SUMMARY: NESTED | FIELD | | METHOD
DETAIL: FIELD | METHOD

Class IPS_ProvisioningRecordLog

Used in features: Provisioning
Compatible with the following Intel AMT Releases: 6.2, 7.0, 8.0, 8.1, 9.0, 9.5, 10.0, 11.0 
CIM_ManagedElement
   extended by CIM_ManagedSystemElement
      extended by CIM_LogicalElement
         extended by CIM_EnabledLogicalElement
            extended by CIM_Log
               extended by CIM_RecordLog
                  extended by IPS_ProvisioningRecordLog


class IPS_ProvisioningRecordLog
 extends CIM_RecordLog


General Information:
IPS_ProvisioningRecordLog serves as an 
aggregation point for IPS_ProvisioningAuditRecord objects. 


Qualifiers:
-------------
Version=6.1.0









  
  

    Supported Fields 
      Summary

  

     string 
      
    InstanceID Key  
Within the scope of the instantiating Namespace, 
      InstanceID opaquely and uniquely identifies an instance of this class . . 
      .

  

     uint16 
      
    RequestedState 
      
RequestedState is an integer enumeration that indicates the 
      last requested or desired state for the element, irrespective of the 
      mechanism through which it was requested . . .

  

     uint16 
      
    EnabledState 
      
EnabledState is an integer enumeration that indicates the 
      enabled and disabled states of an element . . .

  

     uint16 
      
    HealthState 
      
Indicates the current health of the element . . .

  

     uint16[] 
      
    OperationalStatus 
      
Indicates the current statuses of the element . . .

  

     string 
      
    Name 
The Name property 
      defines the label by which the object is known . . .

  

     string 
      
    ElementName 
A 
      user-friendly name for the object . . .

  

     uint64 
      
    MaxNumberOfRecords 
      
Maximum number of records that can be captured in the Log . . 
      .

  

     uint64 
      
    CurrentNumberOfRecords 
      
Current number of records in the Log.

  

     uint16 
      
    OverwritePolicy 
      
OverwritePolicy is an integer enumeration that indicates 
      whether the log, represented by the CIM_Log subclasses, can overwrite its 
      entries.Unknown (0) indicates the log's overwrite policy is unknown . . 
      .

  

     uint16 
      
    LogState 
LogState is 
      an integer enumeration that indicates the current state of a log 
      represented by CIM_Log subclasses . . .




  
  

    Methods Summary

  

     uint32
    RequestStateChange(RequestedState, REF 
      Job, TimeoutPeriod) 
Requests that the state of the element be 
      changed to the value specified in the RequestedState parameter . . 
.

  

     uint32
    ClearLog() 
Requests 
      that the Log be cleared of all entries . . .

  

     
    Get(Instance) 
Gets the 
      representation of the instance

  

     
    Pull(EnumerationContext, 
      MaxElements) 
Pulls instances of this class, following an 
      Enumerate operation

  

     
    Enumerate() 
      
Enumerates the instances of this class

  

     
    Release(EnumerationContext) 
      
Releases an enumeration context




  
  

    Field 
Detail


InstanceID Key 
public string InstanceID



  
General Information:
Within the scope of the instantiating 
  Namespace, InstanceID opaquely and uniquely identifies an instance of this 
  class. 
In order to ensure uniqueness within the NameSpace, the value of 
  InstanceID SHOULD be constructed using the following 'preferred' algorithm: 
  
<OrgID>:<LocalID> 
Where <OrgID> and <LocalID> 
  are separated by a colon ':', and where <OrgID> MUST include a 
  copyrighted, trademarked or otherwise unique name that is owned by the 
  business entity creating/defining the InstanceID, or is a registered ID that 
  is assigned to the business entity by a recognized global authority (This is 
  similar to the <Schema Name>_<Class Name> structure of Schema 
  class names.) In addition, to ensure uniqueness <OrgID> MUST NOT contain 
  a colon (':'). When using this algorithm, the first colon to appear in 
  InstanceID MUST appear between <OrgID> and <LocalID>. 
  
<LocalID> is chosen by the business entity and SHOULD not be re-used 
  to identify different underlying (real-world) elements. If the above 
  'preferred' algorithm is not used, the defining entity MUST assure that the 
  resultant InstanceID is not re-used across any InstanceIDs produced by this or 
  other providers for this instance's NameSpace. 
For DMTF defined instances, 
  the 'preferred' algorithm MUST be used with the <OrgID> set to 
  'CIM'.

Qualifiers:
-------------
Key
Override=InstanceID
MaxLen=64


  

  





RequestedState 
public uint16 RequestedState



  
General Information:
RequestedState is an integer enumeration 
  that indicates the last requested or desired state for the element, 
  irrespective of the mechanism through which it was requested. The actual state 
  of the element is represented by EnabledState. This property is provided to 
  compare the last requested and current enabled or disabled states. Note that 
  when EnabledState is set to 5 ("Not Applicable"), then this property has no 
  meaning. Refer to the EnabledState property description for explanations of 
  the values in the RequestedState enumeration. 
"Unknown" (0) indicates the 
  last requested state for the element is unknown.
Note that the value "No 
  Change" (5) has been deprecated in lieu of indicating the last requested state 
  is "Unknown" (0). If the last requested or desired state is unknown, 
  RequestedState should have the value "Unknown" (0), but may have the value "No 
  Change" (5).Offline (6) indicates that the element has been requested to 
  transition to the Enabled but Offline EnabledState. 
It should be noted 
  that there are two new values in RequestedState that build on the statuses of 
  EnabledState. These are "Reboot" (10) and "Reset" (11). Reboot refers to doing 
  a "Shut Down" and then moving to an "Enabled" state. Reset indicates that the 
  element is first "Disabled" and then "Enabled". The distinction between 
  requesting "Shut Down" and "Disabled" should also be noted. Shut Down requests 
  an orderly transition to the Disabled state, and might involve removing power, 
  to completely erase any existing state. The Disabled state requests an 
  immediate disabling of the element, such that it will not execute or accept 
  any commands or processing requests. 

This property is set as the 
  result of a method invocation (such as Start or StopService on CIM_Service), 
  or can be overridden and defined as WRITEable in a subclass. The method 
  approach is considered superior to a WRITEable property, because it allows an 
  explicit invocation of the operation and the return of a result code. 
  

If knowledge of the last RequestedState is not supported for the 
  EnabledLogicalElement, the property shall be NULL or have the value 12 "Not 
  Applicable".

Qualifiers:
-------------
ValueMap={0, 2, 3, 
  4, 5, 6, 7, 8, 9, 10, 11, 12, .., 32768..65535}
Values={Unknown, Enabled, 
  Disabled, Shut Down, No Change, Offline, Test, Deferred, Quiesce, Reboot, 
  Reset, Not Applicable, DMTF Reserved, Vendor 
  Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.EnabledState}


  

  





EnabledState 
public uint16 EnabledState



  
General Information:
EnabledState is an integer enumeration that 
  indicates the enabled and disabled states of an element. It can also indicate 
  the transitions between these requested states. For example, shutting down 
  (value=4) and starting (value=10) are transient states between enabled and 
  disabled. The following text briefly summarizes the various enabled and 
  disabled states: 
Enabled (2) indicates that the element is or could be 
  executing commands, will process any queued commands, and queues new requests. 
  
Disabled (3) indicates that the element will not execute commands and will 
  drop any new requests. 
Shutting Down (4) indicates that the element is in 
  the process of going to a Disabled state. 
Not Applicable (5) indicates the 
  element does not support being enabled or disabled. 
Enabled but Offline 
  (6) indicates that the element might be completing commands, and will drop any 
  new requests. 
Test (7) indicates that the element is in a test state. 
  
Deferred (8) indicates that the element might be completing commands, but 
  will queue any new requests. 
Quiesce (9) indicates that the element is 
  enabled but in a restricted mode.
Starting (10) indicates that the element 
  is in the process of going to an Enabled state. New requests are 
  queued.

Qualifiers:
-------------
ValueMap={0, 1, 2, 3, 4, 
  5, 6, 7, 8, 9, 10, 11..32767, 32768..65535}
Values={Unknown, Other, 
  Enabled, Disabled, Shutting Down, Not Applicable, Enabled but Offline, In 
  Test, Deferred, Quiesce, Starting, DMTF Reserved, Vendor 
  Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.OtherEnabledState}


  

  





HealthState 
public uint16 HealthState



  
General Information:
Indicates the current health of the 
  element. This attribute expresses the health of this element but not 
  necessarily that of its subcomponents. The possible values are 0 to 30, where 
  5 means the element is entirely healthy and 30 means the element is completely 
  non-functional. The following continuum is defined: 
"Non-recoverable 
  Error" (30) - The element has completely failed, and recovery is not possible. 
  All functionality provided by this element has been lost. 
"Critical 
  Failure" (25) - The element is non-functional and recovery might not be 
  possible. 
"Major Failure" (20) - The element is failing. It is possible 
  that some or all of the functionality of this component is degraded or not 
  working. 
"Minor Failure" (15) - All functionality is available but some 
  might be degraded. 
"Degraded/Warning" (10) - The element is in working 
  order and all functionality is provided. However, the element is not working 
  to the best of its abilities. For example, the element might not be operating 
  at optimal performance or it might be reporting recoverable errors. 
"OK" 
  (5) - The element is fully functional and is operating within normal 
  operational parameters and without error. 
"Unknown" (0) - The 
  implementation cannot report on HealthState at this time. 
DMTF has 
  reserved the unused portion of the continuum for additional HealthStates in 
  the future.

Qualifiers:
-------------
ValueMap={0, 5, 10, 
  15, 20, 25, 30, .., 32768..65535}
Values={Unknown, OK, Degraded/Warning, 
  Minor failure, Major failure, Critical failure, Non-recoverable error, DMTF 
  Reserved, Vendor Specific}


  

  





OperationalStatus 
public uint16[] OperationalStatus



  
General Information:
Indicates the current statuses of the 
  element. Various operational statuses are defined. Many of the enumeration's 
  values are self-explanatory. However, a few are not and are described here in 
  more detail. 
"Stressed" indicates that the element is functioning, but 
  needs attention. Examples of "Stressed" states are overload, overheated, and 
  so on. 
"Predictive Failure" indicates that an element is functioning 
  nominally but predicting a failure in the near future. 
"In Service" 
  describes an element being configured, maintained, cleaned, or otherwise 
  administered. 
"No Contact" indicates that the monitoring system has 
  knowledge of this element, but has never been able to establish communications 
  with it. 
"Lost Communication" indicates that the ManagedSystem Element is 
  known to exist and has been contacted successfully in the past, but is 
  currently unreachable. 
"Stopped" and "Aborted" are similar, although the 
  former implies a clean and orderly stop, while the latter implies an abrupt 
  stop where the state and configuration of the element might need to be 
  updated. 
"Dormant" indicates that the element is inactive or quiesced. 
  
"Supporting Entity in Error" indicates that this element might be "OK" but 
  that another element, on which it is dependent, is in error. An example is a 
  network service or endpoint that cannot function due to lower-layer networking 
  problems. 
"Completed" indicates that the element has completed its 
  operation. This value should be combined with either OK, Error, or Degraded so 
  that a client can tell if the complete operation Completed with OK (passed), 
  Completed with Error (failed), or Completed with Degraded (the operation 
  finished, but it did not complete OK or did not report an error). 
"Power 
  Mode" indicates that the element has additional power model information 
  contained in the Associated PowerManagementService association. 
  
"Relocating" indicates the element is being 
  relocated.
OperationalStatus replaces the Status property on 
  ManagedSystemElement to provide a consistent approach to enumerations, to 
  address implementation needs for an array property, and to provide a migration 
  path from today's environment to the future. This change was not made earlier 
  because it required the deprecated qualifier. Due to the widespread use of the 
  existing Status property in management applications, it is strongly 
  recommended that providers or instrumentation provide both the Status and 
  OperationalStatus properties. Further, the first value of OperationalStatus 
  should contain the primary status for the element. When instrumented, Status 
  (because it is single-valued) should also provide the primary status of the 
  element.

Qualifiers:
-------------
ValueMap={0, 1, 2, 3, 
  4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, .., 
  0x8000..}
Values={Unknown, Other, OK, Degraded, Stressed, Predictive 
  Failure, Error, Non-Recoverable Error, Starting, Stopping, Stopped, In 
  Service, No Contact, Lost Communication, Aborted, Dormant, Supporting Entity 
  in Error, Completed, Power Mode, Relocating, DMTF Reserved, Vendor 
  Reserved}
ArrayType=Indexed
ModelCorrespondence={CIM_ManagedSystemElement.StatusDescriptions}


  

  





Name 
public string Name



  
General Information:
The Name property defines the label by 
  which the object is known. When subclassed, the Name property can be 
  overridden to be a Key 
  property.

Qualifiers:
-------------
MaxLen=40


  

  





ElementName 
public string ElementName



  
General Information:
A user-friendly name for the object. This 
  property allows each instance to define a user-friendly name in addition to 
  its key properties, identity data, and description information. 
Note that 
  the Name property of ManagedSystemElement is also defined as a user-friendly 
  name. But, it is often subclassed to be a Key. It is not reasonable that the 
  same property can convey both identity and a user-friendly name, without 
  inconsistencies. Where Name exists and is not a Key (such as for instances of 
  LogicalDevice), the same information can be present in both the Name and 
  ElementName properties. Note that if there is an associated instance of 
  CIM_EnabledLogicalElementCapabilities, restrictions on this properties may 
  exist as defined in ElementNameMask and MaxElementNameLen properties defined 
  in that class.

Qualifiers:
-------------
MaxLen=64


  

  





MaxNumberOfRecords 
public uint64 MaxNumberOfRecords



  
General Information:
Maximum number of records that can be 
  captured in the Log. If undefined, a value of zero should be specified.

  

  





CurrentNumberOfRecords 
public uint64 CurrentNumberOfRecords



  
General Information:
Current number of records in the 
  Log.

Qualifiers:
-------------
Gauge


  

  





OverwritePolicy 
public uint16 OverwritePolicy



  
General Information:
OverwritePolicy is an integer enumeration 
  that indicates whether the log, represented by the CIM_Log subclasses, can 
  overwrite its entries.Unknown (0) indicates the log's overwrite policy is 
  unknown. 
Wraps when Full (2) indicates that the log overwrites its entries 
  with new entries when the log has reached its maximum capacity. 
Never 
  Overwrites (7) indicates that the log never overwrites its entries by the new 
  entries.

Qualifiers:
-------------
ValueMap={0, 2, 7, .., 
  32768..65535}
Values={Unknown, Wraps When Full, Never Overwrites, DMTF 
  Reserved, Vendor Reserved}


  

  





LogState 
public uint16 LogState



  
General Information:
LogState is an integer enumeration that 
  indicates the current state of a log represented by CIM_Log subclasses. 
  LogState is to be used in conjunction with the EnabledState property to fully 
  describe the current state of the log. The following text briefly summarizes 
  the various log states: 
Unknown (0) indicates the state of the log is 
  unknown. 
Normal (2) indicates that the log is or could be executing 
  logging commands, will process any queued log entries, and will queue new 
  logging requests. 
Erasing (3) indicates that the log is being erased. 
  
Not Applicable (4) indicates the log does not support representing a log 
  state.

Qualifiers:
-------------
ValueMap={0, 2, 3, 4, .., 
  32768..65535}
Values={Unknown, Normal, Erasing, Not Applicable, DMTF 
  Reserved, Vendor 
  Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.EnabledState}


  

  






  
  

    Method 
Detail


RequestStateChange
public uint32 RequestStateChange([IN]uint16 RequestedState, [OUT]REF CIM_ConcreteJob Job, [IN]datetime TimeoutPeriod)



  
Permission Information:
Permitted realms: 
  ADMIN_SECURITY_ADMINISTRATION_REALM, 
  ADMIN_SECURITY_LOCAL_SYSTEM_REALM

General 
  Information:
Requests that the state of the element be changed to the 
  value specified in the RequestedState parameter. When the requested state 
  change takes place, the EnabledState and RequestedState of the element will be 
  the same. Invoking the RequestStateChange method multiple times could result 
  in earlier requests being overwritten or lost. 
A return code of 0 shall 
  indicate the state change was successfully initiated. 
A return code of 3 
  shall indicate that the state transition cannot complete within the interval 
  specified by the TimeoutPeriod parameter. 
A return code of 4096 (0x1000) 
  shall indicate the state change was successfully initiated, a ConcreteJob has 
  been created, and its reference returned in the output parameter Job. Any 
  other return code indicates an error 
  condition.

Qualifiers:
-------------
ValueMap={0, 1, 2, 3, 
  4, 5, 6, .., 4096, 4097, 4098, 4099, 4100..32767, 
  32768..65535}
Values={Completed with No Error, Not Supported, Unknown or 
  Unspecified Error, Cannot complete within Timeout Period, Failed, Invalid 
  Parameter, In Use, DMTF Reserved, Method Parameters Checked - Job Started, 
  Invalid State Transition, Use of Timeout Parameter Not Supported, Busy, Method 
  Reserved, Vendor 
  Specific}
ModelCorrespondence={CIM_EnabledLogicalElement.RequestedState}


Parameters:
--------------

  

    
RequestedState 
    
General Information:
The state requested for the element. This 
    information will be placed into the RequestedState property of the instance 
    if the return code of the RequestStateChange method is 0 ('Completed with No 
    Error'), or 4096 (0x1000) ('Job Started'). Refer to the description of the 
    EnabledState and RequestedState properties for the detailed explanations of 
    the RequestedState 
    values.

Qualifiers:
-------------
IN
ValueMap={2, 3, 
    4, 6, 7, 8, 9, 10, 11, .., 32768..65535}
Values={Enabled, Disabled, Shut 
    Down, Offline, Test, Defer, Quiesce, Reboot, Reset, DMTF Reserved, Vendor 
    Reserved}
ModelCorrespondence={CIM_EnabledLogicalElement.RequestedState}


    
Job 
    
General Information:
May contain a reference to the 
    ConcreteJob created to track the state transition initiated by the method 
    invocation.

Qualifiers:
-------------
IN=false
OUT


    
TimeoutPeriod 
    
General Information:
A timeout period that specifies the 
    maximum amount of time that the client expects the transition to the new 
    state to take. The interval format must be used to specify the 
    TimeoutPeriod. A value of 0 or a null parameter indicates that the client 
    has no time requirements for the transition. 
If this property does not 
    contain 0 or null and the implementation does not support this parameter, a 
    return code of 'Use Of Timeout Parameter Not Supported' shall be 
    returned.

Qualifiers:
-------------
IN







ClearLog
public uint32 ClearLog()



  
Permission Information:
Permitted realms: 
  ADMIN_SECURITY_ADMINISTRATION_REALM, 
  ADMIN_SECURITY_LOCAL_SYSTEM_REALM

General 
  Information:
Requests that the Log be cleared of all entries. 
The 
  return value should be 0 if the request was successfully executed, 1 if the 
  request is not supported, and some other value, as indicated by the 
  ValueMap/Values qualifiers, if an error 
  occurred.

Qualifiers:
-------------
ValueMap={0, 1, 2, 3, 
  4, 5, 6..0x0FFF, 0x1000..0x7FFF, 0x8000..}
Values={Completed with no error, 
  Not Supported, Unspecified Error, Timeout, Failed, Invalid Parameter, 
  DMTF_Reserved, Method_Reserved, Vendor_Reserved}






Get
public  Get([OUT]IPS_ProvisioningRecordLog Instance)



  
Permission Information:
Permitted realms: 
  ADMIN_SECURITY_LOCAL_APPS_REALM, ADMIN_SECURITY_GENERAL_INFO_REALM, 
  ADMIN_SECURITY_ADMINISTRATION_REALM, 
  ADMIN_SECURITY_LOCAL_SYSTEM_REALM

General Information:
Gets 
  the representation of the instance





Pull
public  Pull([IN]String EnumerationContext, [IN]String MaxElements)



  
Permission Information:
All users permitted to use method, only 
  instances to whom the user has permissions will be returned

General 
  Information:
Pulls instances of this class, following an Enumerate 
  operation





Enumerate
public  Enumerate()



  
Permission Information:
All users permitted to use 
  method

General Information:
Enumerates the instances of this 
  class





Release
public  Release([IN]String EnumerationContext)



  
Permission Information:
All users permitted to use 
  method

General Information:
Releases an enumeration 
  context






  
  

    SUMMARY: NESTED | FIELD | METHOD
  

  

    DETAIL: FIELD | METHOD



  
  

    
      
Copyright © 2006-2022, Intel 
      Corporation. All rights 
reserved.