Class CIM_WiFiEndpointCapabilities
Used in features: Wireless
Compatible with the following Intel AMT Releases: 4.0, 6.0, 6.1, 6.2,
7.0, 8.0, 8.1, 9.0, 9.5, 10.0, 11.0
CIM_ManagedElement
CIM_Capabilities
CIM_EnabledLogicalElementCapabilities
CIM_WiFiEndpointCapabilities
class CIM_WiFiEndpointCapabilities
- extends CIM_EnabledLogicalElementCapabilities
General Information:
Describes the capabilities of a
WiFiEndpoint.
Qualifiers:
-------------
Version=2.22.0
UMLPackagePath=CIM::Network::Wireless
Supported Fields
Summary |
boolean
|
ElementNameEditSupported
Boolean indicating whether the ElementName can be
modified.
|
string
|
InstanceID Within the scope of the instantiating Namespace,
InstanceID opaquely and uniquely identifies an instance of this class . .
.
|
string
|
ElementName The
user friendly name for this instance of Capabilities . . .
|
uint16[5]
|
SupportedEncryptionMethods
The set of IEEE 802.11 encryption methods supported by the
associated WifiEndpoint . . .
|
uint16[8]
|
SupportedAuthenticationMethods
The set of IEEE 802.11 authentication methods supported by the
associated WifiEndpoint. * Other (1): shall indicate that at least one
authentication method not specified in the list below is supported . .
.
|
Methods Summary |
|
Get(Instance) Gets the
representation of the instance
|
|
Pull(EnumerationContext,
MaxElements) Pulls instances of this class, following an
Enumerate operation
|
|
Enumerate()
Enumerates the instances of this class
|
|
Release(EnumerationContext)
Releases an enumeration context
|
ElementNameEditSupported
public boolean ElementNameEditSupported
- General Information:
Boolean indicating whether the ElementName
can be
modified.
Qualifiers:
-------------
MappingStrings={FC-SWAPI.INCITS-T11|SWAPI_UNIT_CONFIG_CAPS_T|EditName}
ModelCorrespondence={CIM_ManagedElement.ElementName}
InstanceID
public string InstanceID
- General Information:
Within the scope of the instantiating
Namespace, InstanceID opaquely and uniquely identifies an instance of this
class. In order to ensure uniqueness within the NameSpace, the value of
InstanceID SHOULD be constructed using the following 'preferred' algorithm:
<OrgID>:<LocalID>
Where <OrgID> and <LocalID>
are separated by a colon ':', and where <OrgID> MUST include a
copyrighted, trademarked or otherwise unique name that is owned by the
business entity creating/defining the InstanceID, or is a registered ID that
is assigned to the business entity by a recognized global authority (This is
similar to the <Schema Name>_<Class Name> structure of Schema
class names.) In addition, to ensure uniqueness <OrgID> MUST NOT contain
a colon (':'). When using this algorithm, the first colon to appear in
InstanceID MUST appear between <OrgID> and <LocalID>.
<LocalID> is chosen by the business entity and SHOULD not be re-used
to identify different underlying (real-world) elements. If the above
'preferred' algorithm is not used, the defining entity MUST assure that the
resultant InstanceID is not re-used across any InstanceIDs produced by this or
other providers for this instance's NameSpace.
For DMTF defined instances,
the 'preferred' algorithm MUST be used with the <OrgID> set to
'CIM'.
Product Specific Usage:
In Intel AMT Release 6.0 and
later releases value is "Intel(r) AMT:WiFi Endpoint
Capabilities"
Qualifiers:
-------------
Key
Override=InstanceID
MaxLen=45
ElementName
public string ElementName
- General Information:
The user friendly name for this instance of
Capabilities. In addition, the user friendly name can be used as a index
property for a search of query. (Note: Name does not have to be unique within
a namespace.)
Product Specific Usage:
In Intel AMT Release
6.0 and later releases value is "Intel(r) AMT:WiFi Endpoint
Capabilities"
Qualifiers:
-------------
Required
Override=ElementName
MaxLen=45
SupportedEncryptionMethods
public uint16[5] SupportedEncryptionMethods
- General Information:
The set of IEEE 802.11 encryption methods
supported by the associated WifiEndpoint. Shall contain one or more of the
values below.
* Other (1): shall indicate that at least one encryption
method not specified in the list below is supported. If
SupportedEncryptionMethods contains 1, OtherSupportedEncryptionMethods shall
not be NULL and shall not be empty.
* WEP (2): shall indicate that Wired
Equivalency Privacy (WEP) is supported. SupportedEncryptionMethods shall
contain 2 only if SupportedAuthenticationMethods contains 2 ("Open System") or
3 ("Shared Key").
* TKIP (3): shall indicate that the Temporal Key
Integrity Protocol (TKIP) is supported. SupportedEncryptionMethods shall
contain 3 only if SupportedAuthenticationMethods contains 4 ("WPA PSK"), 5
("WPA IEEE 802.1x"), 6 ("WPA2 PSK"), or 7 ("WPA2 IEEE 802.1x").
* CCMP (4):
shall indicate that the Counter Mode with Cipher Block Chaining Message
Authentication Code Protocol (CCMP) is supported. SupportedEncryptionMethods
shall contain 4 only if SupportedAuthenticationMethods contains 4 ("WPA PSK"),
5 ("WPA IEEE 802.1x"), 6 ("WPA2 PSK"), or 7 ("WPA2 IEEE 802.1x").
* None
(5): shall indicate that the associated WiFiEndpoint supports connecting to a
network without encryption. SupportedEncryptionMethods shall contain 5 only if
SupportedAuthenticationMethods contains 2 ("Open System") or 3 ("Shared
Key").
* GCMP 256 (32768): shall indicate that the GCMP protocol is supported. SupportedEncryptionMethods shall contain 32768 only if
SupportedAuthenticationMethods contains 6 ("WPA2 PSK") or 7 ("WPA2 IEEE 802.1x").
Qualifiers:
-------------
ValueMap={1, 2, 3, 4, 5, 6..32767, 32768, 32769..
}
Values={Other, WEP, TKIP, CCMP, None, DMTF
Reserved, GCMP 256, Vendor Reserved}
MappingStrings={IEEE 802.11-2007 |
8}
ModelCorrespondence={CIM_WiFiEndpoint.EncryptionMethod}
SupportedAuthenticationMethods
public uint16[8] SupportedAuthenticationMethods
- General Information:
The set of IEEE 802.11 authentication
methods supported by the associated WifiEndpoint. * Other (1): shall indicate
that at least one authentication method not specified in the list below is
supported. If SupportedAuthenticationMethods contains 1,
OtherSupportedAuthenticationMethods shall not be NULL and shall not be
empty.
* Open System (2): shall indicate that Open System authentication is
supported. SupportedAuthenticationMethods shall contain 2 only if
SupportedEncryptionMethods contains 2 ("WEP") or 5 ("None").
* Shared Key
(3): shall indicate Shared Key authentication is supported.
SupportedAuthenticationMethods shall contain 3 only if
SupportedEncryptionMethods contains 2 ("WEP") or 5 ("None").
* WPA PSK (4):
shall indicate that WPA (Wi-Fi Protected Access) PSK (Pre-Shared Key)
authentication is supported. SupportedAuthenticationMethods shall contain 4
only if SupportedEncryptionMethods contains 3 ("TKIP") or 4 ("CCMP").
* WPA
IEEE 802.1x (5): shall indicate that WPA (Wi-Fi Protected Access) IEEE 802.1x
authentication is supported. SupportedAuthenticationMethods shall contain 5
only if SupportedEncryptionMethods contains 3 ("TKIP") or 4 ("CCMP").
*
WPA2 PSK (6): shall indicate that WPA2 (Wi-Fi Protected Access Version 2) PSK
(Pre-Shared Key) authentication is supported. SupportedAuthenticationMethods
shall contain 6 only if SupportedEncryptionMethods contains 3 ("TKIP") or 4
("CCMP").
* WPA2 IEEE 802.1x (7): shall indicate that WPA2 (Wi-Fi Protected
Access Version 2) IEEE 802.1x authentication is supported.
SupportedAuthenticationMethods shall contain 7 only if
SupportedEncryptionMethods contains 3 ("TKIP") or 4
("CCMP") or 32768 ("GCMP 256").
* WPA3 SAE (32768) (Supported in Intel CSME 12.0.80.1708, Intel CSME 14.0 and later): shall indicate that WPA3 (Wi-Fi Protected Access Version 3) SAE (Simultaneous Authentication of Equals) is supported. SupportedAuthenticationMethods shall contain 32768 only if SupportedEncryptionMethods contains 4 (CCMP).
* WPA3 OWE (32769) (Supported in Intel CSME 12.0.80.1708, Intel CSME 14.0 and later): shall indicate that WPA3 (Wi-Fi Protected Access Version 3) OWE (Opportunistic Wireless Encryption) authentication is supported. SupportedAuthenticationMethods shall contain 32769 only if SupportedEncryptionMethods contains 4 (CCMP).
Qualifiers:
-------------
ValueMap={1, 2, 3, 4,
5, 6, 7, 8..32767, 32768, 32769, 32770...}
Values={Other, Open System, Shared Key, WPA PSK, WPA IEEE
802.1x, WPA2 PSK, WPA2 IEEE 802.1X, DMTF
Reserved, WPA3 SAE, WPA3 OWE, Vendor Reserved}
ArrayType=Indexed
MappingStrings={IEEE 802.11-2007 |
8}
ModelCorrespondence={CIM_WiFiEndpoint.AuthenticationMethod}
Get
public Get([OUT]CIM_WiFiEndpointCapabilities Instance)
- Permission Information:
Permitted realms:
ADMIN_SECURITY_ADMINISTRATION_REALM, ADMIN_SECURITY_GENERAL_INFO_REALM,
ADMIN_SECURITY_LOCAL_SYSTEM_REALM
General Information:
Gets
the representation of the instance
Pull
public Pull([IN]String EnumerationContext, [IN]String MaxElements)
- Permission Information:
All users permitted to use method, only
instances to whom the user has permissions will be returned
General
Information:
Pulls instances of this class, following an Enumerate
operation
Enumerate
public Enumerate()
- Permission Information:
All users permitted to use
method
General Information:
Enumerates the instances of this
class
Release
public Release([IN]String EnumerationContext)
- Permission Information:
All users permitted to use
method
General Information:
Releases an enumeration
context