Enabled". The distinction between 
  requesting "Shut Down" and "Disabled" should also be noted. Shut Down requests 
  an orderly transition to the Disabled state, and might involve removing power, 
  to completely erase any existing state. The Disabled state requests an 
  immediate disabling of the element, such that it will not execute or accept 
  any commands or processing requests. 

This property is set as the 
  result of a method invocation (such as Start or StopService on CIM_Service), 
  or can be overridden and defined as WRITEable in a subclass. The method 
  approach is considered superior to a WRITEable property, because it allows an 
  explicit invocation of the operation and the return of a result code. 
  

If knowledge of the last RequestedState is not supported for the 
  EnabledLogicalElement, the property shall be NULL or have the value 12 "Not 
  Applicable".

Qualifiers:
-------------
ValueMap={0, 2, 3, 
  4, 5, 6, 7, 8, 9, 10, 11, 12, .., 32768..65535}
Values={Unknown, Enabled, 
  Disabled, Shut Down, No Change, Offline, Test, Deferred, Quiesce, Reboot, 
  Reset, Not Applicable, DMTF Reserved, Vendor 
  Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.EnabledState}


  

  





RedirectionServiceType 
public uint16[] RedirectionServiceType



  
General Information:
An enumerated array indicating the type(s) 
  of Redirection supported by this Service. This value is set to the type of 
  redirection service that this service represents. A value set to 2 = "Text" 
  shall indicate a Text Console Redirection service. A value set to 3 = "KVM" 
  shall indicate a Keyboard, Mouse and Video Console Redirection service. A 
  value set to 4 = "USB" shall indicate a USB Redirection service. A value set 
  to 5 = "media" shall indicate a traditional Media Redirection 
  service.

Product Specific Usage:
In Intel AMT Release 6.0 and 
  later releases value is 3 
  (KVM)

Qualifiers:
-------------
ValueMap={0, 1, 2, 3, 4, 
  5, 6..32767, 32768..65535}
Values={Unknown, Other, Text, KVM, USB, Media, 
  DMTF Reserved, Vendor 
  Specified}
ModelCorrespondence={CIM_RedirectionService.OtherRedirectionServiceType}


  

  





MaxCurrentEnabledSAPs 
public uint16 MaxCurrentEnabledSAPs



  
General Information:
Maximum number of concurrently enabled 
  redirection SAPs. The Service may have multiple (more than this number) SAPs 
  associated with it. However, the number of Active SAPs (EnabledState=Enabled) 
  associated with this Service instance cannot exceed this number. This 
  limitation could come from hardware limitations (e.g. one COM port can only 
  redirect the text to one console), or from any other software resource 
  limitations.

  

  





SharingMode 
public uint16 SharingMode



  
General Information:
An enumeration specifying the impact of 
  enabling the redirection of the text console flow on the original destination 
  of the flow. The original destination is modeled as a concrete subclass of 
  LogicalDevice and associated to this service using a ServiceAffectsElement 
  association). If this value is Exclusive, it shall mean that when the element 
  flow is actively being redirected, then the element being redirected cannot be 
  accessed at the original destination. If this value is Shared, it shall mean 
  that when the element flow is actively being redirected, then the element 
  being redirected can still be accessed at the original 
  destination.

Product Specific Usage:
In Intel AMT Release 6.0 
  and later releases value is 3 
  (Shared)

Qualifiers:
-------------
ValueMap={0, 2, 
  3}
Values={Unknown, Exclusive, Shared}


  

  






  
  

    Method 
Detail


RequestStateChange
public uint32 RequestStateChange([IN]uint16 RequestedState, [OUT]REF CIM_ConcreteJob Job, [IN]datetime TimeoutPeriod)



  
Permission Information:
Permitted realms: 
  ADMIN_SECURITY_ADMINISTRATION_REALM, ADMIN_SECURITY_SOLIDER_REALM, 
  ADMIN_SECURITY_LOCAL_SYSTEM_REALM

General 
  Information:
Requests that the state of the element be changed to the 
  value specified in the RequestedState parameter. When the requested state 
  change takes place, the EnabledState and RequestedState of the element will be 
  the same. Invoking the RequestStateChange method multiple times could result 
  in earlier requests being overwritten or lost. 
A return code of 0 shall 
  indicate the state change was successfully initiated. 
A return code of 3 
  shall indicate that the state transition cannot complete within the interval 
  specified by the TimeoutPeriod parameter. 
A return code of 4096 (0x1000) 
  shall indicate the state change was successfully initiated, a ConcreteJob has 
  been created, and its reference returned in the output parameter Job. Any 
  other return code indicates an error condition.

Product Specific 
  Usage:
Method is not supported - returns value 1 (Not 
  Supported)

Qualifiers:
-------------
ValueMap={0, 1, 2, 3, 
  4, 5, 6, .., 4096, 4097, 4098, 4099, 4100..32767, 
  32768..65535}
Values={Completed with No Error, Not Supported, Unknown or 
  Unspecified Error, Cannot complete within Timeout Period, Failed, Invalid 
  Parameter, In Use, DMTF Reserved, Method Parameters Checked - Job Started, 
  Invalid State Transition, Use of Timeout Parameter Not Supported, Busy, Method 
  Reserved, Vendor 
  Specific}
ModelCorrespondence={CIM_EnabledLogicalElement.RequestedState}


Parameters:
--------------

  

    
RequestedState 
    
General Information:
The state requested for the element. This 
    information will be placed into the RequestedState property of the instance 
    if the return code of the RequestStateChange method is 0 ('Completed with No 
    Error'), or 4096 (0x1000) ('Job Started'). Refer to the description of the 
    EnabledState and RequestedState properties for the detailed explanations of 
    the RequestedState 
    values.

Qualifiers:
-------------
IN
ValueMap={2, 3, 
    4, 6, 7, 8, 9, 10, 11, .., 32768..65535}
Values={Enabled, Disabled, Shut 
    Down, Offline, Test, Defer, Quiesce, Reboot, Reset, DMTF Reserved, Vendor 
    Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.RequestedState}


    
Job 
    
General Information:
May contain a reference to the 
    ConcreteJob created to track the state transition initiated by the method 
    invocation.

Qualifiers:
-------------
IN=false
OUT


    
TimeoutPeriod 
    
General Information:
A timeout period that specifies the 
    maximum amount of time that the client expects the transition to the new 
    state to take. The interval format must be used to specify the 
    TimeoutPeriod. A value of 0 or a null parameter indicates that the client 
    has no time requirements for the transition. 
If this property does not 
    contain 0 or null and the implementation does not support this parameter, a 
    return code of 'Use Of Timeout Parameter Not Supported' shall be 
    returned.

Qualifiers:
-------------
IN







Get
public  Get([OUT]CIM_RedirectionService Instance)



  
Permission Information:
Permitted realms: 
  ADMIN_SECURITY_ADMINISTRATION_REALM, ADMIN_SECURITY_SOLIDER_REALM, 
  ADMIN_SECURITY_GENERAL_INFO_REALM

General Information:
Gets 
  the representation of the instance





Pull
public  Pull([IN]String EnumerationContext, [IN]String MaxElements)



  
Permission Information:
All users permitted to use method, only 
  instances to whom the user has permissions will be returned

General 
  Information:
Pulls instances of this class, following an Enumerate 
  operation





Enumerate
public  Enumerate()



  
Permission Information:
All users permitted to use 
  method

General Information:
Enumerates the instances of this 
  class





Release
public  Release([IN]String EnumerationContext)



  
Permission Information:
All users permitted to use 
  method

General Information:
Releases an enumeration 
  context






  
  

    SUMMARY: NESTED | FIELD | METHOD
  

  

    DETAIL: FIELD | METHOD



  
  

    
      
Copyright © 2006-2022, Intel 
      Corporation. All rights 
reserved.